assembly instructions skeleton

6 files changed, 28 insertions, 46 deletions

diff --git a/assembly-instructions/3dp-coverat.jpg b/assembly-instructions/3dp-coverat.jpg
new file mode 100644
index 0000000..4f6a3ca
--- /dev/null
+++ b/assembly-instructions/3dp-coverat.jpg
diff --git a/assembly-instructions/assembly-coverart.jpg b/assembly-instructions/assembly-coverart.jpg
new file mode 100644
index 0000000..3712fdd
--- /dev/null
+++ b/assembly-instructions/assembly-coverart.jpg
diff --git a/assembly-instructions/electronics-coverart.jpg b/assembly-instructions/electronics-coverart.jpg
new file mode 100644
index 0000000..f3c93d3
--- /dev/null
+++ b/assembly-instructions/electronics-coverart.jpg
diff --git a/documentation/documentation.pdf b/assembly-instructions/wpr-assembly.pdf
index 855e029..2a1f19a 100644
--- a/documentation/documentation.pdf
+++ b/assembly-instructions/wpr-assembly.pdf
diff --git a/documentation/documentation.tex b/assembly-instructions/wpr-assembly.tex
index 2172f9d..d146cf9 100644
--- a/documentation/documentation.tex
+++ b/assembly-instructions/wpr-assembly.tex
@@ -1,4 +1,4 @@
-% document
+%% document
 \documentclass[11pt]{article}
 \usepackage[letterpaper, portrait, margin=0.75in]{geometry}
 \usepackage{setspace}
@@ -27,11 +27,7 @@
 \usepackage{epstopdf}
 \usepackage{xpatch}
 \usepackage{pdfpages}
-
-% "S" prefix
-\renewcommand{\theequation}{S\arabic{equation}}
-\renewcommand{\thefigure}{S\arabic{figure}}
-\renewcommand{\thetable}{S\arabic{table}}
+\usepackage{float}
 
 % each section begins new page
 \let\stdsection\section
@@ -50,40 +46,37 @@
 % bibliography
 \usepackage[numbers]{natbib}
 
-\begin{document}
-\setcounter{page}{1}
-\renewcommand{\thepage}{S\arabic{page}}
-
-\begin{center}
-	\LARGE
+% title
+\title{Wisconsin Photoreactor \\ Assembly Instructions}
+\author{
+  Philip Lampkin \\
+  Blaise J. Thompson \\
+  Samuel H. Gellman
+  }
+\date{\today}
 
-        Supporting Information
+\begin{document}
 
-        Open Source Photoreactor
+\maketitle
 
-	\normalsize
+\includegraphics[width=\textwidth]{"../coverart.jpg"}
 
-	\textit{Philip Lampkin, Blaise J. Thompson, and Samuel H. Gellman*}
+\tableofcontents
 
-	Department of Chemistry, University of Wisconsin--Madison\\
-	1101 University Ave., Madison, Wisconsin 53706
-\end{center}
+\section{Introduction}
 
-\vspace{\fill}
+Throughout this document we refer to an online repository containing source and design files.
+This repository appears at \url{https://github.com/uw-madison-chem-shops/wisconsin-photoreactor}.
+This repository contains everything including the source for this very document.
 
-*Corresponding Author \\
-\hspace*{2ex} email: gellman@chem.wisc.edu \\
+\section{3D Printed Enclosure}
 
-\pagebreak
-\renewcommand{\baselinestretch}{0.75}\normalsize
-\tableofcontents
-\renewcommand{\baselinestretch}{1.0}\normalsize
-\pagebreak
-
-\section{Introduction}
+\includegraphics[width=\textwidth]{"./3dp-coverat.jpg"}
 
 \section{Electronics}
 
+\includegraphics[width=\textwidth]{"./electronics-coverart.jpg"}
+
 \subsection{Analog}
 
 \includepdf[landscape=true]{"../analog-driver/driver.pdf"}
@@ -99,8 +92,10 @@ Consistent with Adafruit, Sparkfun, Seeed...
 
 \subsubsection{Controller}
 
-\clearpage
-\section{Mechanical Construction}
+\section{Assembly}
+
+\includegraphics[width=\textwidth]{"./assembly-coverart.jpg"}
+
 
 0.5'' standoff: RAF 4505-440-AL
 
@@ -112,9 +107,9 @@ TODO: LED PCB part number
 
 TODO: heatsink part number
 
-\begin{figure}
+\begin{figure}[H]
   \centering
-  \includegraphics[width=\textwidth/2]{"../pictures/tap-heatsink.jpg"}
+  \includegraphics[width=\textwidth/2]{"./tap-heatsink.jpg"}
   \caption{Two of the innermost holes on the extruded heatsink must be 4-40 tapped.}
 \end{figure}
 
@@ -140,6 +135,4 @@ black: ground
 
 Use 4-40 3/4'' into captured nuts
 
-\section{Efficacy}
-
 \end{document}
diff --git a/documentation/documentation.out b/documentation/documentation.out
deleted file mode 100644
index 4d51f48..0000000
--- a/documentation/documentation.out
+++ /dev/null
@@ -1,11 +0,0 @@
-\BOOKMARK [1][]{section.1}{1 Introduction}{}% 1
-\BOOKMARK [1][]{section.2}{2 Electronics}{}% 2
-\BOOKMARK [2][]{subsection.2.1}{2.1 Analog}{section.2}% 3
-\BOOKMARK [2][]{subsection.2.2}{2.2 Digital}{section.2}% 4
-\BOOKMARK [3][]{subsubsection.2.2.1}{2.2.1 Driver}{subsection.2.2}% 5
-\BOOKMARK [3][]{subsubsection.2.2.2}{2.2.2 Controller}{subsection.2.2}% 6
-\BOOKMARK [1][]{section.3}{3 Mechanical Construction}{}% 7
-\BOOKMARK [2][]{subsection.3.1}{3.1 Base}{section.3}% 8
-\BOOKMARK [3][]{subsubsection.3.1.1}{3.1.1 LED and Heatsink}{subsection.3.1}% 9
-\BOOKMARK [3][]{subsubsection.3.1.2}{3.1.2 Fan}{subsection.3.1}% 10
-\BOOKMARK [1][]{section.4}{4 Efficacy}{}% 11