diff options
Diffstat (limited to 'digital-driver/firmware')
28 files changed, 4005 insertions, 0 deletions
diff --git a/digital-driver/firmware/TinyWire-master.zip b/digital-driver/firmware/TinyWire-master.zip Binary files differnew file mode 100644 index 0000000..081f1a5 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master.zip diff --git a/digital-driver/firmware/TinyWire-master/README.md b/digital-driver/firmware/TinyWire-master/README.md new file mode 100644 index 0000000..46a5ef2 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/README.md @@ -0,0 +1,25 @@ +# Arduino TinyWire Slave Library + +Originals from <http://www.arduino.cc/playground/Code/USIi2c> + +Modified to support ATtiny44/84 + +## NOTE about reliable communication + +Since (most of) the ATTinys lack TWI module for implementing all the nitty-gritty of I2C in hardware +they will have to do some clock-stretching (at least if run at 8MHz, you may get away with more on higher clock speeds) +as specified in the I2C protocol. However some (especially "bit-banged") master implementations do not +support clock-streching (looking at you Bus pirate 3.x and [RPI][rpibug]), you will not get reliable communication +unless your master supports the full I2C protocol spec. There is a [library][pigpio] which can bit-bang I2C correctly on RPI, use that instead of the [buggy hardware][rpibug] (thanks to @brendanarnold for [that tip][pigtip]). + +You can use my [Arduino based I2C master][i2crepl] to test your TinyWire code, this uses Bus Pirate semantics +with Arduinos TWI hardware that is known to implement I2C properly. + +[i2crepl]: https://github.com/rambo/I2C/blob/master/examples/i2crepl/i2crepl.ino +[rpibug]: http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html +[pigpio]: http://abyz.co.uk/rpi/pigpio/python.html#bb_i2c_zip +[pigtip]: https://github.com/rambo/TinyWire/issues/14#issuecomment-125325081 + +## delayMicroseconds + +See this issue: <https://github.com/rambo/TinyWire/issues/8> (remember to declare the function void if you copy-paste it verbatim) diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/TinyWireS.cpp b/digital-driver/firmware/TinyWire-master/TinyWireS/TinyWireS.cpp new file mode 100644 index 0000000..783e8e7 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/TinyWireS.cpp @@ -0,0 +1,91 @@ +/*
+ TinyWireS.cpp - a wrapper class for Don Blake's usiTwiSlave routines.
+ Provides TWI/I2C Slave functionality on ATtiny processers in Arduino environment.
+ 1/23/2011 BroHogan - brohoganx10 at gmail dot com
+
+ **** See TinyWireS.h for Credits and Usage information ****
+
+ This library is free software; you can redistribute it and/or modify it under the
+ terms of the GNU General Public License as published by the Free Software
+ Foundation; either version 2.1 of the License, or any later version.
+ This program is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ PARTICULAR PURPOSE. See the GNU General Public License for more details.
+*/
+
+extern "C" {
+ #include <inttypes.h>
+ #include "usiTwiSlave.h"
+ #include <avr/interrupt.h>
+ }
+
+#include "TinyWireS.h"
+#include "Arduino.h"
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+USI_TWI_S::USI_TWI_S(){
+}
+
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+void USI_TWI_S::begin(uint8_t slaveAddr){ // initialize I2C lib
+ usiTwiSlaveInit(slaveAddr);
+}
+
+void USI_TWI_S::send(uint8_t data){ // send it back to master
+ usiTwiTransmitByte(data);
+}
+
+uint8_t USI_TWI_S::available(){ // the bytes available that haven't been read yet
+ return usiTwiAmountDataInReceiveBuffer();
+ //return usiTwiDataInReceiveBuffer(); // This is wrong as far as the Wire API is concerned since it returns boolean and not amount
+}
+
+uint8_t USI_TWI_S::receive(){ // returns the bytes received one at a time
+ return usiTwiReceiveByte();
+}
+
+// sets function called on slave write
+void USI_TWI_S::onReceive( void (*function)(uint8_t) )
+{
+ usi_onReceiverPtr = function;
+}
+
+// sets function called on slave read
+void USI_TWI_S::onRequest( void (*function)(void) )
+{
+ usi_onRequestPtr = function;
+}
+
+// This routine is no longer used now that the usiTwiSlave is completely
+// interrupt driven. The function is maintained here so that programs
+// written for the pre-interrupt driven version will still compile and function.
+void TinyWireS_stop_check()
+{
+ // empty functions
+}
+
+// Implement a delay loop that checks for the stop bit (basically direct copy of the stock arduino implementation from wiring.c)
+// I don't think this function is necessary now that the
+// usiTwiSlave is completely interrupt driven. I'm not sure, and the function is
+// behaviorally harmless because TinyWireS_stop_check() is empty, so I'm leaving it alone.
+void tws_delay(unsigned long ms)
+{
+ uint16_t start = (uint16_t)micros();
+ while (ms > 0)
+ {
+ TinyWireS_stop_check();
+ if (((uint16_t)micros() - start) >= 1000)
+ {
+ ms--;
+ start += 1000;
+ }
+ }
+}
+
+// Preinstantiate Objects //////////////////////////////////////////////////////
+
+USI_TWI_S TinyWireS = USI_TWI_S();
+
diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/TinyWireS.h b/digital-driver/firmware/TinyWire-master/TinyWireS/TinyWireS.h new file mode 100644 index 0000000..ccef042 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/TinyWireS.h @@ -0,0 +1,64 @@ +/*
+ TinyWireS.h - a wrapper class for Don Blake's usiTwiSlave routines.
+ Provides TWI/I2C Slave functionality on ATtiny processers in Arduino environment.
+ 1/23/2011 BroHogan - brohoganx10 at gmail dot com
+
+ Major credit and thanks to Don Blake for his usiTwiSlave code which makes this possible
+ http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=51467&start=all&postdays=0&postorder=asc
+ (Changed #define USI_START_COND_INT USISIF (was USICIF) in usiTwiSlave.h)
+
+ NOTE! - It's very important to use pullups on the SDA & SCL lines! More so than with the Wire lib.
+ Current Rx & Tx buffers set at 32 bytes - see usiTwiSlave.h
+
+ USAGE is modeled after the standard Wire library . . .
+ Put in setup():
+ TinyWireS.begin(I2C_SLAVE_ADDR); // initialize I2C lib & setup slave's address (7 bit - same as Wire)
+
+ To Receive:
+ someByte = TinyWireS.available(){ // returns the number of bytes in the received buffer
+ someByte = TinyWireS.receive(){ // returns the next byte in the received buffer
+
+ To Send:
+ TinyWireS.send(uint8_t data){ // sends a requested byte to master
+
+ TODO: (by others!)
+ - onReceive and onRequest handlers are not implimented.
+ - merge this class with TinyWireM for master & slave support in one library
+
+ This library is free software; you can redistribute it and/or modify it under the
+ terms of the GNU General Public License as published by the Free Software
+ Foundation; either version 2.1 of the License, or any later version.
+ This program is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ PARTICULAR PURPOSE. See the GNU General Public License for more details.
+*/
+
+#ifndef TinyWireS_h
+#define TinyWireS_h
+
+#include <inttypes.h>
+
+
+class USI_TWI_S
+{
+ private:
+ //static uint8_t USI_BytesAvail;
+
+ public:
+ USI_TWI_S();
+ void begin(uint8_t I2C_SLAVE_ADDR);
+ void send(uint8_t data);
+ uint8_t available();
+ uint8_t receive();
+ void onReceive( void (*)(uint8_t) );
+ void onRequest( void (*)(void) );
+};
+
+void TinyWireS_stop_check();
+// Implement a delay loop that checks for the stop bit (basically direct copy of the stock arduino implementation from wiring.c)
+void tws_delay(unsigned long);
+
+extern USI_TWI_S TinyWireS;
+
+#endif
+
diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/avr_usi_i2c_master.pdf b/digital-driver/firmware/TinyWire-master/TinyWireS/avr_usi_i2c_master.pdf Binary files differnew file mode 100644 index 0000000..dc8f460 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/avr_usi_i2c_master.pdf diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/avr_usi_i2c_slave.pdf b/digital-driver/firmware/TinyWire-master/TinyWireS/avr_usi_i2c_slave.pdf Binary files differnew file mode 100644 index 0000000..e4704c7 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/avr_usi_i2c_slave.pdf diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/examples/TinyWireS_Stress_Master/TinyWireS_Stress_Master.ino b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/TinyWireS_Stress_Master/TinyWireS_Stress_Master.ino new file mode 100644 index 0000000..d50adb7 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/TinyWireS_Stress_Master/TinyWireS_Stress_Master.ino @@ -0,0 +1,184 @@ +// --------------------------------- +// Stress test program/example for TinyWireS I2C library. +// Run this master program on the Arduino Uno R3. +// Run the other slave program on the Attiny. +// --------------------------------- +// Written by Scott Hartog, 2/6/2016 +// This is the I2C master program which runs on on a regular Arduino +// (not a AtTiny). This program uses the regular Wire library from the Arduino IDE. +// +// It performs these steps in a loop: +// 1. picks a random number of bytes between 1 and 12 +// 2. sends that many bytes of random data to the AtTiny slave within +// a single Wire.beginTransmission() / Wire.write() / Wire.endTransmission() set +// 3. reads that same number of bytes back with a single Wire.requestFrom() call +// 4. compares the received data to the originally transmitted data +// 5. displays the number of requests, number of requests with mismatches, +// and enough of the data so that the operator can tell it's working. +// +#include <Wire.h> + +// BREADBOARD SETUP: +// Arduino Uno R3 (D18/SDA) = I2C SDA +// connect to SDA on slave with external pull-up (~4.7K) +// Arduino Uno R3 (D19/SCL) = I2C SCL +// connect to SCL on slave with external pull-up (~4.7K) +// Arduino Uno R3 (D2) +// connect to !RST on slave +// Can alternatively connect !RST on slave to the Ardiuno "!RESET" pin + +#define I2C_SLAVE_ADDR 0x26 // i2c slave address (38, 0x26) + +#if defined(ESP8266) + // pins that work for Monkey Board ESP8266 12-E + // SCL=5, SDA=4 + #define SLAVE_RESET_PIN 2 + #define ALL_OK_LED_PIN 16 + #define OK_LED_PIN 14 + #define ERROR_LED_PIN 13 +#else + // pins that work for Micro Pro, Uno, Mega 2560 + // reference documentation for SCL and SDA pin locations + // Uno SDA=D18, SCL=D19 + #define SLAVE_RESET_PIN 6 + #define ALL_OK_LED_PIN 9 + #define OK_LED_PIN 7 + #define ERROR_LED_PIN 8 +#endif + +uint16_t count = 0; // total number of passes so far +uint16_t error_count = 0; // total errors encountered so far + +char c_buf[64]; // for creating messages + +void setup() +{ + // set pin modes + pinMode(SLAVE_RESET_PIN,OUTPUT); // active low reset to slave device + pinMode(OK_LED_PIN,OUTPUT); // indicates last transaction matched + pinMode(ALL_OK_LED_PIN,OUTPUT); // indicates all transactions so far have matched + pinMode(ERROR_LED_PIN,OUTPUT); // indicates last transaction mismatched + + // init the serial port + Serial.begin(9600); + + // print some useful pinnout info for the Arduino + //Serial.println(String("SCL:")+String(SCL)+String(", SDA:")+String(SDA)); + //Serial.println(String("MOSI:")+String(MOSI)+String(", SCK:")+String(SCK)); + + // init the Wire object (for I2C) + Wire.begin(); + + // init the i2c clock + // default is 100kHz if not changed + // Wire.setClock(400000L); // 400kHz + + // reset the slave + digitalWrite(SLAVE_RESET_PIN, LOW); + delay(10); + digitalWrite(SLAVE_RESET_PIN, HIGH); + + // set the all okay pin high + digitalWrite(ALL_OK_LED_PIN, HIGH); + + // wait for slave to finish any init sequence + delay(2000); +} + +void loop() +{ + uint8_t i; + uint8_t req_rtn; // num bytes returned by requestFrom() call + uint8_t rand_byte_count; + uint8_t out_rand[16]; // data written from master + uint8_t in_rand[16]; // data read back from slave + + bool mismatch; + + // count total number of request + count++; + + // compute random number of bytes for this pass + rand_byte_count = random(16) + 1; + + // force the first three requests to be small so that the tx buffer doesn't overflow + // instantly and the user can see at least one successful transaction and some + // mismtaches before the usiTwiSlave.c library hangs on the line "while ( !txCount );". + if (count <= 3) rand_byte_count = 2; + + // generate, save, and send N random byte values + Wire.beginTransmission(I2C_SLAVE_ADDR); + for (i = 0; i < rand_byte_count; i++) + Wire.write(out_rand[i] = random(256)); + Wire.endTransmission(); + + // delay 20 milliseconds to accomodate slave onReceive() callback + // function. The actual time that slave takes is application dependent, but + // just storing the master's transmitted data does not take + // anywhere near 20ms. + delay(20); + + // read N bytes from slave + req_rtn = Wire.requestFrom(I2C_SLAVE_ADDR, (int)rand_byte_count); // Request N bytes from slave + for (i = 0; i < req_rtn; i++) + in_rand[i] = Wire.read(); + + // compare in/out data values + mismatch = false; + for (i = 0; i < rand_byte_count; i++) + mismatch = mismatch || (out_rand[i] != in_rand[i]); + + // increment the error counter if the number of byte variables don't match or + // if the data itself doesn't match + if (mismatch || (rand_byte_count != req_rtn)) + { + error_count++; + digitalWrite(ERROR_LED_PIN, HIGH); + digitalWrite(OK_LED_PIN, LOW); + // If there's ever an error, reset the ALL_OK_LED + // and it is not set again until the master resets. + digitalWrite(ALL_OK_LED_PIN, LOW); + } + else + { + digitalWrite(ERROR_LED_PIN, LOW); + digitalWrite(OK_LED_PIN, HIGH); + } + + // The rest of the program just displays the results to the serial port + + // display total requests so far and error count so far + snprintf(c_buf, sizeof(c_buf), "req: %3d,err: %3d", count, error_count); + Serial.println(c_buf); + + // display the random byte count, the number of bytes read back, and "MATCH"/"MISMATCH" + snprintf(c_buf, sizeof(c_buf), "size: %2d/%2d,%s", rand_byte_count, req_rtn, rand_byte_count != req_rtn?"MISMATCH <<--- !!!":"MATCH"); + Serial.println(c_buf); + + // display whether the data compare matched or mismatched + snprintf(c_buf, sizeof(c_buf), "data: %s", mismatch?"MISMATCH <<--- !!!":"MATCH"); + Serial.println(c_buf); + + // send up to three tx/rx bytes so that random data can be + // visually verified + if (rand_byte_count >= 1) + { + snprintf(c_buf, sizeof(c_buf), "rand[0]: %02x/%02x", out_rand[0], in_rand[0]); + Serial.println(c_buf); + } + + if (rand_byte_count >= 2) + { + snprintf(c_buf, sizeof(c_buf), "rand[1]: %02x/%02x", out_rand[1], in_rand[1]); + Serial.println(c_buf); + } + + if (rand_byte_count >= 3) + { + snprintf(c_buf, sizeof(c_buf), "rand[2]: %02x/%02x", out_rand[2], in_rand[2]); + Serial.println(c_buf); + } + + // delay 1 second so user can watch results + delay(1000); +} diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/examples/TinyWireS_Stress_Slave/TinyWireS_Stress_Slave.ino b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/TinyWireS_Stress_Slave/TinyWireS_Stress_Slave.ino new file mode 100644 index 0000000..c7fbe41 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/TinyWireS_Stress_Slave/TinyWireS_Stress_Slave.ino @@ -0,0 +1,143 @@ +// --------------------------------- +// Stress test program/example for TinyWireS I2C library. +// Run this slave program on the Attiny. +// Run the other master program on the Arduino Uno R3. +// --------------------------------- +// // Written by Scott Hartog, 2/6/2016, to stress test the TinyWireS library. +// https://github.com/rambo/TinyWire +// +// This project uses the Tiny85 as an I2C slave. +// +// The slave program using TinyWireS, running on a Attiny85, receives +// N bytes of random data in a single receiveEvent() callback and +// stores that data in a global buffer. It then responds the first requestEvent() +// callback with that same data. The requestEvent() callback overwrites the data +// buffer with zeros after responding so it will only respond correctly to the +// first requestEvent() callback after each receiveEvent() callback. Subsequent +// requestEvent() will respond with 0xff for all data bytes. +// +// +// SETUP: +// AtTiny Pin 5 (PB0/SDA) = I2C SDA +// connect to SDA on master with external pull-up (~4.7K) +// AtTiny Pin 7 (PB0/SCL) = I2C SCL +// connect to SCL on master with external pull-up (~4.7K) +// AtTiny Pin 1 (PB5/!RST) +// connect to reset on master (or just pull-up) +// +// Please see credits and usage for usiTwiSlave and TinyWireS in the .h files of +// those libraries. + +#include <avr/sleep.h> +#include <avr/wdt.h> +#include "TinyWireS.h" // wrapper class for I2C slave routines + +#define I2C_SLAVE_ADDR 0x26 // i2c slave address (38, 0x26) + +// turns on code that makes the Tiny85 sleep between transactions +// This is optional. The Tiny85 current drops from +// about 2mA to about 20uA when the CPU is put into +// PowerDown sleep mode. +#define USE_CPU_SLEEP + +// global buffer to store data sent from the master. +uint8_t master_data[16]; +// global variable to number of bytes sent from the master. +uint8_t master_bytes; + +// Gets called when the ATtiny receives an i2c write slave request +// This routine runs from the usiTwiSlave interrupt service routine (ISR) +// so interrupts are disabled while it runs. +void receiveEvent(uint8_t num_bytes) +{ + uint8_t i; + + // save the number of bytes sent from the master + master_bytes = num_bytes; + + // store the data from the master into the data buffer + for (i = 0; i < master_bytes; i++) + master_data[i] = TinyWireS.receive(); + +} + +// Gets called when the ATtiny receives an i2c read slave request +// This routine runs from the usiTwiSlave interrupt service routine (ISR) +// so interrupts are disabled while it runs. +void requestEvent() +{ + uint8_t i; + + // send the data buffer back to the master + for (i = 0; i < master_bytes; i++) + TinyWireS.send(master_data[i]); + + // corrupt the byte values in the data buffer + // so that any subsequent call won't match + for (i = 0; i < master_bytes; i++) + master_data[i] += 0x5a; + + // corrupt length of the request, but don't make it zero + + // if the usiTwiSlave.c is working fine, then this number is completely irrelevant + // because the requestEvent() callback will not be called again until + // after the next receiveEvent() callback, so the master_data and + // master_bytes variables will be overwritten by that call. + + // If the usiTwiSlave.c has the issue of calling the requestFrom() callback + // for each byte sent, the buffer will accumulate by this amount *for each byte + // in the original request*. (This problem is fixed in the recent version.) + // + // Making it zero will obscure the 1-byte send issue in the usiTwiSlave.c + // that is being tested. + // Making it small will allow a few requests to succeed before the tx buffer + // overflows and the usiTwiSlave.c hangs on the "while ( tmphead == txTail );" + // line + master_bytes = 2; +} + +void setup() +{ + //pinMode(1,OUTPUT); // This pin can be used for rudimentary debug + + // initialize the TinyWireS and usiTwiSlave libraries + TinyWireS.begin(I2C_SLAVE_ADDR); // init I2C Slave mode + + // register the onReceive() callback function + TinyWireS.onReceive(receiveEvent); + + // register the onRequest() callback function + TinyWireS.onRequest(requestEvent); + + // disable the watchdog timer so that it doesn't + // cause power-up, code is from datasheet + // Clear WDRF in MCUSR – MCU Status Register + // MCUSR provides information on which reset source caused an MCU Reset. + MCUSR = 0x00; + // WDTCR - Watchdog Timer Control Register + // Write logical one to WDCE and WDE (must be done before disabling) + WDTCR |= ( _BV(WDCE) | _BV(WDE) ); + // Turn off WDT + WDTCR = 0x00; + +#ifdef USE_CPU_SLEEP + // enable power down sleep mode + set_sleep_mode(SLEEP_MODE_PWR_DOWN); // sleep mode + sleep_enable(); +#endif + + sei(); // enable interrupts + +} + +void loop() +{ + +#ifdef USE_CPU_SLEEP + // optionally put the CPU to sleep. It will be woken by a USI interrupt + // when it sees a "start condition" on the I2C bus. Everything interesting + // happens in the usiTwiSlave ISR. + sleep_cpu(); +#endif + +} diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_analog/attiny85_i2c_analog.ino b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_analog/attiny85_i2c_analog.ino new file mode 100644 index 0000000..7190c93 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_analog/attiny85_i2c_analog.ino @@ -0,0 +1,210 @@ +/** + * Example sketch for writing to and reading from a slave in transactional manner + * + * NOTE: You must not use delay() or I2C communications will fail, use tws_delay() instead (or preferably some smarter timing system) + * + * On write the first byte received is considered the register addres to modify/read + * On each byte sent or read the register address is incremented (and it will loop back to 0) + * + * You can try this with the Arduino I2C REPL sketch at https://github.com/rambo/I2C/blob/master/examples/i2crepl/i2crepl.ino + * If you have bus-pirate remember that the older revisions do not like the slave streching the clock, this leads to all sorts of weird behaviour + * Examples use bus-pirate semantics (like the REPL) + * + * The basic idea is: + * 1. Choose your ADC channel (0-X), use "byte ch = 1;" for example. + * 2. Combine the channel and conversion start flag to single calue: byte start_on_ch = (ch | _BV(7)); // This is 0x81 + * 3. Write start_on_ch to the first register on the attiny [ 8 0 81 ] + * 4. Come back later and check the first register [ 8 0 [ r ], if the value is same as ch then the conversion is complete, you can now read the value + * 5. read the value [ 8 2 [ r r ] (first one is low, second high byte) + * + * You need to have at least 8MHz clock on the ATTiny for this to work (and in fact I have so far tested it only on ATTiny85 @8MHz using internal oscillator) + * Remember to "Burn bootloader" to make sure your chip is in correct mode + */ + + +/** + * Pin notes by Suovula, see also http://hlt.media.mit.edu/?p=1229 + * + * DIP and SOIC have same pinout, however the SOIC chips are much cheaper, especially if you buy more than 5 at a time + * For nice breakout boards see https://github.com/rambo/attiny_boards + * + * Basically the arduino pin numbers map directly to the PORTB bit numbers. + * +// I2C +arduino pin 0 = not(OC1A) = PORTB <- _BV(0) = SOIC pin 5 (I2C SDA, PWM) +arduino pin 2 = = PORTB <- _BV(2) = SOIC pin 7 (I2C SCL, Analog 1) +// Timer1 -> PWM +arduino pin 1 = OC1A = PORTB <- _BV(1) = SOIC pin 6 (PWM) +arduino pin 3 = not(OC1B) = PORTB <- _BV(3) = SOIC pin 2 (Analog 3) +arduino pin 4 = OC1B = PORTB <- _BV(4) = SOIC pin 3 (Analog 2) + */ +#define I2C_SLAVE_ADDRESS 0x4 // the 7-bit address (remember to change this when adapting this example) +// Get this from https://github.com/rambo/TinyWire +#include <TinyWireS.h> +// The default buffer size, though we cannot actually affect it by defining it in the sketch +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif +// For the ADC_xxx helpers +#include <core_adc.h> + +// The "registers" we expose to I2C +volatile uint8_t i2c_regs[] = +{ + 0x0, // Status register, writing (1<<7 & channel) will start a conversion on that channel, the flag will be set low when conversion is done. + 0x1, // Averaging count, make this many conversions in row and average the result (well, actually it's a rolling average since we do not want to have the possibility of integer overflows) + 0x0, // low byte + 0x0, // high byte +}; +const byte reg_size = sizeof(i2c_regs); +// Tracks the current register pointer position +volatile byte reg_position; +// Tracks wheter to start a conversion cycle +volatile boolean start_conversion; +// Counter to track where we are averaging +byte avg_count; +// Some temp value holders +int avg_temp1; +int avg_temp2; + +/** + * This is called for each read request we receive, never put more than one byte of data (with TinyWireS.send) to the + * send-buffer when using this callback + */ +void requestEvent() +{ + TinyWireS.send(i2c_regs[reg_position]); + // Increment the reg position on each read, and loop back to zero + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } +} + +/** + * The I2C data received -handler + * + * This needs to complete before the next incoming transaction (start, data, restart/stop) on the bus does + * so be quick, set flags for long running tasks to be called from the mainloop instead of running them directly, + */ +void receiveEvent(uint8_t howMany) +{ + if (howMany < 1) + { + // Sanity-check + return; + } + if (howMany > TWI_RX_BUFFER_SIZE) + { + // Also insane number + return; + } + + reg_position = TinyWireS.receive(); + howMany--; + if (!howMany) + { + // This write was only to set the buffer for next read + return; + } + while(howMany--) + { + i2c_regs[reg_position] = TinyWireS.receive(); + if ( reg_position == 0 // If it was the first register + && bitRead(i2c_regs[0], 7) // And the highest bit is set + && !ADC_ConversionInProgress() // and we do not actually have a conversion running already + ) + { + start_conversion = true; + } + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } + } +} + + +void setup() +{ + // TODO: Tri-state this and wait for input voltage to stabilize + pinMode(3, OUTPUT); // OC1B-, Arduino pin 3, ADC + digitalWrite(3, LOW); // Note that this makes the led turn on, it's wire this way to allow for the voltage sensing above. + + pinMode(1, OUTPUT); // OC1A, also The only HW-PWM -pin supported by the tiny core analogWrite + + /** + * Reminder: taking care of pull-ups is the masters job + */ + + TinyWireS.begin(I2C_SLAVE_ADDRESS); + TinyWireS.onReceive(receiveEvent); + TinyWireS.onRequest(requestEvent); + + + // Whatever other setup routines ? + + digitalWrite(3, HIGH); +} + +void loop() +{ + /** + * This is the only way we can detect stop condition (http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=984716&sid=82e9dc7299a8243b86cf7969dd41b5b5#984716) + * it needs to be called in a very tight loop in order not to miss any (REMINDER: Do *not* use delay() anywhere, use tws_delay() instead). + * It will call the function registered via TinyWireS.onReceive(); if there is data in the buffer on stop. + */ + TinyWireS_stop_check(); + + // Thus stuff is basically copied from wiring_analog.c + if (start_conversion) + { + //Avoid doubled starts + start_conversion = false; + byte adcpin = (i2c_regs[0] & 0x7f); // Set the channel from the control reg, dropping the highest bit. +#if defined( CORE_ANALOG_FIRST ) + if ( adcpin >= CORE_ANALOG_FIRST ) adcpin -= CORE_ANALOG_FIRST; // allow for channel or pin numbers +#endif + // NOTE: These handy helpers (ADC_xxx) are only present in the tiny-core, for other cores you need to check their wiring_analog.c source. + ADC_SetInputChannel( (adc_ic_t)adcpin ); // we need to typecast + ADC_StartConversion(); + // Reset these variables + avg_count = 0; + avg_temp2 = 0; + } + + if ( bitRead(i2c_regs[0], 7) // We have conversion flag up + && !ADC_ConversionInProgress()) // But the conversion is complete + { + // So handle it + avg_temp1 = ADC_GetDataRegister(); + // Rolling average + if (avg_count) + { + avg_temp2 = (avg_temp2+avg_temp1)/2; + } + else + { + avg_temp2 = avg_temp1; + } + avg_count++; + if (avg_count >= i2c_regs[1]) + { + // All done, set the bytes to registers + cli(); + i2c_regs[2] = lowByte(avg_temp2); + i2c_regs[3] = highByte(avg_temp2); + sei(); + // And clear the conversion flag so the master knows we're ready + bitClear(i2c_regs[0], 7); + } + else + { + // Re-trigger conversion + ADC_StartConversion(); + } + } + +} diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_slave/attiny85_i2c_slave.ino b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_slave/attiny85_i2c_slave.ino new file mode 100644 index 0000000..df2532f --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_slave/attiny85_i2c_slave.ino @@ -0,0 +1,152 @@ +/** + * Example sketch for writing to and reading from a slave in transactional manner + * + * NOTE: You must not use delay() or I2C communications will fail, use tws_delay() instead (or preferably some smarter timing system) + * + * On write the first byte received is considered the register addres to modify/read + * On each byte sent or read the register address is incremented (and it will loop back to 0) + * + * You can try this with the Arduino I2C REPL sketch at https://github.com/rambo/I2C/blob/master/examples/i2crepl/i2crepl.ino + * If you have bus-pirate remember that the older revisions do not like the slave streching the clock, this leads to all sorts of weird behaviour + * + * To read third value (register number 2 since counting starts at 0) send "[ 8 2 [ 9 r ]", value read should be 0xBE + * If you then send "[ 9 r r r ]" you should get 0xEF 0xDE 0xAD as response (demonstrating the register counter looping back to zero) + * + * You need to have at least 8MHz clock on the ATTiny for this to work (and in fact I have so far tested it only on ATTiny85 @8MHz using internal oscillator) + * Remember to "Burn bootloader" to make sure your chip is in correct mode + */ + + +/** + * Pin notes by Suovula, see also http://hlt.media.mit.edu/?p=1229 + * + * DIP and SOIC have same pinout, however the SOIC chips are much cheaper, especially if you buy more than 5 at a time + * For nice breakout boards see https://github.com/rambo/attiny_boards + * + * Basically the arduino pin numbers map directly to the PORTB bit numbers. + * +// I2C +arduino pin 0 = not(OC1A) = PORTB <- _BV(0) = SOIC pin 5 (I2C SDA, PWM) +arduino pin 2 = = PORTB <- _BV(2) = SOIC pin 7 (I2C SCL, Analog 1) +// Timer1 -> PWM +arduino pin 1 = OC1A = PORTB <- _BV(1) = SOIC pin 6 (PWM) +arduino pin 3 = not(OC1B) = PORTB <- _BV(3) = SOIC pin 2 (Analog 3) +arduino pin 4 = OC1B = PORTB <- _BV(4) = SOIC pin 3 (Analog 2) + */ +#define I2C_SLAVE_ADDRESS 0x4 // the 7-bit address (remember to change this when adapting this example) +// Get this from https://github.com/rambo/TinyWire +#include <TinyWireS.h> +// The default buffer size, Can't recall the scope of defines right now +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif + + +volatile uint8_t i2c_regs[] = +{ + 0xDE, + 0xAD, + 0xBE, + 0xEF, +}; +// Tracks the current register pointer position +volatile byte reg_position; +const byte reg_size = sizeof(i2c_regs); + +/** + * This is called for each read request we receive, never put more than one byte of data (with TinyWireS.send) to the + * send-buffer when using this callback + */ +void requestEvent() +{ + TinyWireS.send(i2c_regs[reg_position]); + // Increment the reg position on each read, and loop back to zero + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } +} + +// TODO: Either update this to use something smarter for timing or remove it alltogether +void blinkn(uint8_t blinks) +{ + digitalWrite(3, HIGH); + while(blinks--) + { + digitalWrite(3, LOW); + tws_delay(50); + digitalWrite(3, HIGH); + tws_delay(100); + } +} + +/** + * The I2C data received -handler + * + * This needs to complete before the next incoming transaction (start, data, restart/stop) on the bus does + * so be quick, set flags for long running tasks to be called from the mainloop instead of running them directly, + */ +void receiveEvent(uint8_t howMany) +{ + if (howMany < 1) + { + // Sanity-check + return; + } + if (howMany > TWI_RX_BUFFER_SIZE) + { + // Also insane number + return; + } + + reg_position = TinyWireS.receive(); + howMany--; + if (!howMany) + { + // This write was only to set the buffer for next read + return; + } + while(howMany--) + { + i2c_regs[reg_position] = TinyWireS.receive(); + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } + } +} + + +void setup() +{ + // TODO: Tri-state this and wait for input voltage to stabilize + pinMode(3, OUTPUT); // OC1B-, Arduino pin 3, ADC + digitalWrite(3, LOW); // Note that this makes the led turn on, it's wire this way to allow for the voltage sensing above. + + pinMode(1, OUTPUT); // OC1A, also The only HW-PWM -pin supported by the tiny core analogWrite + + /** + * Reminder: taking care of pull-ups is the masters job + */ + + TinyWireS.begin(I2C_SLAVE_ADDRESS); + TinyWireS.onReceive(receiveEvent); + TinyWireS.onRequest(requestEvent); + + + // Whatever other setup routines ? + + digitalWrite(3, HIGH); +} + +void loop() +{ + /** + * This is the only way we can detect stop condition (http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=984716&sid=82e9dc7299a8243b86cf7969dd41b5b5#984716) + * it needs to be called in a very tight loop in order not to miss any (REMINDER: Do *not* use delay() anywhere, use tws_delay() instead). + * It will call the function registered via TinyWireS.onReceive(); if there is data in the buffer on stop. + */ + TinyWireS_stop_check(); +} diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_slave_task/attiny85_i2c_slave_task.ino b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_slave_task/attiny85_i2c_slave_task.ino new file mode 100644 index 0000000..4b3f269 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/examples/attiny85_i2c_slave_task/attiny85_i2c_slave_task.ino @@ -0,0 +1,246 @@ +/** + * Example sketch for writing to and reading from a slave in transactional manner, it will also blink a led attached to pin 3 (which is the SOIC pin 2) + * (provided you're using one of my ATTiny85 boards from https://github.com/rambo/attiny_boards with the led soldered) + * + * NOTE: You must not use delay() or I2C communications will fail, use tws_delay() instead (or preferably some smarter timing system, like the Task library used in this example) + * + * On write the first byte received is considered the register addres to modify/read + * On each byte sent or read the register address is incremented (and it will loop back to 0) + * + * You can try this with the Arduino I2C REPL sketch at https://github.com/rambo/I2C/blob/master/examples/i2crepl/i2crepl.ino + * If you have bus-pirate remember that the older revisions do not like the slave streching the clock, this leads to all sorts of weird behaviour + * + * By default this blinks the SOS morse pattern and then has long on/off time to indicate end of pattern, send [ 8 0 32 ] (using the REPL/bus-pirate + * semantics) to make the delay per bit smaller (and thus blinking faster). The pattern lenght is calculated from the register size, it would be fairly + * trivial to make it yet another variable changeable via I2C. + * + * You need to have at least 8MHz clock on the ATTiny for this to work (and in fact I have so far tested it only on ATTiny85 @8MHz using internal oscillator) + * Remember to "Burn bootloader" to make sure your chip is in correct mode + */ + + +/** + * Pin notes by Suovula, see also http://hlt.media.mit.edu/?p=1229 + * + * DIP and SOIC have same pinout, however the SOIC chips are much cheaper, especially if you buy more than 5 at a time + * For nice breakout boards see https://github.com/rambo/attiny_boards + * + * Basically the arduino pin numbers map directly to the PORTB bit numbers. + * +// I2C +arduino pin 0 = not(OC1A) = PORTB <- _BV(0) = SOIC pin 5 (I2C SDA, PWM) +arduino pin 2 = = PORTB <- _BV(2) = SOIC pin 7 (I2C SCL, Analog 1) +// Timer1 -> PWM +arduino pin 1 = OC1A = PORTB <- _BV(1) = SOIC pin 6 (PWM) +arduino pin 3 = not(OC1B) = PORTB <- _BV(3) = SOIC pin 2 (Analog 3) +arduino pin 4 = OC1B = PORTB <- _BV(4) = SOIC pin 3 (Analog 2) + */ +#define I2C_SLAVE_ADDRESS 0x4 // the 7-bit address (remember to change this when adapting this example) +// Get this from https://github.com/rambo/TinyWire +#include <TinyWireS.h> +// The default buffer size, Can't recall the scope of defines right now +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif +// Get this library from http://bleaklow.com/files/2010/Task.tar.gz +// and read http://bleaklow.com/2010/07/20/a_very_simple_arduino_task_manager.html for background and instructions +#include <Task.h> +#include <TaskScheduler.h> + +// The led is connected so that the tiny sinks current +#define LED_ON LOW +#define LED_OFF HIGH + +// The I2C registers +volatile uint8_t i2c_regs[] = +{ + 150, // Delay between each position (ms, remeber that this isa byte so 255 is max) + B10101000, // SOS pattern + B01110111, + B01110001, + B01010000, + B00000000, + B11111111, // Long on and off to mark end of pattern + B00000000, +}; +// Tracks the current register pointer position +volatile byte reg_position; +const byte reg_size = sizeof(i2c_regs); + + +/** + * BEGIN: PatternBlinker task based on the Task library Blinker example + */ +// Timed task to blink a LED. +const byte pattern_lenght = (sizeof(i2c_regs)-1) * 8; // bits (first is the speed, rest is the pattern) +class PatternBlinker : public TimedTask +{ +public: + // Create a new blinker for the specified pin and rate. + PatternBlinker(uint8_t _pin); + virtual void run(uint32_t now); +private: + uint8_t pin; // LED pin. + uint8_t pattern_position; // Used to calcuate the register and bit offset +}; + +PatternBlinker::PatternBlinker(uint8_t _pin) +: TimedTask(millis()), + pin(_pin) +{ + pinMode(pin, OUTPUT); // Set pin for output. +} + +void PatternBlinker::run(uint32_t now) +{ + // Start by setting the next runtime + incRunTime(i2c_regs[0]); + + // Written out for clear code, the complier might optimize it to something more efficient even without it being unrolled into one line + byte reg = i2c_regs[1+(pattern_position/8)]; // Get the register where the bit pattern position is stored + byte shift_amount = 7 - (pattern_position % 7); // To have "natural" left-to-right pattern flow. + bool state = (reg >> shift_amount) & 0x1; + if (state) { + digitalWrite(pin, LED_ON); + } else { + digitalWrite(pin, LED_OFF); + } + // Calculate the next pattern position + pattern_position = (pattern_position+1) % pattern_lenght; +} +/** + * END: PatternBlinker task copied from the Task library example + */ +/** + * BEGIN: I2C Stop flag checker + * + * This task needs to run almost all the time due to the USI I2C implementation limitations + * + * So I2CStopCheck_YIELD_TICKS below is used to specify how often the task is run, not it's every 4 ticks + */ +#define I2CStopCheck_YIELD_TICKS 4 +class I2CStopCheck : public Task +{ +public: + I2CStopCheck(); + virtual void run(uint32_t now); + virtual bool canRun(uint32_t now); +private: + uint8_t yield_counter; // Incremented on each canRun call, used to yield to other tasks. +}; + +I2CStopCheck::I2CStopCheck() +: Task() +{ +} + +// We can't just return true since then no other task could ever run (since we have the priority) +bool I2CStopCheck::canRun(uint32_t now) +{ + yield_counter++; + bool ret = false; + if (yield_counter == I2CStopCheck_YIELD_TICKS) + { + ret = true; + yield_counter = 0; + } + return ret; +} + +void I2CStopCheck::run(uint32_t now) +{ + TinyWireS_stop_check(); +} +/** + * END: I2C Stop flag checker + */ + +// Create the tasks. +PatternBlinker blinker(3); +I2CStopCheck checker; + +// Tasks are in priority order, only one task is run per tick +Task *tasks[] = { &checker, &blinker, }; +TaskScheduler sched(tasks, NUM_TASKS(tasks)); + + +/** + * This is called for each read request we receive, never put more than one byte of data (with TinyWireS.send) to the + * send-buffer when using this callback + */ +void requestEvent() +{ + TinyWireS.send(i2c_regs[reg_position]); + // Increment the reg position on each read, and loop back to zero + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } +} + +/** + * The I2C data received -handler + * + * This needs to complete before the next incoming transaction (start, data, restart/stop) on the bus does + * so be quick, set flags for long running tasks to be called from the mainloop instead of running them directly, + */ +void receiveEvent(uint8_t howMany) +{ + if (howMany < 1) + { + // Sanity-check + return; + } + if (howMany > TWI_RX_BUFFER_SIZE) + { + // Also insane number + return; + } + + reg_position = TinyWireS.receive(); + howMany--; + if (!howMany) + { + // This write was only to set the buffer for next read + return; + } + while(howMany--) + { + i2c_regs[reg_position] = TinyWireS.receive(); + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } + } +} + + +void setup() +{ + // TODO: Tri-state this and wait for input voltage to stabilize + pinMode(3, OUTPUT); // OC1B-, Arduino pin 3, ADC + digitalWrite(3, LED_ON); // Note that this makes the led turn on, it's wire this way to allow for the voltage sensing above. + + pinMode(1, OUTPUT); // OC1A, also The only HW-PWM -pin supported by the tiny core analogWrite + + /** + * Reminder: taking care of pull-ups is the masters job + */ + + TinyWireS.begin(I2C_SLAVE_ADDRESS); + TinyWireS.onReceive(receiveEvent); + TinyWireS.onRequest(requestEvent); + + + // Whatever other setup routines ? + + digitalWrite(3, LED_OFF); +} + +void loop() +{ + // Run the scheduler - never returns. + sched.run(); +} diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/keywords.txt b/digital-driver/firmware/TinyWire-master/TinyWireS/keywords.txt new file mode 100644 index 0000000..ccc0b46 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/keywords.txt @@ -0,0 +1,27 @@ +#######################################
+# Syntax Coloring Map For TinyWireS
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+begin KEYWORD2
+send KEYWORD2
+available KEYWORD2
+receive KEYWORD2
+
+#######################################
+# Instances (KEYWORD2)
+#######################################
+
+TinyWireS KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+
diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/usiTwiSlave.c b/digital-driver/firmware/TinyWire-master/TinyWireS/usiTwiSlave.c new file mode 100644 index 0000000..a263184 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/usiTwiSlave.c @@ -0,0 +1,748 @@ +/******************************************************************************** + +USI TWI Slave driver. + +Created by Donald R. Blake. donblake at worldnet.att.net +Adapted by Jochen Toppe, jochen.toppe at jtoee.com + +--------------------------------------------------------------------------------- + +Created from Atmel source files for Application Note AVR312: Using the USI Module +as an I2C slave. + +This program is free software; you can redistribute it and/or modify it under the +terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A +PARTICULAR PURPOSE. See the GNU General Public License for more details. + +--------------------------------------------------------------------------------- + +Change Activity: + + Date Description + ------ ------------- + 16 Mar 2007 Created. + 27 Mar 2007 Added support for ATtiny261, 461 and 861. + 26 Apr 2007 Fixed ACK of slave address on a read. + 04 Jul 2007 Fixed USISIF in ATtiny45 def + 12 Dev 2009 Added callback functions for data requests + 06 Feb 2016 Minor change to allow mutli-byte requestFrom() from master. + 10 Feb 2016 Simplied RX/TX buffer code and allowed use of full buffer. + 13 Feb 2016 Made USI_RECEIVE_CALLBACK() callback fully interrupt-driven + 12 Dec 2016 Added support for ATtiny167 + 23 Dec 2017 Fixed repeated restart (which broke when making receive callback + interrupt-driven) + +********************************************************************************/ + + +/******************************************************************************** + includes +********************************************************************************/ + +#include <avr/io.h> +#include <avr/interrupt.h> + +#include "usiTwiSlave.h" +//#include "../common/util.h" + + +/******************************************************************************** + device dependent defines +********************************************************************************/ + +#if defined( __AVR_ATtiny167__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +#if defined( __AVR_ATtiny2313__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB5 +# define PORT_USI_SCL PB7 +# define PIN_USI_SDA PINB5 +# define PIN_USI_SCL PINB7 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +#if defined(__AVR_ATtiny84__) | \ + defined(__AVR_ATtiny44__) +# define DDR_USI DDRA +# define PORT_USI PORTA +# define PIN_USI PINA +# define PORT_USI_SDA PORTA6 +# define PORT_USI_SCL PORTA4 +# define PIN_USI_SDA PINA6 +# define PIN_USI_SCL PINA4 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATtiny25__ ) | \ + defined( __AVR_ATtiny45__ ) | \ + defined( __AVR_ATtiny85__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATtiny26__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_STRT_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATtiny261__ ) | \ + defined( __AVR_ATtiny461__ ) | \ + defined( __AVR_ATtiny861__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATmega165__ ) | \ + defined( __AVR_ATmega325__ ) | \ + defined( __AVR_ATmega3250__ ) | \ + defined( __AVR_ATmega645__ ) | \ + defined( __AVR_ATmega6450__ ) | \ + defined( __AVR_ATmega329__ ) | \ + defined( __AVR_ATmega3290__ ) +# define DDR_USI DDRE +# define PORT_USI PORTE +# define PIN_USI PINE +# define PORT_USI_SDA PE5 +# define PORT_USI_SCL PE4 +# define PIN_USI_SDA PINE5 +# define PIN_USI_SCL PINE4 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +#if defined( __AVR_ATmega169__ ) +# define DDR_USI DDRE +# define PORT_USI PORTE +# define PIN_USI PINE +# define PORT_USI_SDA PE5 +# define PORT_USI_SCL PE4 +# define PIN_USI_SDA PINE5 +# define PIN_USI_SCL PINE4 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +// These macros make the stop condition detection code more readable. +#define USI_PINS_SCL_SDA ( ( 1 << PIN_USI_SDA ) | ( 1 << PIN_USI_SCL ) ) +#define USI_PINS_SDA ( 1 << PIN_USI_SDA ) +#define USI_PINS_SCL ( 1 << PIN_USI_SCL ) + +/******************************************************************************** + + functions implemented as macros + +********************************************************************************/ + +#define SET_USI_TO_SEND_ACK( ) \ +{ \ + /* prepare ACK, ack is a zero */ \ + USIDR = 0; \ + /* set SDA as output */ \ + DDR_USI |= ( 1 << PORT_USI_SDA ); \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | \ + ( 1 << USIOIF ) | ( 1 << USIPF ) | \ + ( 1 << USIDC )| \ + /* set USI counter to shift 1 bit */ \ + ( 0x0E << USICNT0 ); \ +} + +#define SET_USI_TO_READ_ACK( ) \ +{ \ + /* set SDA as input */ \ + DDR_USI &= ~( 1 << PORT_USI_SDA ); \ + /* prepare ACK */ \ + USIDR = 0; \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | \ + ( 1 << USIOIF ) | \ + ( 1 << USIPF ) | \ + ( 1 << USIDC ) | \ + /* set USI counter to shift 1 bit */ \ + ( 0x0E << USICNT0 ); \ +} + +#define SET_USI_TO_TWI_START_CONDITION_MODE( ) \ +{ \ + USICR = \ + /* enable Start Condition Interrupt, disable Overflow Interrupt */ \ + ( 1 << USISIE ) | ( 0 << USIOIE ) | \ + /* set USI in Two-wire mode, no USI Counter overflow hold */ \ + ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | \ + /* Shift Register Clock Source = External, positive edge */ \ + /* 4-Bit Counter Source = external, both edges */ \ + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | \ + /* no toggle clock-port pin */ \ + ( 0 << USITC ); \ + USISR = \ + /* clear all interrupt flags, except Start Cond */ \ + ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | \ + ( 1 << USIDC ) | ( 0x0 << USICNT0 ); \ +} + +#define SET_USI_TO_SEND_DATA( ) \ +{ \ + /* set SDA as output */ \ + DDR_USI |= ( 1 << PORT_USI_SDA ); \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | \ + ( 1 << USIDC) | \ + /* set USI to shift out 8 bits */ \ + ( 0x0 << USICNT0 ); \ +} + +#define SET_USI_TO_READ_DATA( ) \ +{ \ + /* set SDA as input */ \ + DDR_USI &= ~( 1 << PORT_USI_SDA ); \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | \ + ( 1 << USIPF ) | ( 1 << USIDC ) | \ + /* set USI to shift out 8 bits */ \ + ( 0x0 << USICNT0 ); \ +} + +#define USI_RECEIVE_CALLBACK() \ +{ \ + if (usi_onReceiverPtr) \ + { \ + if (usiTwiAmountDataInReceiveBuffer()) \ + { \ + usi_onReceiverPtr(usiTwiAmountDataInReceiveBuffer()); \ + } \ + } \ +} + +#define USI_REQUEST_CALLBACK() \ +{ \ + if(usi_onRequestPtr) usi_onRequestPtr(); \ +} + +/******************************************************************************** + + typedef's + +********************************************************************************/ + +typedef enum +{ + USI_SLAVE_CHECK_ADDRESS = 0x00, + USI_SLAVE_SEND_DATA = 0x01, + USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA = 0x02, + USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA = 0x03, + USI_SLAVE_REQUEST_DATA = 0x04, + USI_SLAVE_GET_DATA_AND_SEND_ACK = 0x05 +} overflowState_t; + + + +/******************************************************************************** + + local variables + +********************************************************************************/ + +static uint8_t slaveAddress; +static uint8_t sleep_enable_bit; +static uint8_t in_transaction; +static volatile overflowState_t overflowState; + + +static uint8_t rxBuf[ TWI_RX_BUFFER_SIZE ]; +static volatile uint8_t rxHead; +static volatile uint8_t rxTail; +static volatile uint8_t rxCount; + +static uint8_t txBuf[ TWI_TX_BUFFER_SIZE ]; +static volatile uint8_t txHead; +static volatile uint8_t txTail; +static volatile uint8_t txCount; + + + +/******************************************************************************** + + local functions + +********************************************************************************/ + +// flushes the TWI buffers + +static void flushTwiBuffers( void ) +{ + rxTail = 0; + rxHead = 0; + rxCount = 0; + txTail = 0; + txHead = 0; + txCount = 0; +} // end flushTwiBuffers + + + +/******************************************************************************** + + public functions + +********************************************************************************/ + +// initialise USI for TWI slave mode + +void usiTwiSlaveInit( uint8_t ownAddress ) +{ + // initialize the TX and RX buffers to empty + flushTwiBuffers( ); + + slaveAddress = ownAddress; + + // In Two Wire mode (USIWM1, USIWM0 = 1X), the slave USI will pull SCL + // low when a start condition is detected or a counter overflow (only + // for USIWM1, USIWM0 = 11). This inserts a wait state. SCL is released + // by the ISRs (USI_START_vect and USI_OVERFLOW_vect). + + // Set SCL and SDA as output + DDR_USI |= ( 1 << PORT_USI_SCL ) | ( 1 << PORT_USI_SDA ); + + // set SCL high + PORT_USI |= ( 1 << PORT_USI_SCL ); + + // set SDA high + PORT_USI |= ( 1 << PORT_USI_SDA ); + + // Set SDA as input + DDR_USI &= ~( 1 << PORT_USI_SDA ); + + USICR = + // enable Start Condition Interrupt + ( 1 << USISIE ) | + // disable Overflow Interrupt + ( 0 << USIOIE ) | + // set USI in Two-wire mode, no USI Counter overflow hold + ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | + // Shift Register Clock Source = external, positive edge + // 4-Bit Counter Source = external, both edges + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | + // no toggle clock-port pin + ( 0 << USITC ); + + // clear all interrupt flags and reset overflow counter + + USISR = ( 1 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | ( 1 << USIDC ); + + // The 'in_transaction' variable remembers if the usiTwiSlave driver is in the middle of + // an i2c transaction. Initialize it to zero + in_transaction = 0; + +} // end usiTwiSlaveInit + + +bool usiTwiDataInTransmitBuffer(void) +{ + + // return 0 (false) if the receive buffer is empty + return txCount; + +} // end usiTwiDataInTransmitBuffer + + +// put data in the transmission buffer, wait if buffer is full + +void usiTwiTransmitByte( uint8_t data ) +{ + + // wait for free space in buffer + while ( txCount == TWI_TX_BUFFER_SIZE) ; + + // store data in buffer + txBuf[ txHead ] = data; + txHead = ( txHead + 1 ) & TWI_TX_BUFFER_MASK; + txCount++; + +} // end usiTwiTransmitByte + + +// return a byte from the receive buffer, wait if buffer is empty + +uint8_t usiTwiReceiveByte( void ) +{ + uint8_t rtn_byte; + + // wait for Rx data + while ( !rxCount ); + + rtn_byte = rxBuf [ rxTail ]; + // calculate buffer index + rxTail = ( rxTail + 1 ) & TWI_RX_BUFFER_MASK; + rxCount--; + + // return data from the buffer. + return rtn_byte; + +} // end usiTwiReceiveByte + + +uint8_t usiTwiAmountDataInReceiveBuffer(void) +{ + return rxCount; +} + + +/******************************************************************************** + + USI Start Condition ISR + +********************************************************************************/ + +ISR( USI_START_VECTOR ) +{ + uint8_t usi_pins; + // http://www.atmel.com/webdoc/AVRLibcReferenceManual/group__avr__interrupts.html + + // Notes about ISR. The compiler in the Arduino IDE handles some of the + // basic ISR plumbing (unless the "ISR_NAKED" attribute is applied). + // * The AVR processor resets the SREG.I bit when jumping into an ISR + // * The compiler automatically adds code to save SREG + // * < user's ISR code goes here > + // * The compiler automatically adds code to restore SREG + // * The compiler automatically uses the RETI instruction to return from the ISR. + // The RETI instruction enables interrupts after the return from ISR. + // The compiler behavior can be altered with attributes into the ISR declaration; + // however, the description above is the default. + + // cli() call is not necessary. Processor disables interrupts when + // jumping to an ISR + + // no need to save the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + if ( !in_transaction ) + { + // remeber the sleep enable bit when entering the ISR + sleep_enable_bit = MCUCR & ( 1 << SE ); + + // clear the sleep enable bit to prevent the CPU from entering sleep mode while executing this ISR. + MCUCR &= ~( 1 << SE ); + } + + // set default starting conditions for new TWI package + overflowState = USI_SLAVE_CHECK_ADDRESS; + + // set SDA as input + DDR_USI &= ~( 1 << PORT_USI_SDA ); + + // the start condition is that the master pulls SDA low. + + // wait for SCL to go low to ensure the Start Condition has completed (the + // start detector will hold SCL low ) - if a Stop Condition arises then leave + // the interrupt to prevent waiting forever - don't use USISR to test for Stop + // Condition as in Application Note AVR312 because the Stop Condition Flag is + // going to be set from the last TWI sequence + + // while SCL is high and SDA is low + while ( ( usi_pins = PIN_USI & USI_PINS_SCL_SDA ) == USI_PINS_SCL ); + + // if SDA line was low at SCL edge, then start condition occurred + if ( !( usi_pins & USI_PINS_SDA ) ) + { + // a Stop Condition did not occur + + // Execute callback if this is a repeated start + if (in_transaction) + { + USI_RECEIVE_CALLBACK(); + } + + USICR = + // keep Start Condition Interrupt enabled to detect RESTART + ( 1 << USISIE ) | + // enable Overflow Interrupt + ( 1 << USIOIE ) | + // set USI in Two-wire mode, hold SCL low on USI Counter overflow + ( 1 << USIWM1 ) | ( 1 << USIWM0 ) | + // Shift Register Clock Source = External, positive edge + // 4-Bit Counter Source = external, both edges + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | + // no toggle clock-port pin + ( 0 << USITC ); + + //remember that the USI is in a valid i2c transaction + in_transaction = 1; + + } + else + { + // a Stop Condition did occur + + USICR = + // enable Start Condition Interrupt + ( 1 << USISIE ) | + // disable Overflow Interrupt + ( 0 << USIOIE ) | + // set USI in Two-wire mode, no USI Counter overflow hold + ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | + // Shift Register Clock Source = external, positive edge + // 4-Bit Counter Source = external, both edges + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | + // no toggle clock-port pin + ( 0 << USITC ); + + //no longer in valid i2c transaction + in_transaction = 0; + // restore the sleep enable bit + MCUCR |= sleep_enable_bit; + + } // end if + + USISR = + // clear interrupt flags - resetting the Start Condition Flag will + // release SCL + ( 1 << USI_START_COND_INT ) | ( 1 << USIOIF ) | + ( 1 << USIPF ) |( 1 << USIDC ) | + // set USI to sample 8 bits (count 16 external SCL pin toggles) + ( 0x0 << USICNT0); + + // no need to restore the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + // The compiler automatically uses an RETI instruction to return when using the + // ISR construct without modifying attributes. + +} // end ISR( USI_START_VECTOR ) + + + +/******************************************************************************** + + USI Overflow ISR + +Handles all the communication. + +Only disabled when waiting for a new Start Condition. + +********************************************************************************/ + +ISR( USI_OVERFLOW_VECTOR ) +{ + uint8_t finished; + uint8_t usi_pins; + + // http://www.atmel.com/webdoc/AVRLibcReferenceManual/group__avr__interrupts.html + + // Notes about ISR. The compiler in the Arduino IDE handles some of the + // basic ISR plumbing. + // * The AVR processor resets the SREG.I bit when jumping into an ISR + // * The compiler automatically adds code to save the SREG + // * < user's ISR code goes here > + // * The compiler automatically adds code to restore the SREG + // * The compiler automatically uses the RETI instruction to return from the ISR. + // The RETI insturction enables interrupts after the return from ISR. + // The compiler behavior can be altered with attributes into the ISR declaration; + // however, the description above is the default. + + // cli() call is not necessary. Processor disables interrupts when + // jumping to an ISR + + // no need to save the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + // The ISR is only ever entered because the ISR(USI_START_VECTOR) interrupt + // routine ran first. That routine saved the sleep mode and disabled sleep. + + // Most of the time this routine exits, it has setup the USI to shift in/out bits + // and is expected to re-entered because of the USI overflow interrupt. Track whether or + // not the transaction is completely finished. + finished = 0; + + + switch ( overflowState ) + { + + // Address mode: check address and send ACK (and next USI_SLAVE_SEND_DATA) if OK, + // else reset USI + case USI_SLAVE_CHECK_ADDRESS: + if ( ( USIDR == 0 ) || ( ( USIDR >> 1 ) == slaveAddress) ) + { + if ( USIDR & 0x01 ) + { + overflowState = USI_SLAVE_SEND_DATA; + } + else + { + overflowState = USI_SLAVE_REQUEST_DATA; + } // end if + + // ack the start frame + // sets up the USI to pull SDA low and clock one bit (two edges) + SET_USI_TO_SEND_ACK( ); + } + else + { + SET_USI_TO_TWI_START_CONDITION_MODE( ); + finished = 1; + } + break; + + // master-read / slave-send: check reply and goto USI_SLAVE_SEND_DATA if OK, + // else reset USI + case USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA: + // Execute request callback for each byte requested, as this is the intended + // behavior of this library + USI_REQUEST_CALLBACK(); + if ( USIDR ) + { + // if NACK, the master does not want more data + SET_USI_TO_TWI_START_CONDITION_MODE( ); + finished = 1; + break; + } + // from here we just drop straight into USI_SLAVE_SEND_DATA if the + // master sent an ACK + + // copy data from buffer to USIDR and set USI to shift byte + // next USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA + case USI_SLAVE_SEND_DATA: + // Get data from Buffer + if ( txCount ) + { + USIDR = txBuf[ txTail ]; + txTail = ( txTail + 1 ) & TWI_TX_BUFFER_MASK; + txCount--; + + overflowState = USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA; + SET_USI_TO_SEND_DATA( ); + } + else + { + // the buffer is empty + SET_USI_TO_READ_ACK( ); // This might be neccessary sometimes see http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=805227#805227 + SET_USI_TO_TWI_START_CONDITION_MODE( ); + } // end if + break; + + // set USI to sample reply from master + // next USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA + case USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA: + overflowState = USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA; + SET_USI_TO_READ_ACK( ); + break; + + // master-send / slave-receive: set USI to sample data from master, next + // USI_SLAVE_GET_DATA_AND_SEND_ACK + case USI_SLAVE_REQUEST_DATA: + overflowState = USI_SLAVE_GET_DATA_AND_SEND_ACK; + SET_USI_TO_READ_DATA( ); + + // with the SET_USI_TO_READ_DATA() macro call above, the USI has + // been setup to catch the next byte if the master sends one. + // while that's going on, look for a stop condition here which + // is when the SDA line goes high after the SCL line; + + // wait until SCL goes high + while ( ! ( ( usi_pins = PIN_USI & USI_PINS_SCL_SDA ) & USI_PINS_SCL ) ); + + // if SDA line was high at SCL edge, then not a stop condition + if ( usi_pins & USI_PINS_SDA ) + break; + + // wait until SCL goes low or SDA goes high + while ( ( usi_pins = PIN_USI & USI_PINS_SCL_SDA ) == USI_PINS_SCL ); + + // if both SCL and SDA are high, then stop condition occurred + if ( usi_pins == USI_PINS_SCL_SDA ) + { + USI_RECEIVE_CALLBACK(); + SET_USI_TO_TWI_START_CONDITION_MODE( ); + finished = 1; + } + + break; + + // copy data from USIDR and send ACK + // next USI_SLAVE_REQUEST_DATA + case USI_SLAVE_GET_DATA_AND_SEND_ACK: + // put data into buffer + // check buffer size + if ( rxCount < TWI_RX_BUFFER_SIZE ) + { + rxBuf[ rxHead ] = USIDR; + rxHead = ( rxHead + 1 ) & TWI_RX_BUFFER_MASK; + rxCount++; + } else { + // overrun + // drop data + } + // next USI_SLAVE_REQUEST_DATA + overflowState = USI_SLAVE_REQUEST_DATA; + SET_USI_TO_SEND_ACK( ); + break; + + } // end switch + + if (finished) + { + //no longer in valid i2c transaction + in_transaction = 0; + // restore the sleep enable bit + // note that this allows sleep -- it does not cause sleep + MCUCR |= sleep_enable_bit; + } + + // no need to restore the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + // The compiler automatically uses an RETI instruction to return when using the + // ISR construct without modifying attributes. + +} // end ISR( USI_OVERFLOW_VECTOR ) diff --git a/digital-driver/firmware/TinyWire-master/TinyWireS/usiTwiSlave.h b/digital-driver/firmware/TinyWire-master/TinyWireS/usiTwiSlave.h new file mode 100644 index 0000000..88b9445 --- /dev/null +++ b/digital-driver/firmware/TinyWire-master/TinyWireS/usiTwiSlave.h @@ -0,0 +1,96 @@ +/******************************************************************************** + +Header file for the USI TWI Slave driver. + +Created by Donald R. Blake +donblake at worldnet.att.net + +--------------------------------------------------------------------------------- + +Created from Atmel source files for Application Note AVR312: Using the USI Module +as an I2C slave. + +This program is free software; you can redistribute it and/or modify it under the +terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A +PARTICULAR PURPOSE. See the GNU General Public License for more details. + +--------------------------------------------------------------------------------- + +Change Activity: + + Date Description + ------ ------------- + 15 Mar 2007 Created. + +********************************************************************************/ + + + +#ifndef _USI_TWI_SLAVE_H_ +#define _USI_TWI_SLAVE_H_ + + + +/******************************************************************************** + + includes + +********************************************************************************/ + +#include <stdbool.h> +#include <avr/sleep.h> + + + +/******************************************************************************** + + prototypes + +********************************************************************************/ + +void usiTwiSlaveInit( uint8_t ); +void usiTwiTransmitByte( uint8_t ); +uint8_t usiTwiReceiveByte( void ); +bool usiTwiDataInTransmitBuffer(void); +uint8_t usiTwiAmountDataInReceiveBuffer(void); +// on_XXX handler pointers +void (*usi_onRequestPtr)(void); +void (*usi_onReceiverPtr)(uint8_t); + + +/******************************************************************************** + + driver buffer definitions + +********************************************************************************/ + +// permitted RX buffer sizes: 1, 2, 4, 8, 16, 32, 64, 128 or 256 + +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif +#define TWI_RX_BUFFER_MASK ( TWI_RX_BUFFER_SIZE - 1 ) + +#if ( TWI_RX_BUFFER_SIZE & TWI_RX_BUFFER_MASK ) +# error TWI RX buffer size is not a power of 2 +#endif + +// permitted TX buffer sizes: 1, 2, 4, 8, 16, 32, 64, 128 or 256 + +#ifndef TWI_TX_BUFFER_SIZE +#define TWI_TX_BUFFER_SIZE ( 16 ) +#endif +#define TWI_TX_BUFFER_MASK ( TWI_TX_BUFFER_SIZE - 1 ) + +#if ( TWI_TX_BUFFER_SIZE & TWI_TX_BUFFER_MASK ) +# error TWI TX buffer size is not a power of 2 +#endif + + + +#endif // ifndef _USI_TWI_SLAVE_H_ diff --git a/digital-driver/firmware/TinyWireS.zip b/digital-driver/firmware/TinyWireS.zip Binary files differnew file mode 100644 index 0000000..aa3958c --- /dev/null +++ b/digital-driver/firmware/TinyWireS.zip diff --git a/digital-driver/firmware/TinyWireS/TinyWireS.cpp b/digital-driver/firmware/TinyWireS/TinyWireS.cpp new file mode 100644 index 0000000..783e8e7 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/TinyWireS.cpp @@ -0,0 +1,91 @@ +/*
+ TinyWireS.cpp - a wrapper class for Don Blake's usiTwiSlave routines.
+ Provides TWI/I2C Slave functionality on ATtiny processers in Arduino environment.
+ 1/23/2011 BroHogan - brohoganx10 at gmail dot com
+
+ **** See TinyWireS.h for Credits and Usage information ****
+
+ This library is free software; you can redistribute it and/or modify it under the
+ terms of the GNU General Public License as published by the Free Software
+ Foundation; either version 2.1 of the License, or any later version.
+ This program is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ PARTICULAR PURPOSE. See the GNU General Public License for more details.
+*/
+
+extern "C" {
+ #include <inttypes.h>
+ #include "usiTwiSlave.h"
+ #include <avr/interrupt.h>
+ }
+
+#include "TinyWireS.h"
+#include "Arduino.h"
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+USI_TWI_S::USI_TWI_S(){
+}
+
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+void USI_TWI_S::begin(uint8_t slaveAddr){ // initialize I2C lib
+ usiTwiSlaveInit(slaveAddr);
+}
+
+void USI_TWI_S::send(uint8_t data){ // send it back to master
+ usiTwiTransmitByte(data);
+}
+
+uint8_t USI_TWI_S::available(){ // the bytes available that haven't been read yet
+ return usiTwiAmountDataInReceiveBuffer();
+ //return usiTwiDataInReceiveBuffer(); // This is wrong as far as the Wire API is concerned since it returns boolean and not amount
+}
+
+uint8_t USI_TWI_S::receive(){ // returns the bytes received one at a time
+ return usiTwiReceiveByte();
+}
+
+// sets function called on slave write
+void USI_TWI_S::onReceive( void (*function)(uint8_t) )
+{
+ usi_onReceiverPtr = function;
+}
+
+// sets function called on slave read
+void USI_TWI_S::onRequest( void (*function)(void) )
+{
+ usi_onRequestPtr = function;
+}
+
+// This routine is no longer used now that the usiTwiSlave is completely
+// interrupt driven. The function is maintained here so that programs
+// written for the pre-interrupt driven version will still compile and function.
+void TinyWireS_stop_check()
+{
+ // empty functions
+}
+
+// Implement a delay loop that checks for the stop bit (basically direct copy of the stock arduino implementation from wiring.c)
+// I don't think this function is necessary now that the
+// usiTwiSlave is completely interrupt driven. I'm not sure, and the function is
+// behaviorally harmless because TinyWireS_stop_check() is empty, so I'm leaving it alone.
+void tws_delay(unsigned long ms)
+{
+ uint16_t start = (uint16_t)micros();
+ while (ms > 0)
+ {
+ TinyWireS_stop_check();
+ if (((uint16_t)micros() - start) >= 1000)
+ {
+ ms--;
+ start += 1000;
+ }
+ }
+}
+
+// Preinstantiate Objects //////////////////////////////////////////////////////
+
+USI_TWI_S TinyWireS = USI_TWI_S();
+
diff --git a/digital-driver/firmware/TinyWireS/TinyWireS.h b/digital-driver/firmware/TinyWireS/TinyWireS.h new file mode 100644 index 0000000..ccef042 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/TinyWireS.h @@ -0,0 +1,64 @@ +/*
+ TinyWireS.h - a wrapper class for Don Blake's usiTwiSlave routines.
+ Provides TWI/I2C Slave functionality on ATtiny processers in Arduino environment.
+ 1/23/2011 BroHogan - brohoganx10 at gmail dot com
+
+ Major credit and thanks to Don Blake for his usiTwiSlave code which makes this possible
+ http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=51467&start=all&postdays=0&postorder=asc
+ (Changed #define USI_START_COND_INT USISIF (was USICIF) in usiTwiSlave.h)
+
+ NOTE! - It's very important to use pullups on the SDA & SCL lines! More so than with the Wire lib.
+ Current Rx & Tx buffers set at 32 bytes - see usiTwiSlave.h
+
+ USAGE is modeled after the standard Wire library . . .
+ Put in setup():
+ TinyWireS.begin(I2C_SLAVE_ADDR); // initialize I2C lib & setup slave's address (7 bit - same as Wire)
+
+ To Receive:
+ someByte = TinyWireS.available(){ // returns the number of bytes in the received buffer
+ someByte = TinyWireS.receive(){ // returns the next byte in the received buffer
+
+ To Send:
+ TinyWireS.send(uint8_t data){ // sends a requested byte to master
+
+ TODO: (by others!)
+ - onReceive and onRequest handlers are not implimented.
+ - merge this class with TinyWireM for master & slave support in one library
+
+ This library is free software; you can redistribute it and/or modify it under the
+ terms of the GNU General Public License as published by the Free Software
+ Foundation; either version 2.1 of the License, or any later version.
+ This program is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ PARTICULAR PURPOSE. See the GNU General Public License for more details.
+*/
+
+#ifndef TinyWireS_h
+#define TinyWireS_h
+
+#include <inttypes.h>
+
+
+class USI_TWI_S
+{
+ private:
+ //static uint8_t USI_BytesAvail;
+
+ public:
+ USI_TWI_S();
+ void begin(uint8_t I2C_SLAVE_ADDR);
+ void send(uint8_t data);
+ uint8_t available();
+ uint8_t receive();
+ void onReceive( void (*)(uint8_t) );
+ void onRequest( void (*)(void) );
+};
+
+void TinyWireS_stop_check();
+// Implement a delay loop that checks for the stop bit (basically direct copy of the stock arduino implementation from wiring.c)
+void tws_delay(unsigned long);
+
+extern USI_TWI_S TinyWireS;
+
+#endif
+
diff --git a/digital-driver/firmware/TinyWireS/avr_usi_i2c_master.pdf b/digital-driver/firmware/TinyWireS/avr_usi_i2c_master.pdf Binary files differnew file mode 100644 index 0000000..dc8f460 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/avr_usi_i2c_master.pdf diff --git a/digital-driver/firmware/TinyWireS/avr_usi_i2c_slave.pdf b/digital-driver/firmware/TinyWireS/avr_usi_i2c_slave.pdf Binary files differnew file mode 100644 index 0000000..e4704c7 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/avr_usi_i2c_slave.pdf diff --git a/digital-driver/firmware/TinyWireS/examples/TinyWireS_Stress_Master/TinyWireS_Stress_Master.ino b/digital-driver/firmware/TinyWireS/examples/TinyWireS_Stress_Master/TinyWireS_Stress_Master.ino new file mode 100644 index 0000000..d50adb7 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/examples/TinyWireS_Stress_Master/TinyWireS_Stress_Master.ino @@ -0,0 +1,184 @@ +// --------------------------------- +// Stress test program/example for TinyWireS I2C library. +// Run this master program on the Arduino Uno R3. +// Run the other slave program on the Attiny. +// --------------------------------- +// Written by Scott Hartog, 2/6/2016 +// This is the I2C master program which runs on on a regular Arduino +// (not a AtTiny). This program uses the regular Wire library from the Arduino IDE. +// +// It performs these steps in a loop: +// 1. picks a random number of bytes between 1 and 12 +// 2. sends that many bytes of random data to the AtTiny slave within +// a single Wire.beginTransmission() / Wire.write() / Wire.endTransmission() set +// 3. reads that same number of bytes back with a single Wire.requestFrom() call +// 4. compares the received data to the originally transmitted data +// 5. displays the number of requests, number of requests with mismatches, +// and enough of the data so that the operator can tell it's working. +// +#include <Wire.h> + +// BREADBOARD SETUP: +// Arduino Uno R3 (D18/SDA) = I2C SDA +// connect to SDA on slave with external pull-up (~4.7K) +// Arduino Uno R3 (D19/SCL) = I2C SCL +// connect to SCL on slave with external pull-up (~4.7K) +// Arduino Uno R3 (D2) +// connect to !RST on slave +// Can alternatively connect !RST on slave to the Ardiuno "!RESET" pin + +#define I2C_SLAVE_ADDR 0x26 // i2c slave address (38, 0x26) + +#if defined(ESP8266) + // pins that work for Monkey Board ESP8266 12-E + // SCL=5, SDA=4 + #define SLAVE_RESET_PIN 2 + #define ALL_OK_LED_PIN 16 + #define OK_LED_PIN 14 + #define ERROR_LED_PIN 13 +#else + // pins that work for Micro Pro, Uno, Mega 2560 + // reference documentation for SCL and SDA pin locations + // Uno SDA=D18, SCL=D19 + #define SLAVE_RESET_PIN 6 + #define ALL_OK_LED_PIN 9 + #define OK_LED_PIN 7 + #define ERROR_LED_PIN 8 +#endif + +uint16_t count = 0; // total number of passes so far +uint16_t error_count = 0; // total errors encountered so far + +char c_buf[64]; // for creating messages + +void setup() +{ + // set pin modes + pinMode(SLAVE_RESET_PIN,OUTPUT); // active low reset to slave device + pinMode(OK_LED_PIN,OUTPUT); // indicates last transaction matched + pinMode(ALL_OK_LED_PIN,OUTPUT); // indicates all transactions so far have matched + pinMode(ERROR_LED_PIN,OUTPUT); // indicates last transaction mismatched + + // init the serial port + Serial.begin(9600); + + // print some useful pinnout info for the Arduino + //Serial.println(String("SCL:")+String(SCL)+String(", SDA:")+String(SDA)); + //Serial.println(String("MOSI:")+String(MOSI)+String(", SCK:")+String(SCK)); + + // init the Wire object (for I2C) + Wire.begin(); + + // init the i2c clock + // default is 100kHz if not changed + // Wire.setClock(400000L); // 400kHz + + // reset the slave + digitalWrite(SLAVE_RESET_PIN, LOW); + delay(10); + digitalWrite(SLAVE_RESET_PIN, HIGH); + + // set the all okay pin high + digitalWrite(ALL_OK_LED_PIN, HIGH); + + // wait for slave to finish any init sequence + delay(2000); +} + +void loop() +{ + uint8_t i; + uint8_t req_rtn; // num bytes returned by requestFrom() call + uint8_t rand_byte_count; + uint8_t out_rand[16]; // data written from master + uint8_t in_rand[16]; // data read back from slave + + bool mismatch; + + // count total number of request + count++; + + // compute random number of bytes for this pass + rand_byte_count = random(16) + 1; + + // force the first three requests to be small so that the tx buffer doesn't overflow + // instantly and the user can see at least one successful transaction and some + // mismtaches before the usiTwiSlave.c library hangs on the line "while ( !txCount );". + if (count <= 3) rand_byte_count = 2; + + // generate, save, and send N random byte values + Wire.beginTransmission(I2C_SLAVE_ADDR); + for (i = 0; i < rand_byte_count; i++) + Wire.write(out_rand[i] = random(256)); + Wire.endTransmission(); + + // delay 20 milliseconds to accomodate slave onReceive() callback + // function. The actual time that slave takes is application dependent, but + // just storing the master's transmitted data does not take + // anywhere near 20ms. + delay(20); + + // read N bytes from slave + req_rtn = Wire.requestFrom(I2C_SLAVE_ADDR, (int)rand_byte_count); // Request N bytes from slave + for (i = 0; i < req_rtn; i++) + in_rand[i] = Wire.read(); + + // compare in/out data values + mismatch = false; + for (i = 0; i < rand_byte_count; i++) + mismatch = mismatch || (out_rand[i] != in_rand[i]); + + // increment the error counter if the number of byte variables don't match or + // if the data itself doesn't match + if (mismatch || (rand_byte_count != req_rtn)) + { + error_count++; + digitalWrite(ERROR_LED_PIN, HIGH); + digitalWrite(OK_LED_PIN, LOW); + // If there's ever an error, reset the ALL_OK_LED + // and it is not set again until the master resets. + digitalWrite(ALL_OK_LED_PIN, LOW); + } + else + { + digitalWrite(ERROR_LED_PIN, LOW); + digitalWrite(OK_LED_PIN, HIGH); + } + + // The rest of the program just displays the results to the serial port + + // display total requests so far and error count so far + snprintf(c_buf, sizeof(c_buf), "req: %3d,err: %3d", count, error_count); + Serial.println(c_buf); + + // display the random byte count, the number of bytes read back, and "MATCH"/"MISMATCH" + snprintf(c_buf, sizeof(c_buf), "size: %2d/%2d,%s", rand_byte_count, req_rtn, rand_byte_count != req_rtn?"MISMATCH <<--- !!!":"MATCH"); + Serial.println(c_buf); + + // display whether the data compare matched or mismatched + snprintf(c_buf, sizeof(c_buf), "data: %s", mismatch?"MISMATCH <<--- !!!":"MATCH"); + Serial.println(c_buf); + + // send up to three tx/rx bytes so that random data can be + // visually verified + if (rand_byte_count >= 1) + { + snprintf(c_buf, sizeof(c_buf), "rand[0]: %02x/%02x", out_rand[0], in_rand[0]); + Serial.println(c_buf); + } + + if (rand_byte_count >= 2) + { + snprintf(c_buf, sizeof(c_buf), "rand[1]: %02x/%02x", out_rand[1], in_rand[1]); + Serial.println(c_buf); + } + + if (rand_byte_count >= 3) + { + snprintf(c_buf, sizeof(c_buf), "rand[2]: %02x/%02x", out_rand[2], in_rand[2]); + Serial.println(c_buf); + } + + // delay 1 second so user can watch results + delay(1000); +} diff --git a/digital-driver/firmware/TinyWireS/examples/TinyWireS_Stress_Slave/TinyWireS_Stress_Slave.ino b/digital-driver/firmware/TinyWireS/examples/TinyWireS_Stress_Slave/TinyWireS_Stress_Slave.ino new file mode 100644 index 0000000..c7fbe41 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/examples/TinyWireS_Stress_Slave/TinyWireS_Stress_Slave.ino @@ -0,0 +1,143 @@ +// --------------------------------- +// Stress test program/example for TinyWireS I2C library. +// Run this slave program on the Attiny. +// Run the other master program on the Arduino Uno R3. +// --------------------------------- +// // Written by Scott Hartog, 2/6/2016, to stress test the TinyWireS library. +// https://github.com/rambo/TinyWire +// +// This project uses the Tiny85 as an I2C slave. +// +// The slave program using TinyWireS, running on a Attiny85, receives +// N bytes of random data in a single receiveEvent() callback and +// stores that data in a global buffer. It then responds the first requestEvent() +// callback with that same data. The requestEvent() callback overwrites the data +// buffer with zeros after responding so it will only respond correctly to the +// first requestEvent() callback after each receiveEvent() callback. Subsequent +// requestEvent() will respond with 0xff for all data bytes. +// +// +// SETUP: +// AtTiny Pin 5 (PB0/SDA) = I2C SDA +// connect to SDA on master with external pull-up (~4.7K) +// AtTiny Pin 7 (PB0/SCL) = I2C SCL +// connect to SCL on master with external pull-up (~4.7K) +// AtTiny Pin 1 (PB5/!RST) +// connect to reset on master (or just pull-up) +// +// Please see credits and usage for usiTwiSlave and TinyWireS in the .h files of +// those libraries. + +#include <avr/sleep.h> +#include <avr/wdt.h> +#include "TinyWireS.h" // wrapper class for I2C slave routines + +#define I2C_SLAVE_ADDR 0x26 // i2c slave address (38, 0x26) + +// turns on code that makes the Tiny85 sleep between transactions +// This is optional. The Tiny85 current drops from +// about 2mA to about 20uA when the CPU is put into +// PowerDown sleep mode. +#define USE_CPU_SLEEP + +// global buffer to store data sent from the master. +uint8_t master_data[16]; +// global variable to number of bytes sent from the master. +uint8_t master_bytes; + +// Gets called when the ATtiny receives an i2c write slave request +// This routine runs from the usiTwiSlave interrupt service routine (ISR) +// so interrupts are disabled while it runs. +void receiveEvent(uint8_t num_bytes) +{ + uint8_t i; + + // save the number of bytes sent from the master + master_bytes = num_bytes; + + // store the data from the master into the data buffer + for (i = 0; i < master_bytes; i++) + master_data[i] = TinyWireS.receive(); + +} + +// Gets called when the ATtiny receives an i2c read slave request +// This routine runs from the usiTwiSlave interrupt service routine (ISR) +// so interrupts are disabled while it runs. +void requestEvent() +{ + uint8_t i; + + // send the data buffer back to the master + for (i = 0; i < master_bytes; i++) + TinyWireS.send(master_data[i]); + + // corrupt the byte values in the data buffer + // so that any subsequent call won't match + for (i = 0; i < master_bytes; i++) + master_data[i] += 0x5a; + + // corrupt length of the request, but don't make it zero + + // if the usiTwiSlave.c is working fine, then this number is completely irrelevant + // because the requestEvent() callback will not be called again until + // after the next receiveEvent() callback, so the master_data and + // master_bytes variables will be overwritten by that call. + + // If the usiTwiSlave.c has the issue of calling the requestFrom() callback + // for each byte sent, the buffer will accumulate by this amount *for each byte + // in the original request*. (This problem is fixed in the recent version.) + // + // Making it zero will obscure the 1-byte send issue in the usiTwiSlave.c + // that is being tested. + // Making it small will allow a few requests to succeed before the tx buffer + // overflows and the usiTwiSlave.c hangs on the "while ( tmphead == txTail );" + // line + master_bytes = 2; +} + +void setup() +{ + //pinMode(1,OUTPUT); // This pin can be used for rudimentary debug + + // initialize the TinyWireS and usiTwiSlave libraries + TinyWireS.begin(I2C_SLAVE_ADDR); // init I2C Slave mode + + // register the onReceive() callback function + TinyWireS.onReceive(receiveEvent); + + // register the onRequest() callback function + TinyWireS.onRequest(requestEvent); + + // disable the watchdog timer so that it doesn't + // cause power-up, code is from datasheet + // Clear WDRF in MCUSR – MCU Status Register + // MCUSR provides information on which reset source caused an MCU Reset. + MCUSR = 0x00; + // WDTCR - Watchdog Timer Control Register + // Write logical one to WDCE and WDE (must be done before disabling) + WDTCR |= ( _BV(WDCE) | _BV(WDE) ); + // Turn off WDT + WDTCR = 0x00; + +#ifdef USE_CPU_SLEEP + // enable power down sleep mode + set_sleep_mode(SLEEP_MODE_PWR_DOWN); // sleep mode + sleep_enable(); +#endif + + sei(); // enable interrupts + +} + +void loop() +{ + +#ifdef USE_CPU_SLEEP + // optionally put the CPU to sleep. It will be woken by a USI interrupt + // when it sees a "start condition" on the I2C bus. Everything interesting + // happens in the usiTwiSlave ISR. + sleep_cpu(); +#endif + +} diff --git a/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_analog/attiny85_i2c_analog.ino b/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_analog/attiny85_i2c_analog.ino new file mode 100644 index 0000000..7190c93 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_analog/attiny85_i2c_analog.ino @@ -0,0 +1,210 @@ +/** + * Example sketch for writing to and reading from a slave in transactional manner + * + * NOTE: You must not use delay() or I2C communications will fail, use tws_delay() instead (or preferably some smarter timing system) + * + * On write the first byte received is considered the register addres to modify/read + * On each byte sent or read the register address is incremented (and it will loop back to 0) + * + * You can try this with the Arduino I2C REPL sketch at https://github.com/rambo/I2C/blob/master/examples/i2crepl/i2crepl.ino + * If you have bus-pirate remember that the older revisions do not like the slave streching the clock, this leads to all sorts of weird behaviour + * Examples use bus-pirate semantics (like the REPL) + * + * The basic idea is: + * 1. Choose your ADC channel (0-X), use "byte ch = 1;" for example. + * 2. Combine the channel and conversion start flag to single calue: byte start_on_ch = (ch | _BV(7)); // This is 0x81 + * 3. Write start_on_ch to the first register on the attiny [ 8 0 81 ] + * 4. Come back later and check the first register [ 8 0 [ r ], if the value is same as ch then the conversion is complete, you can now read the value + * 5. read the value [ 8 2 [ r r ] (first one is low, second high byte) + * + * You need to have at least 8MHz clock on the ATTiny for this to work (and in fact I have so far tested it only on ATTiny85 @8MHz using internal oscillator) + * Remember to "Burn bootloader" to make sure your chip is in correct mode + */ + + +/** + * Pin notes by Suovula, see also http://hlt.media.mit.edu/?p=1229 + * + * DIP and SOIC have same pinout, however the SOIC chips are much cheaper, especially if you buy more than 5 at a time + * For nice breakout boards see https://github.com/rambo/attiny_boards + * + * Basically the arduino pin numbers map directly to the PORTB bit numbers. + * +// I2C +arduino pin 0 = not(OC1A) = PORTB <- _BV(0) = SOIC pin 5 (I2C SDA, PWM) +arduino pin 2 = = PORTB <- _BV(2) = SOIC pin 7 (I2C SCL, Analog 1) +// Timer1 -> PWM +arduino pin 1 = OC1A = PORTB <- _BV(1) = SOIC pin 6 (PWM) +arduino pin 3 = not(OC1B) = PORTB <- _BV(3) = SOIC pin 2 (Analog 3) +arduino pin 4 = OC1B = PORTB <- _BV(4) = SOIC pin 3 (Analog 2) + */ +#define I2C_SLAVE_ADDRESS 0x4 // the 7-bit address (remember to change this when adapting this example) +// Get this from https://github.com/rambo/TinyWire +#include <TinyWireS.h> +// The default buffer size, though we cannot actually affect it by defining it in the sketch +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif +// For the ADC_xxx helpers +#include <core_adc.h> + +// The "registers" we expose to I2C +volatile uint8_t i2c_regs[] = +{ + 0x0, // Status register, writing (1<<7 & channel) will start a conversion on that channel, the flag will be set low when conversion is done. + 0x1, // Averaging count, make this many conversions in row and average the result (well, actually it's a rolling average since we do not want to have the possibility of integer overflows) + 0x0, // low byte + 0x0, // high byte +}; +const byte reg_size = sizeof(i2c_regs); +// Tracks the current register pointer position +volatile byte reg_position; +// Tracks wheter to start a conversion cycle +volatile boolean start_conversion; +// Counter to track where we are averaging +byte avg_count; +// Some temp value holders +int avg_temp1; +int avg_temp2; + +/** + * This is called for each read request we receive, never put more than one byte of data (with TinyWireS.send) to the + * send-buffer when using this callback + */ +void requestEvent() +{ + TinyWireS.send(i2c_regs[reg_position]); + // Increment the reg position on each read, and loop back to zero + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } +} + +/** + * The I2C data received -handler + * + * This needs to complete before the next incoming transaction (start, data, restart/stop) on the bus does + * so be quick, set flags for long running tasks to be called from the mainloop instead of running them directly, + */ +void receiveEvent(uint8_t howMany) +{ + if (howMany < 1) + { + // Sanity-check + return; + } + if (howMany > TWI_RX_BUFFER_SIZE) + { + // Also insane number + return; + } + + reg_position = TinyWireS.receive(); + howMany--; + if (!howMany) + { + // This write was only to set the buffer for next read + return; + } + while(howMany--) + { + i2c_regs[reg_position] = TinyWireS.receive(); + if ( reg_position == 0 // If it was the first register + && bitRead(i2c_regs[0], 7) // And the highest bit is set + && !ADC_ConversionInProgress() // and we do not actually have a conversion running already + ) + { + start_conversion = true; + } + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } + } +} + + +void setup() +{ + // TODO: Tri-state this and wait for input voltage to stabilize + pinMode(3, OUTPUT); // OC1B-, Arduino pin 3, ADC + digitalWrite(3, LOW); // Note that this makes the led turn on, it's wire this way to allow for the voltage sensing above. + + pinMode(1, OUTPUT); // OC1A, also The only HW-PWM -pin supported by the tiny core analogWrite + + /** + * Reminder: taking care of pull-ups is the masters job + */ + + TinyWireS.begin(I2C_SLAVE_ADDRESS); + TinyWireS.onReceive(receiveEvent); + TinyWireS.onRequest(requestEvent); + + + // Whatever other setup routines ? + + digitalWrite(3, HIGH); +} + +void loop() +{ + /** + * This is the only way we can detect stop condition (http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=984716&sid=82e9dc7299a8243b86cf7969dd41b5b5#984716) + * it needs to be called in a very tight loop in order not to miss any (REMINDER: Do *not* use delay() anywhere, use tws_delay() instead). + * It will call the function registered via TinyWireS.onReceive(); if there is data in the buffer on stop. + */ + TinyWireS_stop_check(); + + // Thus stuff is basically copied from wiring_analog.c + if (start_conversion) + { + //Avoid doubled starts + start_conversion = false; + byte adcpin = (i2c_regs[0] & 0x7f); // Set the channel from the control reg, dropping the highest bit. +#if defined( CORE_ANALOG_FIRST ) + if ( adcpin >= CORE_ANALOG_FIRST ) adcpin -= CORE_ANALOG_FIRST; // allow for channel or pin numbers +#endif + // NOTE: These handy helpers (ADC_xxx) are only present in the tiny-core, for other cores you need to check their wiring_analog.c source. + ADC_SetInputChannel( (adc_ic_t)adcpin ); // we need to typecast + ADC_StartConversion(); + // Reset these variables + avg_count = 0; + avg_temp2 = 0; + } + + if ( bitRead(i2c_regs[0], 7) // We have conversion flag up + && !ADC_ConversionInProgress()) // But the conversion is complete + { + // So handle it + avg_temp1 = ADC_GetDataRegister(); + // Rolling average + if (avg_count) + { + avg_temp2 = (avg_temp2+avg_temp1)/2; + } + else + { + avg_temp2 = avg_temp1; + } + avg_count++; + if (avg_count >= i2c_regs[1]) + { + // All done, set the bytes to registers + cli(); + i2c_regs[2] = lowByte(avg_temp2); + i2c_regs[3] = highByte(avg_temp2); + sei(); + // And clear the conversion flag so the master knows we're ready + bitClear(i2c_regs[0], 7); + } + else + { + // Re-trigger conversion + ADC_StartConversion(); + } + } + +} diff --git a/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_slave/attiny85_i2c_slave.ino b/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_slave/attiny85_i2c_slave.ino new file mode 100644 index 0000000..df2532f --- /dev/null +++ b/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_slave/attiny85_i2c_slave.ino @@ -0,0 +1,152 @@ +/** + * Example sketch for writing to and reading from a slave in transactional manner + * + * NOTE: You must not use delay() or I2C communications will fail, use tws_delay() instead (or preferably some smarter timing system) + * + * On write the first byte received is considered the register addres to modify/read + * On each byte sent or read the register address is incremented (and it will loop back to 0) + * + * You can try this with the Arduino I2C REPL sketch at https://github.com/rambo/I2C/blob/master/examples/i2crepl/i2crepl.ino + * If you have bus-pirate remember that the older revisions do not like the slave streching the clock, this leads to all sorts of weird behaviour + * + * To read third value (register number 2 since counting starts at 0) send "[ 8 2 [ 9 r ]", value read should be 0xBE + * If you then send "[ 9 r r r ]" you should get 0xEF 0xDE 0xAD as response (demonstrating the register counter looping back to zero) + * + * You need to have at least 8MHz clock on the ATTiny for this to work (and in fact I have so far tested it only on ATTiny85 @8MHz using internal oscillator) + * Remember to "Burn bootloader" to make sure your chip is in correct mode + */ + + +/** + * Pin notes by Suovula, see also http://hlt.media.mit.edu/?p=1229 + * + * DIP and SOIC have same pinout, however the SOIC chips are much cheaper, especially if you buy more than 5 at a time + * For nice breakout boards see https://github.com/rambo/attiny_boards + * + * Basically the arduino pin numbers map directly to the PORTB bit numbers. + * +// I2C +arduino pin 0 = not(OC1A) = PORTB <- _BV(0) = SOIC pin 5 (I2C SDA, PWM) +arduino pin 2 = = PORTB <- _BV(2) = SOIC pin 7 (I2C SCL, Analog 1) +// Timer1 -> PWM +arduino pin 1 = OC1A = PORTB <- _BV(1) = SOIC pin 6 (PWM) +arduino pin 3 = not(OC1B) = PORTB <- _BV(3) = SOIC pin 2 (Analog 3) +arduino pin 4 = OC1B = PORTB <- _BV(4) = SOIC pin 3 (Analog 2) + */ +#define I2C_SLAVE_ADDRESS 0x4 // the 7-bit address (remember to change this when adapting this example) +// Get this from https://github.com/rambo/TinyWire +#include <TinyWireS.h> +// The default buffer size, Can't recall the scope of defines right now +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif + + +volatile uint8_t i2c_regs[] = +{ + 0xDE, + 0xAD, + 0xBE, + 0xEF, +}; +// Tracks the current register pointer position +volatile byte reg_position; +const byte reg_size = sizeof(i2c_regs); + +/** + * This is called for each read request we receive, never put more than one byte of data (with TinyWireS.send) to the + * send-buffer when using this callback + */ +void requestEvent() +{ + TinyWireS.send(i2c_regs[reg_position]); + // Increment the reg position on each read, and loop back to zero + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } +} + +// TODO: Either update this to use something smarter for timing or remove it alltogether +void blinkn(uint8_t blinks) +{ + digitalWrite(3, HIGH); + while(blinks--) + { + digitalWrite(3, LOW); + tws_delay(50); + digitalWrite(3, HIGH); + tws_delay(100); + } +} + +/** + * The I2C data received -handler + * + * This needs to complete before the next incoming transaction (start, data, restart/stop) on the bus does + * so be quick, set flags for long running tasks to be called from the mainloop instead of running them directly, + */ +void receiveEvent(uint8_t howMany) +{ + if (howMany < 1) + { + // Sanity-check + return; + } + if (howMany > TWI_RX_BUFFER_SIZE) + { + // Also insane number + return; + } + + reg_position = TinyWireS.receive(); + howMany--; + if (!howMany) + { + // This write was only to set the buffer for next read + return; + } + while(howMany--) + { + i2c_regs[reg_position] = TinyWireS.receive(); + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } + } +} + + +void setup() +{ + // TODO: Tri-state this and wait for input voltage to stabilize + pinMode(3, OUTPUT); // OC1B-, Arduino pin 3, ADC + digitalWrite(3, LOW); // Note that this makes the led turn on, it's wire this way to allow for the voltage sensing above. + + pinMode(1, OUTPUT); // OC1A, also The only HW-PWM -pin supported by the tiny core analogWrite + + /** + * Reminder: taking care of pull-ups is the masters job + */ + + TinyWireS.begin(I2C_SLAVE_ADDRESS); + TinyWireS.onReceive(receiveEvent); + TinyWireS.onRequest(requestEvent); + + + // Whatever other setup routines ? + + digitalWrite(3, HIGH); +} + +void loop() +{ + /** + * This is the only way we can detect stop condition (http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=984716&sid=82e9dc7299a8243b86cf7969dd41b5b5#984716) + * it needs to be called in a very tight loop in order not to miss any (REMINDER: Do *not* use delay() anywhere, use tws_delay() instead). + * It will call the function registered via TinyWireS.onReceive(); if there is data in the buffer on stop. + */ + TinyWireS_stop_check(); +} diff --git a/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_slave_task/attiny85_i2c_slave_task.ino b/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_slave_task/attiny85_i2c_slave_task.ino new file mode 100644 index 0000000..4b3f269 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/examples/attiny85_i2c_slave_task/attiny85_i2c_slave_task.ino @@ -0,0 +1,246 @@ +/** + * Example sketch for writing to and reading from a slave in transactional manner, it will also blink a led attached to pin 3 (which is the SOIC pin 2) + * (provided you're using one of my ATTiny85 boards from https://github.com/rambo/attiny_boards with the led soldered) + * + * NOTE: You must not use delay() or I2C communications will fail, use tws_delay() instead (or preferably some smarter timing system, like the Task library used in this example) + * + * On write the first byte received is considered the register addres to modify/read + * On each byte sent or read the register address is incremented (and it will loop back to 0) + * + * You can try this with the Arduino I2C REPL sketch at https://github.com/rambo/I2C/blob/master/examples/i2crepl/i2crepl.ino + * If you have bus-pirate remember that the older revisions do not like the slave streching the clock, this leads to all sorts of weird behaviour + * + * By default this blinks the SOS morse pattern and then has long on/off time to indicate end of pattern, send [ 8 0 32 ] (using the REPL/bus-pirate + * semantics) to make the delay per bit smaller (and thus blinking faster). The pattern lenght is calculated from the register size, it would be fairly + * trivial to make it yet another variable changeable via I2C. + * + * You need to have at least 8MHz clock on the ATTiny for this to work (and in fact I have so far tested it only on ATTiny85 @8MHz using internal oscillator) + * Remember to "Burn bootloader" to make sure your chip is in correct mode + */ + + +/** + * Pin notes by Suovula, see also http://hlt.media.mit.edu/?p=1229 + * + * DIP and SOIC have same pinout, however the SOIC chips are much cheaper, especially if you buy more than 5 at a time + * For nice breakout boards see https://github.com/rambo/attiny_boards + * + * Basically the arduino pin numbers map directly to the PORTB bit numbers. + * +// I2C +arduino pin 0 = not(OC1A) = PORTB <- _BV(0) = SOIC pin 5 (I2C SDA, PWM) +arduino pin 2 = = PORTB <- _BV(2) = SOIC pin 7 (I2C SCL, Analog 1) +// Timer1 -> PWM +arduino pin 1 = OC1A = PORTB <- _BV(1) = SOIC pin 6 (PWM) +arduino pin 3 = not(OC1B) = PORTB <- _BV(3) = SOIC pin 2 (Analog 3) +arduino pin 4 = OC1B = PORTB <- _BV(4) = SOIC pin 3 (Analog 2) + */ +#define I2C_SLAVE_ADDRESS 0x4 // the 7-bit address (remember to change this when adapting this example) +// Get this from https://github.com/rambo/TinyWire +#include <TinyWireS.h> +// The default buffer size, Can't recall the scope of defines right now +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif +// Get this library from http://bleaklow.com/files/2010/Task.tar.gz +// and read http://bleaklow.com/2010/07/20/a_very_simple_arduino_task_manager.html for background and instructions +#include <Task.h> +#include <TaskScheduler.h> + +// The led is connected so that the tiny sinks current +#define LED_ON LOW +#define LED_OFF HIGH + +// The I2C registers +volatile uint8_t i2c_regs[] = +{ + 150, // Delay between each position (ms, remeber that this isa byte so 255 is max) + B10101000, // SOS pattern + B01110111, + B01110001, + B01010000, + B00000000, + B11111111, // Long on and off to mark end of pattern + B00000000, +}; +// Tracks the current register pointer position +volatile byte reg_position; +const byte reg_size = sizeof(i2c_regs); + + +/** + * BEGIN: PatternBlinker task based on the Task library Blinker example + */ +// Timed task to blink a LED. +const byte pattern_lenght = (sizeof(i2c_regs)-1) * 8; // bits (first is the speed, rest is the pattern) +class PatternBlinker : public TimedTask +{ +public: + // Create a new blinker for the specified pin and rate. + PatternBlinker(uint8_t _pin); + virtual void run(uint32_t now); +private: + uint8_t pin; // LED pin. + uint8_t pattern_position; // Used to calcuate the register and bit offset +}; + +PatternBlinker::PatternBlinker(uint8_t _pin) +: TimedTask(millis()), + pin(_pin) +{ + pinMode(pin, OUTPUT); // Set pin for output. +} + +void PatternBlinker::run(uint32_t now) +{ + // Start by setting the next runtime + incRunTime(i2c_regs[0]); + + // Written out for clear code, the complier might optimize it to something more efficient even without it being unrolled into one line + byte reg = i2c_regs[1+(pattern_position/8)]; // Get the register where the bit pattern position is stored + byte shift_amount = 7 - (pattern_position % 7); // To have "natural" left-to-right pattern flow. + bool state = (reg >> shift_amount) & 0x1; + if (state) { + digitalWrite(pin, LED_ON); + } else { + digitalWrite(pin, LED_OFF); + } + // Calculate the next pattern position + pattern_position = (pattern_position+1) % pattern_lenght; +} +/** + * END: PatternBlinker task copied from the Task library example + */ +/** + * BEGIN: I2C Stop flag checker + * + * This task needs to run almost all the time due to the USI I2C implementation limitations + * + * So I2CStopCheck_YIELD_TICKS below is used to specify how often the task is run, not it's every 4 ticks + */ +#define I2CStopCheck_YIELD_TICKS 4 +class I2CStopCheck : public Task +{ +public: + I2CStopCheck(); + virtual void run(uint32_t now); + virtual bool canRun(uint32_t now); +private: + uint8_t yield_counter; // Incremented on each canRun call, used to yield to other tasks. +}; + +I2CStopCheck::I2CStopCheck() +: Task() +{ +} + +// We can't just return true since then no other task could ever run (since we have the priority) +bool I2CStopCheck::canRun(uint32_t now) +{ + yield_counter++; + bool ret = false; + if (yield_counter == I2CStopCheck_YIELD_TICKS) + { + ret = true; + yield_counter = 0; + } + return ret; +} + +void I2CStopCheck::run(uint32_t now) +{ + TinyWireS_stop_check(); +} +/** + * END: I2C Stop flag checker + */ + +// Create the tasks. +PatternBlinker blinker(3); +I2CStopCheck checker; + +// Tasks are in priority order, only one task is run per tick +Task *tasks[] = { &checker, &blinker, }; +TaskScheduler sched(tasks, NUM_TASKS(tasks)); + + +/** + * This is called for each read request we receive, never put more than one byte of data (with TinyWireS.send) to the + * send-buffer when using this callback + */ +void requestEvent() +{ + TinyWireS.send(i2c_regs[reg_position]); + // Increment the reg position on each read, and loop back to zero + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } +} + +/** + * The I2C data received -handler + * + * This needs to complete before the next incoming transaction (start, data, restart/stop) on the bus does + * so be quick, set flags for long running tasks to be called from the mainloop instead of running them directly, + */ +void receiveEvent(uint8_t howMany) +{ + if (howMany < 1) + { + // Sanity-check + return; + } + if (howMany > TWI_RX_BUFFER_SIZE) + { + // Also insane number + return; + } + + reg_position = TinyWireS.receive(); + howMany--; + if (!howMany) + { + // This write was only to set the buffer for next read + return; + } + while(howMany--) + { + i2c_regs[reg_position] = TinyWireS.receive(); + reg_position++; + if (reg_position >= reg_size) + { + reg_position = 0; + } + } +} + + +void setup() +{ + // TODO: Tri-state this and wait for input voltage to stabilize + pinMode(3, OUTPUT); // OC1B-, Arduino pin 3, ADC + digitalWrite(3, LED_ON); // Note that this makes the led turn on, it's wire this way to allow for the voltage sensing above. + + pinMode(1, OUTPUT); // OC1A, also The only HW-PWM -pin supported by the tiny core analogWrite + + /** + * Reminder: taking care of pull-ups is the masters job + */ + + TinyWireS.begin(I2C_SLAVE_ADDRESS); + TinyWireS.onReceive(receiveEvent); + TinyWireS.onRequest(requestEvent); + + + // Whatever other setup routines ? + + digitalWrite(3, LED_OFF); +} + +void loop() +{ + // Run the scheduler - never returns. + sched.run(); +} diff --git a/digital-driver/firmware/TinyWireS/keywords.txt b/digital-driver/firmware/TinyWireS/keywords.txt new file mode 100644 index 0000000..ccc0b46 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/keywords.txt @@ -0,0 +1,27 @@ +#######################################
+# Syntax Coloring Map For TinyWireS
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+begin KEYWORD2
+send KEYWORD2
+available KEYWORD2
+receive KEYWORD2
+
+#######################################
+# Instances (KEYWORD2)
+#######################################
+
+TinyWireS KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+
diff --git a/digital-driver/firmware/TinyWireS/usiTwiSlave.c b/digital-driver/firmware/TinyWireS/usiTwiSlave.c new file mode 100644 index 0000000..a263184 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/usiTwiSlave.c @@ -0,0 +1,748 @@ +/******************************************************************************** + +USI TWI Slave driver. + +Created by Donald R. Blake. donblake at worldnet.att.net +Adapted by Jochen Toppe, jochen.toppe at jtoee.com + +--------------------------------------------------------------------------------- + +Created from Atmel source files for Application Note AVR312: Using the USI Module +as an I2C slave. + +This program is free software; you can redistribute it and/or modify it under the +terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A +PARTICULAR PURPOSE. See the GNU General Public License for more details. + +--------------------------------------------------------------------------------- + +Change Activity: + + Date Description + ------ ------------- + 16 Mar 2007 Created. + 27 Mar 2007 Added support for ATtiny261, 461 and 861. + 26 Apr 2007 Fixed ACK of slave address on a read. + 04 Jul 2007 Fixed USISIF in ATtiny45 def + 12 Dev 2009 Added callback functions for data requests + 06 Feb 2016 Minor change to allow mutli-byte requestFrom() from master. + 10 Feb 2016 Simplied RX/TX buffer code and allowed use of full buffer. + 13 Feb 2016 Made USI_RECEIVE_CALLBACK() callback fully interrupt-driven + 12 Dec 2016 Added support for ATtiny167 + 23 Dec 2017 Fixed repeated restart (which broke when making receive callback + interrupt-driven) + +********************************************************************************/ + + +/******************************************************************************** + includes +********************************************************************************/ + +#include <avr/io.h> +#include <avr/interrupt.h> + +#include "usiTwiSlave.h" +//#include "../common/util.h" + + +/******************************************************************************** + device dependent defines +********************************************************************************/ + +#if defined( __AVR_ATtiny167__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +#if defined( __AVR_ATtiny2313__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB5 +# define PORT_USI_SCL PB7 +# define PIN_USI_SDA PINB5 +# define PIN_USI_SCL PINB7 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +#if defined(__AVR_ATtiny84__) | \ + defined(__AVR_ATtiny44__) +# define DDR_USI DDRA +# define PORT_USI PORTA +# define PIN_USI PINA +# define PORT_USI_SDA PORTA6 +# define PORT_USI_SCL PORTA4 +# define PIN_USI_SDA PINA6 +# define PIN_USI_SCL PINA4 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATtiny25__ ) | \ + defined( __AVR_ATtiny45__ ) | \ + defined( __AVR_ATtiny85__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATtiny26__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_STRT_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATtiny261__ ) | \ + defined( __AVR_ATtiny461__ ) | \ + defined( __AVR_ATtiny861__ ) +# define DDR_USI DDRB +# define PORT_USI PORTB +# define PIN_USI PINB +# define PORT_USI_SDA PB0 +# define PORT_USI_SCL PB2 +# define PIN_USI_SDA PINB0 +# define PIN_USI_SCL PINB2 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVF_vect +#endif + +#if defined( __AVR_ATmega165__ ) | \ + defined( __AVR_ATmega325__ ) | \ + defined( __AVR_ATmega3250__ ) | \ + defined( __AVR_ATmega645__ ) | \ + defined( __AVR_ATmega6450__ ) | \ + defined( __AVR_ATmega329__ ) | \ + defined( __AVR_ATmega3290__ ) +# define DDR_USI DDRE +# define PORT_USI PORTE +# define PIN_USI PINE +# define PORT_USI_SDA PE5 +# define PORT_USI_SCL PE4 +# define PIN_USI_SDA PINE5 +# define PIN_USI_SCL PINE4 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +#if defined( __AVR_ATmega169__ ) +# define DDR_USI DDRE +# define PORT_USI PORTE +# define PIN_USI PINE +# define PORT_USI_SDA PE5 +# define PORT_USI_SCL PE4 +# define PIN_USI_SDA PINE5 +# define PIN_USI_SCL PINE4 +# define USI_START_COND_INT USISIF +# define USI_START_VECTOR USI_START_vect +# define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect +#endif + +// These macros make the stop condition detection code more readable. +#define USI_PINS_SCL_SDA ( ( 1 << PIN_USI_SDA ) | ( 1 << PIN_USI_SCL ) ) +#define USI_PINS_SDA ( 1 << PIN_USI_SDA ) +#define USI_PINS_SCL ( 1 << PIN_USI_SCL ) + +/******************************************************************************** + + functions implemented as macros + +********************************************************************************/ + +#define SET_USI_TO_SEND_ACK( ) \ +{ \ + /* prepare ACK, ack is a zero */ \ + USIDR = 0; \ + /* set SDA as output */ \ + DDR_USI |= ( 1 << PORT_USI_SDA ); \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | \ + ( 1 << USIOIF ) | ( 1 << USIPF ) | \ + ( 1 << USIDC )| \ + /* set USI counter to shift 1 bit */ \ + ( 0x0E << USICNT0 ); \ +} + +#define SET_USI_TO_READ_ACK( ) \ +{ \ + /* set SDA as input */ \ + DDR_USI &= ~( 1 << PORT_USI_SDA ); \ + /* prepare ACK */ \ + USIDR = 0; \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | \ + ( 1 << USIOIF ) | \ + ( 1 << USIPF ) | \ + ( 1 << USIDC ) | \ + /* set USI counter to shift 1 bit */ \ + ( 0x0E << USICNT0 ); \ +} + +#define SET_USI_TO_TWI_START_CONDITION_MODE( ) \ +{ \ + USICR = \ + /* enable Start Condition Interrupt, disable Overflow Interrupt */ \ + ( 1 << USISIE ) | ( 0 << USIOIE ) | \ + /* set USI in Two-wire mode, no USI Counter overflow hold */ \ + ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | \ + /* Shift Register Clock Source = External, positive edge */ \ + /* 4-Bit Counter Source = external, both edges */ \ + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | \ + /* no toggle clock-port pin */ \ + ( 0 << USITC ); \ + USISR = \ + /* clear all interrupt flags, except Start Cond */ \ + ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | \ + ( 1 << USIDC ) | ( 0x0 << USICNT0 ); \ +} + +#define SET_USI_TO_SEND_DATA( ) \ +{ \ + /* set SDA as output */ \ + DDR_USI |= ( 1 << PORT_USI_SDA ); \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | \ + ( 1 << USIDC) | \ + /* set USI to shift out 8 bits */ \ + ( 0x0 << USICNT0 ); \ +} + +#define SET_USI_TO_READ_DATA( ) \ +{ \ + /* set SDA as input */ \ + DDR_USI &= ~( 1 << PORT_USI_SDA ); \ + /* clear all interrupt flags, except Start Cond */ \ + USISR = \ + ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | \ + ( 1 << USIPF ) | ( 1 << USIDC ) | \ + /* set USI to shift out 8 bits */ \ + ( 0x0 << USICNT0 ); \ +} + +#define USI_RECEIVE_CALLBACK() \ +{ \ + if (usi_onReceiverPtr) \ + { \ + if (usiTwiAmountDataInReceiveBuffer()) \ + { \ + usi_onReceiverPtr(usiTwiAmountDataInReceiveBuffer()); \ + } \ + } \ +} + +#define USI_REQUEST_CALLBACK() \ +{ \ + if(usi_onRequestPtr) usi_onRequestPtr(); \ +} + +/******************************************************************************** + + typedef's + +********************************************************************************/ + +typedef enum +{ + USI_SLAVE_CHECK_ADDRESS = 0x00, + USI_SLAVE_SEND_DATA = 0x01, + USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA = 0x02, + USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA = 0x03, + USI_SLAVE_REQUEST_DATA = 0x04, + USI_SLAVE_GET_DATA_AND_SEND_ACK = 0x05 +} overflowState_t; + + + +/******************************************************************************** + + local variables + +********************************************************************************/ + +static uint8_t slaveAddress; +static uint8_t sleep_enable_bit; +static uint8_t in_transaction; +static volatile overflowState_t overflowState; + + +static uint8_t rxBuf[ TWI_RX_BUFFER_SIZE ]; +static volatile uint8_t rxHead; +static volatile uint8_t rxTail; +static volatile uint8_t rxCount; + +static uint8_t txBuf[ TWI_TX_BUFFER_SIZE ]; +static volatile uint8_t txHead; +static volatile uint8_t txTail; +static volatile uint8_t txCount; + + + +/******************************************************************************** + + local functions + +********************************************************************************/ + +// flushes the TWI buffers + +static void flushTwiBuffers( void ) +{ + rxTail = 0; + rxHead = 0; + rxCount = 0; + txTail = 0; + txHead = 0; + txCount = 0; +} // end flushTwiBuffers + + + +/******************************************************************************** + + public functions + +********************************************************************************/ + +// initialise USI for TWI slave mode + +void usiTwiSlaveInit( uint8_t ownAddress ) +{ + // initialize the TX and RX buffers to empty + flushTwiBuffers( ); + + slaveAddress = ownAddress; + + // In Two Wire mode (USIWM1, USIWM0 = 1X), the slave USI will pull SCL + // low when a start condition is detected or a counter overflow (only + // for USIWM1, USIWM0 = 11). This inserts a wait state. SCL is released + // by the ISRs (USI_START_vect and USI_OVERFLOW_vect). + + // Set SCL and SDA as output + DDR_USI |= ( 1 << PORT_USI_SCL ) | ( 1 << PORT_USI_SDA ); + + // set SCL high + PORT_USI |= ( 1 << PORT_USI_SCL ); + + // set SDA high + PORT_USI |= ( 1 << PORT_USI_SDA ); + + // Set SDA as input + DDR_USI &= ~( 1 << PORT_USI_SDA ); + + USICR = + // enable Start Condition Interrupt + ( 1 << USISIE ) | + // disable Overflow Interrupt + ( 0 << USIOIE ) | + // set USI in Two-wire mode, no USI Counter overflow hold + ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | + // Shift Register Clock Source = external, positive edge + // 4-Bit Counter Source = external, both edges + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | + // no toggle clock-port pin + ( 0 << USITC ); + + // clear all interrupt flags and reset overflow counter + + USISR = ( 1 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | ( 1 << USIDC ); + + // The 'in_transaction' variable remembers if the usiTwiSlave driver is in the middle of + // an i2c transaction. Initialize it to zero + in_transaction = 0; + +} // end usiTwiSlaveInit + + +bool usiTwiDataInTransmitBuffer(void) +{ + + // return 0 (false) if the receive buffer is empty + return txCount; + +} // end usiTwiDataInTransmitBuffer + + +// put data in the transmission buffer, wait if buffer is full + +void usiTwiTransmitByte( uint8_t data ) +{ + + // wait for free space in buffer + while ( txCount == TWI_TX_BUFFER_SIZE) ; + + // store data in buffer + txBuf[ txHead ] = data; + txHead = ( txHead + 1 ) & TWI_TX_BUFFER_MASK; + txCount++; + +} // end usiTwiTransmitByte + + +// return a byte from the receive buffer, wait if buffer is empty + +uint8_t usiTwiReceiveByte( void ) +{ + uint8_t rtn_byte; + + // wait for Rx data + while ( !rxCount ); + + rtn_byte = rxBuf [ rxTail ]; + // calculate buffer index + rxTail = ( rxTail + 1 ) & TWI_RX_BUFFER_MASK; + rxCount--; + + // return data from the buffer. + return rtn_byte; + +} // end usiTwiReceiveByte + + +uint8_t usiTwiAmountDataInReceiveBuffer(void) +{ + return rxCount; +} + + +/******************************************************************************** + + USI Start Condition ISR + +********************************************************************************/ + +ISR( USI_START_VECTOR ) +{ + uint8_t usi_pins; + // http://www.atmel.com/webdoc/AVRLibcReferenceManual/group__avr__interrupts.html + + // Notes about ISR. The compiler in the Arduino IDE handles some of the + // basic ISR plumbing (unless the "ISR_NAKED" attribute is applied). + // * The AVR processor resets the SREG.I bit when jumping into an ISR + // * The compiler automatically adds code to save SREG + // * < user's ISR code goes here > + // * The compiler automatically adds code to restore SREG + // * The compiler automatically uses the RETI instruction to return from the ISR. + // The RETI instruction enables interrupts after the return from ISR. + // The compiler behavior can be altered with attributes into the ISR declaration; + // however, the description above is the default. + + // cli() call is not necessary. Processor disables interrupts when + // jumping to an ISR + + // no need to save the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + if ( !in_transaction ) + { + // remeber the sleep enable bit when entering the ISR + sleep_enable_bit = MCUCR & ( 1 << SE ); + + // clear the sleep enable bit to prevent the CPU from entering sleep mode while executing this ISR. + MCUCR &= ~( 1 << SE ); + } + + // set default starting conditions for new TWI package + overflowState = USI_SLAVE_CHECK_ADDRESS; + + // set SDA as input + DDR_USI &= ~( 1 << PORT_USI_SDA ); + + // the start condition is that the master pulls SDA low. + + // wait for SCL to go low to ensure the Start Condition has completed (the + // start detector will hold SCL low ) - if a Stop Condition arises then leave + // the interrupt to prevent waiting forever - don't use USISR to test for Stop + // Condition as in Application Note AVR312 because the Stop Condition Flag is + // going to be set from the last TWI sequence + + // while SCL is high and SDA is low + while ( ( usi_pins = PIN_USI & USI_PINS_SCL_SDA ) == USI_PINS_SCL ); + + // if SDA line was low at SCL edge, then start condition occurred + if ( !( usi_pins & USI_PINS_SDA ) ) + { + // a Stop Condition did not occur + + // Execute callback if this is a repeated start + if (in_transaction) + { + USI_RECEIVE_CALLBACK(); + } + + USICR = + // keep Start Condition Interrupt enabled to detect RESTART + ( 1 << USISIE ) | + // enable Overflow Interrupt + ( 1 << USIOIE ) | + // set USI in Two-wire mode, hold SCL low on USI Counter overflow + ( 1 << USIWM1 ) | ( 1 << USIWM0 ) | + // Shift Register Clock Source = External, positive edge + // 4-Bit Counter Source = external, both edges + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | + // no toggle clock-port pin + ( 0 << USITC ); + + //remember that the USI is in a valid i2c transaction + in_transaction = 1; + + } + else + { + // a Stop Condition did occur + + USICR = + // enable Start Condition Interrupt + ( 1 << USISIE ) | + // disable Overflow Interrupt + ( 0 << USIOIE ) | + // set USI in Two-wire mode, no USI Counter overflow hold + ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | + // Shift Register Clock Source = external, positive edge + // 4-Bit Counter Source = external, both edges + ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | + // no toggle clock-port pin + ( 0 << USITC ); + + //no longer in valid i2c transaction + in_transaction = 0; + // restore the sleep enable bit + MCUCR |= sleep_enable_bit; + + } // end if + + USISR = + // clear interrupt flags - resetting the Start Condition Flag will + // release SCL + ( 1 << USI_START_COND_INT ) | ( 1 << USIOIF ) | + ( 1 << USIPF ) |( 1 << USIDC ) | + // set USI to sample 8 bits (count 16 external SCL pin toggles) + ( 0x0 << USICNT0); + + // no need to restore the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + // The compiler automatically uses an RETI instruction to return when using the + // ISR construct without modifying attributes. + +} // end ISR( USI_START_VECTOR ) + + + +/******************************************************************************** + + USI Overflow ISR + +Handles all the communication. + +Only disabled when waiting for a new Start Condition. + +********************************************************************************/ + +ISR( USI_OVERFLOW_VECTOR ) +{ + uint8_t finished; + uint8_t usi_pins; + + // http://www.atmel.com/webdoc/AVRLibcReferenceManual/group__avr__interrupts.html + + // Notes about ISR. The compiler in the Arduino IDE handles some of the + // basic ISR plumbing. + // * The AVR processor resets the SREG.I bit when jumping into an ISR + // * The compiler automatically adds code to save the SREG + // * < user's ISR code goes here > + // * The compiler automatically adds code to restore the SREG + // * The compiler automatically uses the RETI instruction to return from the ISR. + // The RETI insturction enables interrupts after the return from ISR. + // The compiler behavior can be altered with attributes into the ISR declaration; + // however, the description above is the default. + + // cli() call is not necessary. Processor disables interrupts when + // jumping to an ISR + + // no need to save the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + // The ISR is only ever entered because the ISR(USI_START_VECTOR) interrupt + // routine ran first. That routine saved the sleep mode and disabled sleep. + + // Most of the time this routine exits, it has setup the USI to shift in/out bits + // and is expected to re-entered because of the USI overflow interrupt. Track whether or + // not the transaction is completely finished. + finished = 0; + + + switch ( overflowState ) + { + + // Address mode: check address and send ACK (and next USI_SLAVE_SEND_DATA) if OK, + // else reset USI + case USI_SLAVE_CHECK_ADDRESS: + if ( ( USIDR == 0 ) || ( ( USIDR >> 1 ) == slaveAddress) ) + { + if ( USIDR & 0x01 ) + { + overflowState = USI_SLAVE_SEND_DATA; + } + else + { + overflowState = USI_SLAVE_REQUEST_DATA; + } // end if + + // ack the start frame + // sets up the USI to pull SDA low and clock one bit (two edges) + SET_USI_TO_SEND_ACK( ); + } + else + { + SET_USI_TO_TWI_START_CONDITION_MODE( ); + finished = 1; + } + break; + + // master-read / slave-send: check reply and goto USI_SLAVE_SEND_DATA if OK, + // else reset USI + case USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA: + // Execute request callback for each byte requested, as this is the intended + // behavior of this library + USI_REQUEST_CALLBACK(); + if ( USIDR ) + { + // if NACK, the master does not want more data + SET_USI_TO_TWI_START_CONDITION_MODE( ); + finished = 1; + break; + } + // from here we just drop straight into USI_SLAVE_SEND_DATA if the + // master sent an ACK + + // copy data from buffer to USIDR and set USI to shift byte + // next USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA + case USI_SLAVE_SEND_DATA: + // Get data from Buffer + if ( txCount ) + { + USIDR = txBuf[ txTail ]; + txTail = ( txTail + 1 ) & TWI_TX_BUFFER_MASK; + txCount--; + + overflowState = USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA; + SET_USI_TO_SEND_DATA( ); + } + else + { + // the buffer is empty + SET_USI_TO_READ_ACK( ); // This might be neccessary sometimes see http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=805227#805227 + SET_USI_TO_TWI_START_CONDITION_MODE( ); + } // end if + break; + + // set USI to sample reply from master + // next USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA + case USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA: + overflowState = USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA; + SET_USI_TO_READ_ACK( ); + break; + + // master-send / slave-receive: set USI to sample data from master, next + // USI_SLAVE_GET_DATA_AND_SEND_ACK + case USI_SLAVE_REQUEST_DATA: + overflowState = USI_SLAVE_GET_DATA_AND_SEND_ACK; + SET_USI_TO_READ_DATA( ); + + // with the SET_USI_TO_READ_DATA() macro call above, the USI has + // been setup to catch the next byte if the master sends one. + // while that's going on, look for a stop condition here which + // is when the SDA line goes high after the SCL line; + + // wait until SCL goes high + while ( ! ( ( usi_pins = PIN_USI & USI_PINS_SCL_SDA ) & USI_PINS_SCL ) ); + + // if SDA line was high at SCL edge, then not a stop condition + if ( usi_pins & USI_PINS_SDA ) + break; + + // wait until SCL goes low or SDA goes high + while ( ( usi_pins = PIN_USI & USI_PINS_SCL_SDA ) == USI_PINS_SCL ); + + // if both SCL and SDA are high, then stop condition occurred + if ( usi_pins == USI_PINS_SCL_SDA ) + { + USI_RECEIVE_CALLBACK(); + SET_USI_TO_TWI_START_CONDITION_MODE( ); + finished = 1; + } + + break; + + // copy data from USIDR and send ACK + // next USI_SLAVE_REQUEST_DATA + case USI_SLAVE_GET_DATA_AND_SEND_ACK: + // put data into buffer + // check buffer size + if ( rxCount < TWI_RX_BUFFER_SIZE ) + { + rxBuf[ rxHead ] = USIDR; + rxHead = ( rxHead + 1 ) & TWI_RX_BUFFER_MASK; + rxCount++; + } else { + // overrun + // drop data + } + // next USI_SLAVE_REQUEST_DATA + overflowState = USI_SLAVE_REQUEST_DATA; + SET_USI_TO_SEND_ACK( ); + break; + + } // end switch + + if (finished) + { + //no longer in valid i2c transaction + in_transaction = 0; + // restore the sleep enable bit + // note that this allows sleep -- it does not cause sleep + MCUCR |= sleep_enable_bit; + } + + // no need to restore the SREG. The compiler does this automatically when using the + // ISR construct without modifying attributes. + + // The compiler automatically uses an RETI instruction to return when using the + // ISR construct without modifying attributes. + +} // end ISR( USI_OVERFLOW_VECTOR ) diff --git a/digital-driver/firmware/TinyWireS/usiTwiSlave.h b/digital-driver/firmware/TinyWireS/usiTwiSlave.h new file mode 100644 index 0000000..88b9445 --- /dev/null +++ b/digital-driver/firmware/TinyWireS/usiTwiSlave.h @@ -0,0 +1,96 @@ +/******************************************************************************** + +Header file for the USI TWI Slave driver. + +Created by Donald R. Blake +donblake at worldnet.att.net + +--------------------------------------------------------------------------------- + +Created from Atmel source files for Application Note AVR312: Using the USI Module +as an I2C slave. + +This program is free software; you can redistribute it and/or modify it under the +terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A +PARTICULAR PURPOSE. See the GNU General Public License for more details. + +--------------------------------------------------------------------------------- + +Change Activity: + + Date Description + ------ ------------- + 15 Mar 2007 Created. + +********************************************************************************/ + + + +#ifndef _USI_TWI_SLAVE_H_ +#define _USI_TWI_SLAVE_H_ + + + +/******************************************************************************** + + includes + +********************************************************************************/ + +#include <stdbool.h> +#include <avr/sleep.h> + + + +/******************************************************************************** + + prototypes + +********************************************************************************/ + +void usiTwiSlaveInit( uint8_t ); +void usiTwiTransmitByte( uint8_t ); +uint8_t usiTwiReceiveByte( void ); +bool usiTwiDataInTransmitBuffer(void); +uint8_t usiTwiAmountDataInReceiveBuffer(void); +// on_XXX handler pointers +void (*usi_onRequestPtr)(void); +void (*usi_onReceiverPtr)(uint8_t); + + +/******************************************************************************** + + driver buffer definitions + +********************************************************************************/ + +// permitted RX buffer sizes: 1, 2, 4, 8, 16, 32, 64, 128 or 256 + +#ifndef TWI_RX_BUFFER_SIZE +#define TWI_RX_BUFFER_SIZE ( 16 ) +#endif +#define TWI_RX_BUFFER_MASK ( TWI_RX_BUFFER_SIZE - 1 ) + +#if ( TWI_RX_BUFFER_SIZE & TWI_RX_BUFFER_MASK ) +# error TWI RX buffer size is not a power of 2 +#endif + +// permitted TX buffer sizes: 1, 2, 4, 8, 16, 32, 64, 128 or 256 + +#ifndef TWI_TX_BUFFER_SIZE +#define TWI_TX_BUFFER_SIZE ( 16 ) +#endif +#define TWI_TX_BUFFER_MASK ( TWI_TX_BUFFER_SIZE - 1 ) + +#if ( TWI_TX_BUFFER_SIZE & TWI_TX_BUFFER_MASK ) +# error TWI TX buffer size is not a power of 2 +#endif + + + +#endif // ifndef _USI_TWI_SLAVE_H_ diff --git a/digital-driver/firmware/firmware.ino b/digital-driver/firmware/firmware.ino new file mode 100644 index 0000000..c024bbf --- /dev/null +++ b/digital-driver/firmware/firmware.ino @@ -0,0 +1,58 @@ +//////////////////////////////////////////////////////////////////////////////////// +// Digital Photoreactor Controller Slave Program Controlled by I2C // +// Run this slave program on the AtTiny85. // +//////////////////////////////////////////////////////////////////////////////////// + +#include "TinyWireS.h" // wrapper class for I2C slave routines https://github.com/rambo/TinyWire/tree/master + +#define I2C_SLAVE_ADDR 0x26 // I2C slave address (38, 0x26), + +uint8_t master_data[1]; // global buffer to store data sent from the master. +uint8_t master_bytes; // global variable to number of bytes sent from the master. + +const int LEDPin = 4; //Arduino pin 4, pin 3 on AtTiny85 pinout +const int FanPin = 1; //Arduino pin 1, pin 6 on AtTiny85 pinout +const int BlinkPin = 3; //Arduino pin 3, pin 2 on AtTiny85 pinout + +void setup() +{ + // initialize the TinyWireS and usiTwiSlave libraries + TinyWireS.begin(I2C_SLAVE_ADDR); // init I2C Slave mode + + // register the onReceive() callback function + TinyWireS.onReceive(receiveEvent); + + pinMode(LEDPin, OUTPUT); // set pin for LED PWM + pinMode(FanPin, OUTPUT); // set pin for Fan PWM + pinMode(BlinkPin, OUTPUT); // set pin to blink LED + + TCCR0B = TCCR0B & 0b11111000 | 0b001; // sets internal timer of AtTiny85 to 31250 Hz for fast PWM for controlling fan speed +} + +// Gets called when the ATtiny85 receives an I2C write slave request +void receiveEvent(uint8_t num_bytes) +{ + uint8_t i; + + // save the number of bytes sent from the master + master_bytes = num_bytes; + + // store the data from the master into the data buffer + for (i = 0; i < master_bytes; i++) + master_data[i] = TinyWireS.receive(); + + // set LED and Fan PWM duty to random byte values recieved from the master + analogWrite(FanPin, master_data[0]); + analogWrite(LEDPin, master_data[1]); + + // blink LED whenever data is successfuly recieved + digitalWrite(BlinkPin, HIGH); + delay(10); + digitalWrite(BlinkPin, LOW); + +} + +void loop() +{ + +} |