diff options
Diffstat (limited to 'PCB/arduino-kicad-library')
14 files changed, 2465 insertions, 0 deletions
diff --git a/PCB/arduino-kicad-library/.gitignore b/PCB/arduino-kicad-library/.gitignore new file mode 100755 index 0000000..73cee93 --- /dev/null +++ b/PCB/arduino-kicad-library/.gitignore @@ -0,0 +1,29 @@ +# For PCBs designed using KiCad: http://www.kicad-pcb.org/ + +# Temporary files +*.000 +*.bak +*.bck +*.kicad_pcb-bak +*~ +_autosave-* +*.tmp + +# Netlist files (exported from Eeschema) +*.net + +# Autorouter files (exported from Pcbnew) +*.dsn +*.ses + +# Exported BOM files +*.xml +*.csv + +# Ignore the testproject files +testproject.sch +testproject.pro +testproject.kicad_pcb +fp-lib-table +*-cache.lib +*-rescue.lib diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_101_Shield.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_101_Shield.kicad_mod new file mode 100755 index 0000000..b6c41ba --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_101_Shield.kicad_mod @@ -0,0 +1,71 @@ +(module Arduino_101_Shield (layer F.Cu) (tedit 5A8605BA)
+ (descr https://store.arduino.cc/genuino-101)
+ (fp_text reference XA** (at 2.54 -54.356) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text value Arduino_101_Shield (at 15.494 -54.356) (layer F.Fab)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 9.525 -32.385) (end -6.35 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 9.525 -43.815) (end -6.35 -43.815) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 9.525 -43.815) (end 9.525 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -6.35 -43.815) (end -6.35 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_text user . (at 62.484 -32.004) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 11.43 -12.065) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -3.175) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end -1.905 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end 11.43 -12.065) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 0 -53.34) (end 0 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -40.64) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -38.1) (end 66.04 -40.64) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -3.81) (end 68.58 -38.1) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -1.27) (end 68.58 -3.81) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 0) (end 66.04 -1.27) (layer F.SilkS) (width 0.15))
+ (fp_line (start 64.516 -53.34) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 0) (end 66.04 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 -53.34) (end 64.516 -53.34) (layer F.SilkS) (width 0.15))
+ (pad RST2 thru_hole oval (at 63.627 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND4 thru_hole oval (at 66.167 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MOSI thru_hole oval (at 66.167 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SCK thru_hole oval (at 63.627 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V2 thru_hole oval (at 66.167 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A0 thru_hole oval (at 50.8 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad VIN thru_hole oval (at 45.72 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND3 thru_hole oval (at 43.18 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND2 thru_hole oval (at 40.64 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V1 thru_hole oval (at 38.1 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 3V3 thru_hole oval (at 35.56 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST1 thru_hole oval (at 33.02 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad IORF thru_hole oval (at 30.48 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D0 thru_hole oval (at 63.5 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D1 thru_hole oval (at 60.96 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D2 thru_hole oval (at 58.42 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D3 thru_hole oval (at 55.88 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D4 thru_hole oval (at 53.34 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D5 thru_hole oval (at 50.8 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D6 thru_hole oval (at 48.26 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D7 thru_hole oval (at 45.72 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND1 thru_hole oval (at 26.416 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D8 thru_hole oval (at 41.656 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D9 thru_hole oval (at 39.116 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D10 thru_hole oval (at 36.576 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -7.62) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -35.56) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 15.24 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 13.97 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad SCL thru_hole oval (at 18.796 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SDA thru_hole oval (at 21.336 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad AREF thru_hole oval (at 23.876 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D13 thru_hole oval (at 28.956 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D12 thru_hole oval (at 31.496 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D11 thru_hole oval (at 34.036 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad ATN thru_hole oval (at 27.94 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A1 thru_hole oval (at 53.34 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A2 thru_hole oval (at 55.88 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A3 thru_hole oval (at 58.42 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A4 thru_hole oval (at 60.96 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A5 thru_hole oval (at 63.5 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MISO thru_hole oval (at 63.627 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+)
diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Due_Shield.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Due_Shield.kicad_mod new file mode 100755 index 0000000..2cc68bd --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Due_Shield.kicad_mod @@ -0,0 +1,123 @@ +(module Arduino_Due_Shield (layer F.Cu) (tedit 5A8605C9)
+ (descr https://store.arduino.cc/arduino-due)
+ (fp_text reference XA** (at 2.54 -54.356) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text value Arduino_Due_Shield (at 15.494 -54.356) (layer F.Fab)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text user . (at 62.484 -32.004) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 11.43 -12.065) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -3.175) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end -1.905 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end 11.43 -12.065) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 0 -53.34) (end 0 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 99.06 -40.64) (end 99.06 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 101.6 -38.1) (end 99.06 -40.64) (layer F.SilkS) (width 0.15))
+ (fp_line (start 101.6 -3.81) (end 101.6 -38.1) (layer F.SilkS) (width 0.15))
+ (fp_line (start 99.06 -1.27) (end 101.6 -3.81) (layer F.SilkS) (width 0.15))
+ (fp_line (start 99.06 0) (end 99.06 -1.27) (layer F.SilkS) (width 0.15))
+ (fp_line (start 97.536 -53.34) (end 99.06 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 0) (end 99.06 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 -53.34) (end 97.536 -53.34) (layer F.SilkS) (width 0.15))
+ (pad RST2 thru_hole oval (at 63.627 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND4 thru_hole oval (at 66.167 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MOSI thru_hole oval (at 66.167 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SCK thru_hole oval (at 63.627 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V2 thru_hole oval (at 66.167 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A0 thru_hole oval (at 50.8 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad VIN thru_hole oval (at 45.72 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND3 thru_hole oval (at 43.18 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND2 thru_hole oval (at 40.64 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V1 thru_hole oval (at 38.1 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 3V3 thru_hole oval (at 35.56 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST1 thru_hole oval (at 33.02 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad IORF thru_hole oval (at 30.48 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D21 thru_hole oval (at 86.36 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D20 thru_hole oval (at 83.82 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D19 thru_hole oval (at 81.28 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D18 thru_hole oval (at 78.74 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D17 thru_hole oval (at 76.2 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D16 thru_hole oval (at 73.66 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D15 thru_hole oval (at 71.12 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D14 thru_hole oval (at 68.58 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D0 thru_hole oval (at 63.5 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D1 thru_hole oval (at 60.96 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D2 thru_hole oval (at 58.42 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D3 thru_hole oval (at 55.88 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D4 thru_hole oval (at 53.34 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D5 thru_hole oval (at 50.8 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D6 thru_hole oval (at 48.26 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D7 thru_hole oval (at 45.72 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND1 thru_hole oval (at 26.416 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D8 thru_hole oval (at 41.656 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D9 thru_hole oval (at 39.116 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D10 thru_hole oval (at 36.576 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -7.62) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -35.56) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 90.17 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 15.24 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 96.52 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 13.97 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad SCL1 thru_hole oval (at 18.796 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SDA1 thru_hole oval (at 21.336 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad AREF thru_hole oval (at 23.876 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D13 thru_hole oval (at 28.956 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D12 thru_hole oval (at 31.496 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D11 thru_hole oval (at 34.036 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" thru_hole oval (at 27.94 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A1 thru_hole oval (at 53.34 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A2 thru_hole oval (at 55.88 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A3 thru_hole oval (at 58.42 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A4 thru_hole oval (at 60.96 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A5 thru_hole oval (at 63.5 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A6 thru_hole oval (at 66.04 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A7 thru_hole oval (at 68.58 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A8 thru_hole oval (at 73.66 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A9 thru_hole oval (at 76.2 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A10 thru_hole oval (at 78.74 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A11 thru_hole oval (at 81.28 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad DAC0 thru_hole oval (at 83.82 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad DAC1 thru_hole oval (at 86.36 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad CANR thru_hole oval (at 88.9 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad CANT thru_hole oval (at 91.44 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V3 thru_hole oval (at 93.98 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V4 thru_hole oval (at 96.52 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D22 thru_hole oval (at 93.98 -48.26) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D23 thru_hole oval (at 96.52 -48.26) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D24 thru_hole oval (at 93.98 -45.72) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D25 thru_hole oval (at 96.52 -45.72) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D26 thru_hole oval (at 93.98 -43.18) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D27 thru_hole oval (at 96.52 -43.18) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D28 thru_hole oval (at 93.98 -40.64) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D29 thru_hole oval (at 96.52 -40.64) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D30 thru_hole oval (at 93.98 -38.1) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D31 thru_hole oval (at 96.52 -38.1) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D32 thru_hole oval (at 93.98 -35.56) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D33 thru_hole oval (at 96.52 -35.56) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D34 thru_hole oval (at 93.98 -33.02) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D35 thru_hole oval (at 96.52 -33.02) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D36 thru_hole oval (at 93.98 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D37 thru_hole oval (at 96.52 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D38 thru_hole oval (at 93.98 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D39 thru_hole oval (at 96.52 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D40 thru_hole oval (at 93.98 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D41 thru_hole oval (at 96.52 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D42 thru_hole oval (at 93.98 -22.86) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D43 thru_hole oval (at 96.52 -22.86) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D44 thru_hole oval (at 93.98 -20.32) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D45 thru_hole oval (at 96.52 -20.32) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D46 thru_hole oval (at 93.98 -17.78) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D47 thru_hole oval (at 96.52 -17.78) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D48 thru_hole oval (at 93.98 -15.24) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D49 thru_hole oval (at 96.52 -15.24) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D50 thru_hole oval (at 93.98 -12.7) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D51 thru_hole oval (at 96.52 -12.7) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D52 thru_hole oval (at 93.98 -10.16) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D53 thru_hole oval (at 96.52 -10.16) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND5 thru_hole oval (at 93.98 -7.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND6 thru_hole oval (at 96.52 -7.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MISO thru_hole oval (at 63.627 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+)
diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Leonardo_Shield.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Leonardo_Shield.kicad_mod new file mode 100755 index 0000000..a71455a --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Leonardo_Shield.kicad_mod @@ -0,0 +1,67 @@ +(module Arduino_Leonardo_Shield (layer F.Cu) (tedit 5A8605E1)
+ (descr https://store.arduino.cc/arduino-leonardo-with-headers)
+ (fp_text reference XA** (at 2.54 -54.356) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text value Arduino_Leonardo_Shield (at 15.494 -54.356) (layer F.Fab)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text user . (at 62.484 -32.004) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 11.43 -12.065) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -3.175) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end -1.905 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end 11.43 -12.065) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 0 -53.34) (end 0 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -40.64) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -38.1) (end 66.04 -40.64) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -3.81) (end 68.58 -38.1) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -1.27) (end 68.58 -3.81) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 0) (end 66.04 -1.27) (layer F.SilkS) (width 0.15))
+ (fp_line (start 64.516 -53.34) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 0) (end 66.04 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 -53.34) (end 64.516 -53.34) (layer F.SilkS) (width 0.15))
+ (pad RST2 thru_hole oval (at 63.627 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND4 thru_hole oval (at 66.167 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MOSI thru_hole oval (at 66.167 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SCK thru_hole oval (at 63.627 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V2 thru_hole oval (at 66.167 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A0 thru_hole oval (at 50.8 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad VIN thru_hole oval (at 45.72 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND3 thru_hole oval (at 43.18 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND2 thru_hole oval (at 40.64 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V1 thru_hole oval (at 38.1 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 3V3 thru_hole oval (at 35.56 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST1 thru_hole oval (at 33.02 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad IORF thru_hole oval (at 30.48 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D0 thru_hole oval (at 63.5 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D1 thru_hole oval (at 60.96 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D2 thru_hole oval (at 58.42 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D3 thru_hole oval (at 55.88 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D4 thru_hole oval (at 53.34 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D5 thru_hole oval (at 50.8 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D6 thru_hole oval (at 48.26 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D7 thru_hole oval (at 45.72 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND1 thru_hole oval (at 26.416 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D8 thru_hole oval (at 41.656 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D9 thru_hole oval (at 39.116 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D10 thru_hole oval (at 36.576 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -7.62) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -35.56) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 15.24 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 13.97 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad SCL thru_hole oval (at 18.796 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SDA thru_hole oval (at 21.336 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad AREF thru_hole oval (at 23.876 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D13 thru_hole oval (at 28.956 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D12 thru_hole oval (at 31.496 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D11 thru_hole oval (at 34.036 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" thru_hole oval (at 27.94 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A1 thru_hole oval (at 53.34 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A2 thru_hole oval (at 55.88 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A3 thru_hole oval (at 58.42 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A4 thru_hole oval (at 60.96 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A5 thru_hole oval (at 63.5 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MISO thru_hole oval (at 63.627 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+)
diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Mega2560_Shield.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Mega2560_Shield.kicad_mod new file mode 100755 index 0000000..854cb38 --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Mega2560_Shield.kicad_mod @@ -0,0 +1,127 @@ +(module Arduino_Mega2560_Shield (layer F.Cu) (tedit 5A8605D3)
+ (descr https://store.arduino.cc/arduino-mega-2560-rev3)
+ (fp_text reference XA** (at 2.54 -54.356) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text value Arduino_Mega2560_Shield (at 15.494 -54.356) (layer F.Fab)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 9.525 -32.385) (end -6.35 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 9.525 -43.815) (end -6.35 -43.815) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 9.525 -43.815) (end 9.525 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -6.35 -43.815) (end -6.35 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_text user . (at 62.484 -32.004) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 11.43 -12.065) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -3.175) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end -1.905 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end 11.43 -12.065) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 0 -53.34) (end 0 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 99.06 -40.64) (end 99.06 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 101.6 -38.1) (end 99.06 -40.64) (layer F.SilkS) (width 0.15))
+ (fp_line (start 101.6 -3.81) (end 101.6 -38.1) (layer F.SilkS) (width 0.15))
+ (fp_line (start 99.06 -1.27) (end 101.6 -3.81) (layer F.SilkS) (width 0.15))
+ (fp_line (start 99.06 0) (end 99.06 -1.27) (layer F.SilkS) (width 0.15))
+ (fp_line (start 97.536 -53.34) (end 99.06 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 0) (end 99.06 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 -53.34) (end 97.536 -53.34) (layer F.SilkS) (width 0.15))
+ (pad RST2 thru_hole oval (at 63.627 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND4 thru_hole oval (at 66.167 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MOSI thru_hole oval (at 66.167 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SCK thru_hole oval (at 63.627 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V2 thru_hole oval (at 66.167 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A0 thru_hole oval (at 50.8 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad VIN thru_hole oval (at 45.72 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND3 thru_hole oval (at 43.18 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND2 thru_hole oval (at 40.64 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V1 thru_hole oval (at 38.1 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 3V3 thru_hole oval (at 35.56 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST1 thru_hole oval (at 33.02 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad IORF thru_hole oval (at 30.48 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D21 thru_hole oval (at 86.36 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D20 thru_hole oval (at 83.82 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D19 thru_hole oval (at 81.28 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D18 thru_hole oval (at 78.74 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D17 thru_hole oval (at 76.2 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D16 thru_hole oval (at 73.66 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D15 thru_hole oval (at 71.12 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D14 thru_hole oval (at 68.58 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D0 thru_hole oval (at 63.5 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D1 thru_hole oval (at 60.96 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D2 thru_hole oval (at 58.42 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D3 thru_hole oval (at 55.88 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D4 thru_hole oval (at 53.34 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D5 thru_hole oval (at 50.8 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D6 thru_hole oval (at 48.26 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D7 thru_hole oval (at 45.72 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND1 thru_hole oval (at 26.416 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D8 thru_hole oval (at 41.656 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D9 thru_hole oval (at 39.116 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D10 thru_hole oval (at 36.576 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -7.62) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -35.56) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 90.17 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 15.24 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 96.52 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 13.97 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad SCL thru_hole oval (at 18.796 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SDA thru_hole oval (at 21.336 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad AREF thru_hole oval (at 23.876 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D13 thru_hole oval (at 28.956 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D12 thru_hole oval (at 31.496 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D11 thru_hole oval (at 34.036 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" thru_hole oval (at 27.94 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A1 thru_hole oval (at 53.34 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A2 thru_hole oval (at 55.88 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A3 thru_hole oval (at 58.42 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A4 thru_hole oval (at 60.96 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A5 thru_hole oval (at 63.5 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A6 thru_hole oval (at 66.04 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A7 thru_hole oval (at 68.58 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A8 thru_hole oval (at 73.66 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A9 thru_hole oval (at 76.2 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A10 thru_hole oval (at 78.74 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A11 thru_hole oval (at 81.28 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A12 thru_hole oval (at 83.82 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A13 thru_hole oval (at 86.36 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A14 thru_hole oval (at 88.9 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A15 thru_hole oval (at 91.44 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V3 thru_hole oval (at 93.98 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V4 thru_hole oval (at 96.52 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D22 thru_hole oval (at 93.98 -48.26) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D23 thru_hole oval (at 96.52 -48.26) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D24 thru_hole oval (at 93.98 -45.72) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D25 thru_hole oval (at 96.52 -45.72) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D26 thru_hole oval (at 93.98 -43.18) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D27 thru_hole oval (at 96.52 -43.18) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D28 thru_hole oval (at 93.98 -40.64) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D29 thru_hole oval (at 96.52 -40.64) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D30 thru_hole oval (at 93.98 -38.1) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D31 thru_hole oval (at 96.52 -38.1) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D32 thru_hole oval (at 93.98 -35.56) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D33 thru_hole oval (at 96.52 -35.56) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D34 thru_hole oval (at 93.98 -33.02) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D35 thru_hole oval (at 96.52 -33.02) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D36 thru_hole oval (at 93.98 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D37 thru_hole oval (at 96.52 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D38 thru_hole oval (at 93.98 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D39 thru_hole oval (at 96.52 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D40 thru_hole oval (at 93.98 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D41 thru_hole oval (at 96.52 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D42 thru_hole oval (at 93.98 -22.86) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D43 thru_hole oval (at 96.52 -22.86) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D44 thru_hole oval (at 93.98 -20.32) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D45 thru_hole oval (at 96.52 -20.32) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D46 thru_hole oval (at 93.98 -17.78) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D47 thru_hole oval (at 96.52 -17.78) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D48 thru_hole oval (at 93.98 -15.24) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D49 thru_hole oval (at 96.52 -15.24) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D50 thru_hole oval (at 93.98 -12.7) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D51 thru_hole oval (at 96.52 -12.7) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D52 thru_hole oval (at 93.98 -10.16) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D53 thru_hole oval (at 96.52 -10.16) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND5 thru_hole oval (at 93.98 -7.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND6 thru_hole oval (at 96.52 -7.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MISO thru_hole oval (at 63.627 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+)
diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Micro_Socket.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Micro_Socket.kicad_mod new file mode 100755 index 0000000..f9c7b28 --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Micro_Socket.kicad_mod @@ -0,0 +1,64 @@ +(module Arduino_Micro_Socket (layer F.Cu) (tedit 5A860566)
+ (descr https://store.arduino.cc/arduino-micro)
+ (fp_text reference XA** (at 2.54 -19.05) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text value Arduino_Micro_Socket (at 15.494 -19.05) (layer F.Fab)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text user 3.3V (at 6.46 -2.794) (layer F.SilkS)
+ (effects (font (size 0.5 0.5) (thickness 0.075)))
+ )
+ (fp_text user USB (at -1.016 -9.017 90) (layer F.SilkS)
+ (effects (font (size 0.5 0.5) (thickness 0.075)))
+ )
+ (fp_line (start -2.032 0.254) (end -2.286 0.254) (layer F.CrtYd) (width 0.15))
+ (fp_line (start -2.286 0.254) (end -2.286 -17.526) (layer F.CrtYd) (width 0.15))
+ (fp_line (start -2.286 -17.526) (end -2.286 -18.288) (layer F.CrtYd) (width 0.15))
+ (fp_line (start -2.286 -18.288) (end 48.768 -18.288) (layer F.CrtYd) (width 0.15))
+ (fp_line (start 48.768 -18.288) (end 48.768 0.254) (layer F.CrtYd) (width 0.15))
+ (fp_line (start 48.768 0.254) (end -2.032 0.254) (layer F.CrtYd) (width 0.15))
+ (fp_line (start -2 -18.034) (end -2 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 48.48 -18) (end 48.48 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start -2 -18.034) (end 48.48 -18.034) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 -18) (end 0 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start -2 0) (end 48.48 0) (layer F.SilkS) (width 0.15))
+ (pad "" np_thru_hole circle (at 47.1 -16.62) (size 1.016 1.016) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 1.38 -16.62) (size 1.016 1.016) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 47.1 -1.38) (size 1.016 1.016) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" thru_hole oval (at 26.78 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST2 thru_hole oval (at 34.4 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MOSI thru_hole rect (at 44.56 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SCK thru_hole oval (at 44.56 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A0 thru_hole oval (at 11.54 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad VIN thru_hole oval (at 39.48 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND2 thru_hole oval (at 31.86 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND1 thru_hole oval (at 36.94 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V thru_hole oval (at 31.86 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 3V3 thru_hole oval (at 6.46 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST1 thru_hole oval (at 34.4 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SS thru_hole oval (at 42.02 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D0 thru_hole oval (at 36.94 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D1 thru_hole oval (at 39.48 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D2 thru_hole oval (at 29.32 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D3 thru_hole oval (at 26.78 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D4 thru_hole oval (at 24.24 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D5 thru_hole oval (at 21.7 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D6 thru_hole oval (at 19.16 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D7 thru_hole oval (at 16.62 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D8 thru_hole oval (at 14.08 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D9 thru_hole oval (at 11.54 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D10 thru_hole oval (at 9 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 1.38 -1.38) (size 1.016 1.016) (drill 1.016) (layers *.Cu *.Mask))
+ (pad AREF thru_hole oval (at 9 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D13 thru_hole oval (at 3.92 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D12 thru_hole oval (at 3.92 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D11 thru_hole oval (at 6.46 -16.62) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" thru_hole oval (at 29.32 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A1 thru_hole oval (at 14.08 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A2 thru_hole oval (at 16.62 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A3 thru_hole oval (at 19.16 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A4 thru_hole oval (at 21.7 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A5 thru_hole oval (at 24.24 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MISO thru_hole oval (at 42.02 -1.38) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+)
diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Mini_Socket.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Mini_Socket.kicad_mod new file mode 100755 index 0000000..b6852c5 --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Mini_Socket.kicad_mod @@ -0,0 +1,55 @@ +(module Arduino_Mini_Socket (layer F.Cu) (tedit 5A87789E) + (descr https://store.arduino.cc/arduino-mini-05) + (fp_text reference XA** (at 2.54 -31.496) (layer F.SilkS) + (effects (font (size 1 1) (thickness 0.15))) + ) + (fp_text value Arduino_Mini_Socket (at 8.89 -15.24 90) (layer F.Fab) + (effects (font (size 1 1) (thickness 0.15))) + ) + (fp_line (start -0.254 0.254) (end -0.254 -30.734) (layer F.CrtYd) (width 0.15)) + (fp_line (start -0.254 -30.734) (end 18.034 -30.734) (layer F.CrtYd) (width 0.15)) + (fp_line (start 18.034 -30.734) (end 18.034 0.254) (layer F.CrtYd) (width 0.15)) + (fp_line (start 18.034 0.254) (end -0.254 0.254) (layer F.CrtYd) (width 0.15)) + (fp_text user RST (at 14.986 -24.13 90) (layer F.SilkS) + (effects (font (size 0.5 0.5) (thickness 0.075))) + ) + (fp_line (start 0 0) (end 0 -30.48) (layer F.SilkS) (width 0.15)) + (fp_line (start 0 -30.48) (end 17.78 -30.48) (layer F.SilkS) (width 0.15)) + (fp_line (start 17.78 -30.48) (end 17.78 0) (layer F.SilkS) (width 0.15)) + (fp_line (start 17.78 0) (end 0 0) (layer F.SilkS) (width 0.15)) + (pad GND3 thru_hole circle (at 13.97 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad 5V2 thru_hole circle (at 11.43 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad RX thru_hole circle (at 8.89 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad TX thru_hole circle (at 6.35 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad L2 thru_hole rect (at 3.81 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D11 thru_hole circle (at 16.51 -3.81) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D12 thru_hole circle (at 16.51 -6.35) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D13 thru_hole circle (at 16.51 -8.89) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A0 thru_hole circle (at 16.51 -11.43) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A1 thru_hole circle (at 16.51 -13.97) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A2 thru_hole circle (at 16.51 -16.51) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A3 thru_hole circle (at 16.51 -19.05) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad 5V1 thru_hole circle (at 16.51 -21.59) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad RST2 thru_hole circle (at 16.51 -24.13) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad GND2 thru_hole circle (at 16.51 -26.67) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad VIN thru_hole rect (at 16.51 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D10 thru_hole circle (at 16.51 -1.27) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad GND4 thru_hole rect (at 13.97 -1.27) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad 5V3 thru_hole circle (at 11.43 -1.27) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A6 thru_hole circle (at 3.81 -3.81) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A7 thru_hole circle (at 6.35 -3.81) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A5 thru_hole circle (at 6.35 -1.27) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D1 thru_hole rect (at 1.27 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D0 thru_hole circle (at 1.27 -26.67) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad L0 thru_hole circle (at 1.27 -24.13) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad L1 thru_hole circle (at 1.27 -21.59) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D2 thru_hole circle (at 1.27 -19.05) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D3 thru_hole circle (at 1.27 -16.51) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D4 thru_hole circle (at 1.27 -13.97) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D5 thru_hole circle (at 1.27 -11.43) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D6 thru_hole circle (at 1.27 -8.89) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D7 thru_hole circle (at 1.27 -6.35) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D8 thru_hole circle (at 1.27 -3.81) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A4 thru_hole rect (at 3.81 -1.27) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D9 thru_hole circle (at 1.27 -1.27) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) +) diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Nano_Socket.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Nano_Socket.kicad_mod new file mode 100755 index 0000000..55c5b83 --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Nano_Socket.kicad_mod @@ -0,0 +1,71 @@ +(module Arduino_Nano_Socket (layer F.Cu) (tedit 5A860395) + (descr https://store.arduino.cc/arduino-nano) + (fp_text reference XA** (at 6.604 1.016) (layer F.SilkS) + (effects (font (size 1 1) (thickness 0.15))) + ) + (fp_text value Arduino_Nano_Socket (at 0 -21.082 90) (layer F.Fab) + (effects (font (size 1 1) (thickness 0.15))) + ) + (fp_text user USB (at 0 0.635) (layer F.SilkS) + (effects (font (size 0.5 0.5) (thickness 0.075))) + ) + (fp_text user 3.3V (at 6.35 -6.35 90) (layer F.SilkS) + (effects (font (size 0.5 0.5) (thickness 0.075))) + ) + (fp_text user ICSP (at 0 -40.64) (layer F.Fab) + (effects (font (size 1 1) (thickness 0.15))) + ) + (fp_circle (center 0 -39.37) (end 0.508 -39.37) (layer F.Fab) (width 0.15)) + (fp_circle (center 2.54 -39.37) (end 3.048 -39.37) (layer F.Fab) (width 0.15)) + (fp_circle (center 2.54 -41.91) (end 3.048 -41.91) (layer F.Fab) (width 0.15)) + (fp_circle (center -2.54 -39.37) (end -2.032 -39.37) (layer F.Fab) (width 0.15)) + (fp_circle (center 0 -41.91) (end 0.508 -41.91) (layer F.Fab) (width 0.15)) + (fp_circle (center -2.54 -41.91) (end -2.032 -41.91) (layer F.Fab) (width 0.15)) + (fp_line (start -3.302 1.778) (end -9.144 1.778) (layer F.CrtYd) (width 0.15)) + (fp_line (start -9.144 1.778) (end -9.144 -22.606) (layer F.CrtYd) (width 0.15)) + (fp_line (start -9.144 -22.606) (end -9.144 -43.434) (layer F.CrtYd) (width 0.15)) + (fp_line (start -9.144 -43.434) (end 9.144 -43.434) (layer F.CrtYd) (width 0.15)) + (fp_line (start 9.144 -43.434) (end 9.144 1.778) (layer F.CrtYd) (width 0.15)) + (fp_line (start 9.144 1.778) (end -3.302 1.778) (layer F.CrtYd) (width 0.15)) + (fp_line (start -4.064 0) (end -4.064 1.45) (layer F.SilkS) (width 0.15)) + (fp_line (start -4.064 1.45) (end 4.064 1.45) (layer F.SilkS) (width 0.15)) + (fp_line (start 4.064 1.45) (end 4.064 0) (layer F.SilkS) (width 0.15)) + (fp_line (start -8.89 -43.18) (end 8.89 -43.18) (layer F.SilkS) (width 0.15)) + (fp_line (start -8.89 0) (end 8.89 0) (layer F.SilkS) (width 0.15)) + (fp_line (start 8.89 -43.18) (end 8.89 0) (layer F.SilkS) (width 0.15)) + (fp_line (start -8.89 -43.18) (end -8.89 0) (layer F.SilkS) (width 0.15)) + (pad VIN thru_hole circle (at 7.62 -39.37) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad GND2 thru_hole circle (at 7.62 -36.83) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad RST2 thru_hole circle (at 7.62 -34.29) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad 5V thru_hole circle (at 7.62 -31.75) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A7 thru_hole circle (at 7.62 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A6 thru_hole circle (at 7.62 -26.67) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A5 thru_hole circle (at 7.62 -24.13) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A4 thru_hole circle (at 7.62 -21.59) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A3 thru_hole circle (at 7.62 -19.05) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A2 thru_hole circle (at 7.62 -16.51) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A1 thru_hole circle (at 7.62 -13.97) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad A0 thru_hole circle (at 7.62 -11.43) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad AREF thru_hole circle (at 7.62 -8.89) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad 3V3 thru_hole circle (at 7.62 -6.35) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D13 thru_hole circle (at 7.62 -3.81) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D12 thru_hole circle (at -7.62 -3.81) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D11 thru_hole circle (at -7.62 -6.35) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D10 thru_hole circle (at -7.62 -8.89) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D9 thru_hole circle (at -7.62 -11.43) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D8 thru_hole circle (at -7.62 -13.97) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D7 thru_hole circle (at -7.62 -16.51) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D6 thru_hole circle (at -7.62 -19.05) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D5 thru_hole circle (at -7.62 -21.59) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D4 thru_hole circle (at -7.62 -24.13) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D3 thru_hole circle (at -7.62 -26.67) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D2 thru_hole circle (at -7.62 -29.21) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad GND1 thru_hole circle (at -7.62 -31.75) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad RST1 thru_hole circle (at -7.62 -34.29) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D0 thru_hole circle (at -7.62 -36.83) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad D1 thru_hole rect (at -7.62 -39.37) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask)) + (pad "" np_thru_hole circle (at -7.62 -41.91) (size 1.85 1.85) (drill 1.85) (layers *.Cu *.Mask)) + (pad "" np_thru_hole circle (at 7.62 -41.91) (size 1.85 1.85) (drill 1.85) (layers *.Cu *.Mask)) + (pad "" np_thru_hole circle (at -7.62 -1.27) (size 1.85 1.85) (drill 1.85) (layers *.Cu *.Mask)) + (pad "" np_thru_hole circle (at 7.62 -1.27) (size 1.85 1.85) (drill 1.85) (layers *.Cu *.Mask)) +) diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Uno_Shield.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Uno_Shield.kicad_mod new file mode 100755 index 0000000..965014b --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Uno_Shield.kicad_mod @@ -0,0 +1,71 @@ +(module Arduino_Uno_Shield (layer F.Cu) (tedit 5A8605EC)
+ (descr https://store.arduino.cc/arduino-uno-rev3)
+ (fp_text reference XA** (at 2.54 -54.356) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text value Arduino_Uno_Shield (at 15.494 -54.356) (layer F.Fab)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 9.525 -32.385) (end -6.35 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 9.525 -43.815) (end -6.35 -43.815) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 9.525 -43.815) (end 9.525 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -6.35 -43.815) (end -6.35 -32.385) (layer B.CrtYd) (width 0.15))
+ (fp_text user . (at 62.484 -32.004) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 11.43 -12.065) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -3.175) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end -1.905 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end 11.43 -12.065) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 0 -53.34) (end 0 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -40.64) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -38.1) (end 66.04 -40.64) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -3.81) (end 68.58 -38.1) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -1.27) (end 68.58 -3.81) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 0) (end 66.04 -1.27) (layer F.SilkS) (width 0.15))
+ (fp_line (start 64.516 -53.34) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 0) (end 66.04 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 -53.34) (end 64.516 -53.34) (layer F.SilkS) (width 0.15))
+ (pad RST2 thru_hole oval (at 63.627 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND4 thru_hole oval (at 66.167 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MOSI thru_hole oval (at 66.167 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SCK thru_hole oval (at 63.627 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V2 thru_hole oval (at 66.167 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A0 thru_hole oval (at 50.8 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad VIN thru_hole oval (at 45.72 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND3 thru_hole oval (at 43.18 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND2 thru_hole oval (at 40.64 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V1 thru_hole oval (at 38.1 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 3V3 thru_hole oval (at 35.56 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST1 thru_hole oval (at 33.02 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad IORF thru_hole oval (at 30.48 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D0 thru_hole oval (at 63.5 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D1 thru_hole oval (at 60.96 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D2 thru_hole oval (at 58.42 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D3 thru_hole oval (at 55.88 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D4 thru_hole oval (at 53.34 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D5 thru_hole oval (at 50.8 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D6 thru_hole oval (at 48.26 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D7 thru_hole oval (at 45.72 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND1 thru_hole oval (at 26.416 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D8 thru_hole oval (at 41.656 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D9 thru_hole oval (at 39.116 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D10 thru_hole oval (at 36.576 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -7.62) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -35.56) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 15.24 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 13.97 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad SCL thru_hole oval (at 18.796 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SDA thru_hole oval (at 21.336 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad AREF thru_hole oval (at 23.876 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D13 thru_hole oval (at 28.956 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D12 thru_hole oval (at 31.496 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D11 thru_hole oval (at 34.036 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" thru_hole oval (at 27.94 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A1 thru_hole oval (at 53.34 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A2 thru_hole oval (at 55.88 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A3 thru_hole oval (at 58.42 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A4 thru_hole oval (at 60.96 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A5 thru_hole oval (at 63.5 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MISO thru_hole oval (at 63.627 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+)
diff --git a/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Zero_Shield.kicad_mod b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Zero_Shield.kicad_mod new file mode 100755 index 0000000..7579085 --- /dev/null +++ b/PCB/arduino-kicad-library/Arduino.pretty/Arduino_Zero_Shield.kicad_mod @@ -0,0 +1,67 @@ +(module Arduino_Zero_Shield (layer F.Cu) (tedit 5A8605F5)
+ (descr https://store.arduino.cc/genuino-zero)
+ (fp_text reference XA** (at 2.54 -54.356) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text value Arduino_Zero_Shield (at 15.494 -54.356) (layer F.Fab)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_text user . (at 62.484 -32.004) (layer F.SilkS)
+ (effects (font (size 1 1) (thickness 0.15)))
+ )
+ (fp_line (start 11.43 -12.065) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -3.175) (end 11.43 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end -1.905 -3.175) (layer B.CrtYd) (width 0.15))
+ (fp_line (start -1.905 -12.065) (end 11.43 -12.065) (layer B.CrtYd) (width 0.15))
+ (fp_line (start 0 -53.34) (end 0 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -40.64) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -38.1) (end 66.04 -40.64) (layer F.SilkS) (width 0.15))
+ (fp_line (start 68.58 -3.81) (end 68.58 -38.1) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 -1.27) (end 68.58 -3.81) (layer F.SilkS) (width 0.15))
+ (fp_line (start 66.04 0) (end 66.04 -1.27) (layer F.SilkS) (width 0.15))
+ (fp_line (start 64.516 -53.34) (end 66.04 -51.816) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 0) (end 66.04 0) (layer F.SilkS) (width 0.15))
+ (fp_line (start 0 -53.34) (end 64.516 -53.34) (layer F.SilkS) (width 0.15))
+ (pad RST2 thru_hole oval (at 63.627 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND4 thru_hole oval (at 66.167 -25.4) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MOSI thru_hole oval (at 66.167 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SCK thru_hole oval (at 63.627 -27.94) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V2 thru_hole oval (at 66.167 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A0 thru_hole oval (at 50.8 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad VIN thru_hole oval (at 45.72 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND3 thru_hole oval (at 43.18 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND2 thru_hole oval (at 40.64 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 5V1 thru_hole oval (at 38.1 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad 3V3 thru_hole oval (at 35.56 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad RST1 thru_hole oval (at 33.02 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad IORF thru_hole oval (at 30.48 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D0 thru_hole oval (at 63.5 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D1 thru_hole oval (at 60.96 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D2 thru_hole oval (at 58.42 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D3 thru_hole oval (at 55.88 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D4 thru_hole oval (at 53.34 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D5 thru_hole oval (at 50.8 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D6 thru_hole oval (at 48.26 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D7 thru_hole oval (at 45.72 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad GND1 thru_hole oval (at 26.416 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D8 thru_hole oval (at 41.656 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D9 thru_hole oval (at 39.116 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D10 thru_hole oval (at 36.576 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -7.62) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 66.04 -35.56) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 15.24 -50.8) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad "" np_thru_hole circle (at 13.97 -2.54) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+ (pad SCL thru_hole oval (at 18.796 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad SDA thru_hole oval (at 21.336 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad AREF thru_hole oval (at 23.876 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D13 thru_hole oval (at 28.956 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D12 thru_hole oval (at 31.496 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad D11 thru_hole oval (at 34.036 -50.8) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad ATN thru_hole oval (at 27.94 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A1 thru_hole oval (at 53.34 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A2 thru_hole oval (at 55.88 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A3 thru_hole oval (at 58.42 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A4 thru_hole oval (at 60.96 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad A5 thru_hole oval (at 63.5 -2.54) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+ (pad MISO thru_hole oval (at 63.627 -30.48) (size 1.7272 1.7272) (drill 1.016) (layers *.Cu *.Mask))
+)
diff --git a/PCB/arduino-kicad-library/LICENSE.txt b/PCB/arduino-kicad-library/LICENSE.txt new file mode 100755 index 0000000..19e3071 --- /dev/null +++ b/PCB/arduino-kicad-library/LICENSE.txt @@ -0,0 +1,504 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +(This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.) + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + {description} + Copyright (C) {year} {fullname} + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 + USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random + Hacker. + + {signature of Ty Coon}, 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/PCB/arduino-kicad-library/README.md b/PCB/arduino-kicad-library/README.md new file mode 100755 index 0000000..cd76c14 --- /dev/null +++ b/PCB/arduino-kicad-library/README.md @@ -0,0 +1,64 @@ +# Arduino KiCad Library +*Version 1.4.1* + +Library of schematic components and footprints of common Arduino boards for KiCad. + +Currently included are: +- Arduino 101 Shield +- Arduino Due Shield +- Arduino Leonardo Shied +- Arduino M0 Shield +- Arduino M0 Pro Shield +- Arduino Mega 2560 Shield +- Arduino Micro Socket +- Arduino Mini Socket +- Arduino Nano Socket +- Arduino Uno Shield +- Arduino Zero Shield + +Shield means the Arduino is designed to plug in from beneath your PCB; socket means it is designed to plug in from above. + +## Comments, Requests, Bugs & Contributions +All are welcome. +Please file an Issue or Pull Request at https://github.com/Alarm-Siren/arduino-kicad-library + +## License +Copyright 2017-2018, Nicholas Parks Young. All Rights Reserved. +This library is licensed under the GNU LGPL v2.1, which can be found in file LICENSE.txt. + +## Donations + +If you've found this library useful and you'd like to make a donation towards its continued upkeep, click the button below: + +[](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=UX25HM4CZFFWW) + +## Library Setup +To add this library to your KiCad Project, do the following steps: +1. Copy the source files to your Project. Make sure that the Arduino.pretty folder structure is preserved. +2. In Eeschema (the schematic editor of KiCad) go to Preferences -> Component Libraries. Click the "Add" button next to "Component library files". +3. Navigate to your project folder, select "arduino.lib" and click "open". +4. You may wish to adjust the newly added arduino schematic library to be near the top of the load order using the "Up" and "Down" buttons, but this is optional and is only relevant if you have other libraries that use the same names for parts. +5. OK out and exit Eeschema. Open Pcbnew (the PCB editor of KiCad) go to Preferences -> Footprint Libraries Manager. +6. Select the "Project Specific Libraries" tab and then click "Append Library". +7. In the new line of the table, set Library Path to "$(KIPRJMOD)\Arduino.pretty" on Windows or "$(KIPRJMOD)/Arduino.pretty" on Linux/Mac, and ensure Plugin Type is "KiCad". Options and Description can be left blank. You should set Nickname to something descriptive - like "Arduino" for example! +8. All done: you are now ready to use these schematic components and footprints! + +## A note about Power and Reset pins + +### Power +On the Arduino Platform, it is not possible to categorically state that the power pins are "power inputs" or "power outputs", as that depends on exactly how you're using the Arduino. For example, if you're powering the Arduino from USB then GND, +3.3V and +5V would be power outputs and VIN would do nothing, whereas if you're powering the Arduino from a battery via your Shield then VIN and GND are power inputs whilst +5V and +3.3V are power outputs. There are other, more esoteric possibilities too. + +Regardless of the above, I needed to make a decision about what electrical type to apply to these pins. I could use something like Passive or Unspecified, but then KiCad's Electrical Rules Checker (ERC) tool would not be effective in catching errors on these pins at all, whilst using Power Output means it objects to you joining pins together (for example, joining all the GND pins into a common net) even when that's OK in some situations. + +Therefore, I have decided to use Power Input as this presents the least issues. This means if you're actually using any of the power pins as Power Outputs in your schematic, by default the ERC will complain that the relevant nets are undriven. To fix this you will need to add the special "PWR_FLAG" component to the affected net. + +### Reset +Reset pins on the Arduino Platform have interesting electrical characteristics, which mean that no KiCad electrical type exactly matches their functionality. I settled on Open Collector as the nearest candidate, but unlike a true Open Collector pin on an integrated circuit, the reset pins on the Arduino Platform have an internal weak pull-up, and the reset button that can strongly pull low, so your circuit needs to be able to cope with all these situations. + +In other words, if you use the reset pin as an input to your shield then you do not need to add a pull-up (doing so will actually make it less responsive if not break it); conversely if you want to drive the reset line in order to reset the Arduino you need to ensure that you only ever pull it low - if you pull it high at the same time as an unwitting user hits the physical reset button, you've created a short between power and ground which will likely fry whatever chip is on your shield. + +### TL;DR: + +*The KiCad ERC cannot catch all the possible electrical errors on your schematic as it doesn't natively support the reset and power pins' electrical types. Even if the ERC says its OK, double check it manually.* + +*If the ERC says that your power pins are undriven, first manually check they are being driven. If they are driven, then add a "PWR_FLAG" component to the net to make the error go away.* diff --git a/PCB/arduino-kicad-library/arduino.dcm b/PCB/arduino-kicad-library/arduino.dcm new file mode 100755 index 0000000..c04da84 --- /dev/null +++ b/PCB/arduino-kicad-library/arduino.dcm @@ -0,0 +1,93 @@ +EESchema-DOCLIB Version 2.0
+#
+$CMP Arduino_101_Shield
+D Shield for Arduino 101
+K Arduino MPU Shield
+F https://store.arduino.cc/genuino-101
+$ENDCMP
+#
+$CMP Arduino_Due_Shield
+D Shield for Arduino Due
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-due
+$ENDCMP
+#
+$CMP Arduino_Leonardo_Shield
+D Shield for Arduino Leonardo
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-leonardo-with-headers
+$ENDCMP
+#
+$CMP Arduino_M0_Pro_Shield
+D Shield for Arduino M0 Pro
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-m0-pro
+$ENDCMP
+#
+$CMP Arduino_M0_Shield
+D Shield for Arduino M0
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-m0
+$ENDCMP
+#
+$CMP Arduino_Mega2560_Shield
+D Shield for Arduino Mega 2560
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-mega-2560-rev3
+$ENDCMP
+#
+$CMP Arduino_Micro_Socket
+D Socket for Arduino Micro
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-micro
+$ENDCMP
+#
+$CMP Arduino_Mini_01_Socket
+D Socket for Arduino Mini 01
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-mini-05
+$ENDCMP
+#
+$CMP Arduino_Mini_02_Socket
+D Socket for Arduino Mini 02
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-mini-05
+$ENDCMP
+#
+$CMP Arduino_Mini_03_Socket
+D Socket for Arduino Mini 03
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-mini-05
+$ENDCMP
+#
+$CMP Arduino_Mini_04_Socket
+D Socket for Arduino Mini 04
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-mini-05
+$ENDCMP
+#
+$CMP Arduino_Mini_05_Socket
+D Socket for Arduino Mini 05
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-mini-05
+$ENDCMP
+#
+$CMP Arduino_Nano_Socket
+D Socket for Arduino Nano
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-nano
+$ENDCMP
+#
+$CMP Arduino_Uno_Shield
+D Shield for Arduino Uno
+K Arduino MPU Shield
+F https://store.arduino.cc/arduino-uno-rev3
+$ENDCMP
+#
+$CMP Arduino_Zero_Shield
+D Shield for Arduino Zero
+K Arduino MPU Shield
+F https://store.arduino.cc/genuino-zero
+$ENDCMP
+#
+#End Doc Library
diff --git a/PCB/arduino-kicad-library/arduino.lib b/PCB/arduino-kicad-library/arduino.lib new file mode 100755 index 0000000..cdded36 --- /dev/null +++ b/PCB/arduino-kicad-library/arduino.lib @@ -0,0 +1,1059 @@ +EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#
+# Arduino_101_Shield
+#
+DEF Arduino_101_Shield XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_101_Shield" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+$FPLIST
+ Arduino_101_Shield
+$ENDFPLIST
+DRAW
+T 900 -500 -50 60 0 0 0 Analogue Normal 0 C C
+T 900 -500 700 60 0 0 0 I²C Normal 0 C C
+T 900 -500 450 60 0 0 0 Misc. Normal 0 C C
+T 900 500 -1000 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -800 60 0 0 0 Power Normal 0 C C
+T 900 -500 1000 60 0 0 0 Serial Normal 0 C C
+T 900 500 -500 60 0 0 0 SPI Normal 0 C C
+S -1000 1200 1000 -1200 0 0 0 f
+S -800 -1050 -500 -1050 0 0 0 N
+S -750 -550 -500 -550 0 0 0 N
+S 500 -750 500 -600 0 0 0 N
+S 500 -400 500 -250 0 0 0 N
+S 550 -750 500 -750 0 0 0 N
+S 600 -250 500 -250 0 0 0 N
+S 650 -1000 550 -1000 0 0 0 N
+S 650 -950 650 -1050 0 0 0 N
+S 700 -1050 650 -1050 0 0 0 N
+S 700 -950 650 -950 0 0 0 N
+P 2 0 0 0 -750 700 -600 700 N
+P 2 0 0 0 -600 1000 -550 1000 N
+P 2 0 0 0 -550 450 -800 450 N
+P 2 0 0 0 -500 -1050 -500 -950 N
+P 2 0 0 0 -500 -600 -500 -650 N
+P 2 0 0 0 -500 -550 -500 -600 N
+P 3 0 0 0 -500 -300 -500 -350 -750 -350 N
+P 3 0 0 0 -500 200 -500 250 -850 250 N
+P 3 0 0 0 500 350 500 -50 800 -50 N
+P 3 0 0 0 500 650 500 1050 850 1050 N
+P 4 0 0 0 -800 750 -750 750 -750 650 -800 650 N
+P 4 0 0 0 -650 1050 -600 1050 -600 950 -650 950 N
+T 900 500 500 60 0 1 0 GPIO Normal 0 C C
+X A0 A0 -1300 -250 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 1050 300 R 50 50 1 1 B
+X A1 A1 -1300 -150 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 950 300 R 50 50 1 1 B
+X A2 A2 -1300 -50 300 R 50 50 1 1 B
+X D2 D2 1300 1050 300 L 50 50 1 1 B
+X A3 A3 -1300 50 300 R 50 50 1 1 B
+X D3 D3 1300 950 300 L 50 50 1 1 B
+X A4 A4 -1300 150 300 R 50 50 1 1 B
+X D4 D4 1300 850 300 L 50 50 1 1 B
+X A5 A5 -1300 250 300 R 50 50 1 1 B
+X D5 D5 1300 750 300 L 50 50 1 1 B
+X D6 D6 1300 650 300 L 50 50 1 1 B
+X D7 D7 1300 550 300 L 50 50 1 1 B
+X D8 D8 1300 450 300 L 50 50 1 1 B
+X D9 D9 1300 350 300 L 50 50 1 1 B
+X D10_CS D10 1300 250 300 L 50 50 1 1 B
+X D11 D11 1300 150 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -950 300 R 50 50 1 1 W
+X D12 D12 1300 50 300 L 50 50 1 1 B
+X SPI_5V 5V2 1300 -550 300 L 50 50 1 1 W
+X D13 D13 1300 -50 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -850 300 R 50 50 1 1 W
+X SDA SDA -1300 650 300 R 50 50 1 1 B
+X SPI_SCK SCK 1300 -450 300 L 50 50 1 1 O C
+X SCL SCL -1300 750 300 R 50 50 1 1 B C
+X VIN VIN -1300 -1050 300 R 50 50 1 1 W
+X ATN ATN -1300 450 300 R 50 50 1 1 B
+X GND GND1 -1300 -550 300 R 50 50 1 1 W
+X RESET RST1 1300 -950 300 L 50 50 1 1 C L
+X GND GND2 -1300 -650 300 R 50 50 1 1 W
+X SPI_RESET RST2 1300 -750 300 L 50 50 1 1 C L
+X GND GND3 -1300 -750 300 R 50 50 1 1 W
+X SPI_GND GND4 1300 -650 300 L 50 50 1 1 W
+X AREF AREF -1300 -350 300 R 50 50 1 1 I
+X IOREF IORF 1300 -1050 300 L 50 50 1 1 O
+X SPI_MOSI MOSI 1300 -350 300 L 50 50 1 1 O
+X SPI_MISO MISO 1300 -250 300 L 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# Arduino_Due_Shield
+#
+DEF Arduino_Due_Shield XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Due_Shield" -100 0 60 V V C CNN
+F2 "" 700 2750 60 H I C CNN
+F3 "" 700 2750 60 H I C CNN
+$FPLIST
+ Arduino_Due_Shield
+$ENDFPLIST
+DRAW
+T 900 -500 -50 60 0 0 0 Analogue~I/O Normal 0 C C
+T 900 -500 900 60 0 0 0 CAN Normal 0 C C
+T 900 -500 1200 60 0 0 0 I²C Normal 0 C C
+T 900 -500 -1000 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -1700 60 0 0 0 Power Normal 0 C C
+T 900 600 1600 60 0 0 0 PWM Normal 0 C C
+T 900 -500 1800 60 0 0 0 Serial Normal 0 C C
+T 0 0 1800 60 0 0 0 SPI Normal 0 C C
+S -1000 -2300 1000 2300 0 0 0 f
+S -800 -2150 -500 -2150 0 0 0 N
+S -750 -1250 -500 -1250 0 0 0 N
+S -750 -750 -500 -750 0 0 0 N
+S -750 650 -500 650 0 0 0 N
+S -750 1050 -500 1050 0 0 0 N
+S -700 -1050 -650 -1050 0 0 0 N
+S -700 -950 -650 -950 0 0 0 N
+S -700 850 -650 850 0 0 0 N
+S -700 950 -650 950 0 0 0 N
+S -650 -1000 -550 -1000 0 0 0 N
+S -650 -950 -650 -1050 0 0 0 N
+S -650 900 -550 900 0 0 0 N
+S -650 950 -650 850 0 0 0 N
+S -650 2150 -500 2150 0 0 0 N
+S -600 1350 -500 1350 0 0 0 N
+S -600 1450 -500 1450 0 0 0 N
+S -500 -2150 -500 -1900 0 0 0 N
+S -500 -1250 -500 -1500 0 0 0 N
+S -500 -750 -500 -400 0 0 0 N
+S -500 650 -500 300 0 0 0 N
+S -500 1050 -500 1100 0 0 0 N
+S -500 1350 -500 1300 0 0 0 N
+S -500 1650 -500 1450 0 0 0 N
+S -500 1950 -500 2150 0 0 0 N
+S -250 1900 -250 1800 0 0 0 N
+S -100 1800 -250 1800 0 0 0 N
+S 250 1800 100 1800 0 0 0 N
+S 250 1850 250 1800 0 0 0 N
+P 2 0 0 0 500 -2150 800 -2150 N
+P 2 0 0 0 850 2150 500 2150 N
+P 3 0 0 0 600 1750 600 2100 850 2150 N
+P 3 0 0 0 800 1050 600 1100 600 1450 N
+T 900 500 0 60 0 1 0 GPIO Normal 0 C C
+S 500 -2150 500 -150 1 0 0 N
+S 500 2150 500 150 1 0 0 N
+X A0 A0 -1300 450 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 2150 300 R 50 50 1 1 B
+X A1 A1 -1300 350 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 2050 300 R 50 50 1 1 B
+X A2 A2 -1300 250 300 R 50 50 1 1 B
+X D2 D2 1300 2150 300 L 50 50 1 1 B
+X A3 A3 -1300 150 300 R 50 50 1 1 B
+X D3 D3 1300 2050 300 L 50 50 1 1 B
+X A4 A4 -1300 50 300 R 50 50 1 1 B
+X D4_CS1 D4 1300 1950 300 L 50 50 1 1 B
+X A5 A5 -1300 -50 300 R 50 50 1 1 B
+X D5 D5 1300 1850 300 L 50 50 1 1 B
+X A6 A6 -1300 -150 300 R 50 50 1 1 B
+X D6 D6 1300 1750 300 L 50 50 1 1 B
+X A7 A7 -1300 -250 300 R 50 50 1 1 B
+X D7 D7 1300 1650 300 L 50 50 1 1 B
+X A8 A8 -1300 -350 300 R 50 50 1 1 B
+X D8 D8 1300 1550 300 L 50 50 1 1 B
+X A9 A9 -1300 -450 300 R 50 50 1 1 B
+X D9 D9 1300 1450 300 L 50 50 1 1 B
+X A10 A10 -1300 -550 300 R 50 50 1 1 B
+X D10_CS0 D10 1300 1350 300 L 50 50 1 1 B
+X D20_SDA D20 -1300 1350 300 R 50 50 1 1 B
+X D30 D30 1300 150 300 L 50 50 1 1 B
+X D40 D40 1300 -850 300 L 50 50 1 1 B
+X D50 D50 1300 -1850 300 L 50 50 1 1 B
+X A11 A11 -1300 -650 300 R 50 50 1 1 B
+X D11 D11 1300 1250 300 L 50 50 1 1 B
+X D21_SCL D21 -1300 1250 300 R 50 50 1 1 B C
+X D31 D31 1300 50 300 L 50 50 1 1 B
+X D41 D41 1300 -950 300 L 50 50 1 1 B
+X D51 D51 1300 -1950 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -1850 300 R 50 50 1 1 W
+X D12 D12 1300 1150 300 L 50 50 1 1 B
+X D22 D22 1300 950 300 L 50 50 1 1 B
+X D32 D32 1300 -50 300 L 50 50 1 1 B
+X D42 D42 1300 -1050 300 L 50 50 1 1 B
+X D52_CS2 D52 1300 -2050 300 L 50 50 1 1 B
+X SPI_5V 5V2 50 2600 300 D 50 50 1 1 W
+X D13 D13 1300 1050 300 L 50 50 1 1 B
+X D23 D23 1300 850 300 L 50 50 1 1 B
+X D33 D33 1300 -150 300 L 50 50 1 1 B
+X D43 D43 1300 -1150 300 L 50 50 1 1 B
+X D53 D53 1300 -2150 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -1750 300 R 50 50 1 1 W
+X 5V 5V3 -1300 -1950 300 R 50 50 1 1 W
+X D14_TX3 D14 -1300 1450 300 R 50 50 1 1 B
+X D24 D24 1300 750 300 L 50 50 1 1 B
+X D34 D34 1300 -250 300 L 50 50 1 1 B
+X D44 D44 1300 -1250 300 L 50 50 1 1 B
+X 5V 5V4 -1300 -2050 300 R 50 50 1 1 W
+X D15_RX3 D15 -1300 1550 300 R 50 50 1 1 B
+X D25 D25 1300 650 300 L 50 50 1 1 B
+X D35 D35 1300 -350 300 L 50 50 1 1 B
+X D45 D45 1300 -1350 300 L 50 50 1 1 B
+X D16_TX2 D16 -1300 1650 300 R 50 50 1 1 B
+X D26 D26 1300 550 300 L 50 50 1 1 B
+X D36 D36 1300 -450 300 L 50 50 1 1 B
+X D46 D46 1300 -1450 300 L 50 50 1 1 B
+X D17_RX2 D17 -1300 1750 300 R 50 50 1 1 B
+X D27 D27 1300 450 300 L 50 50 1 1 B
+X D37 D37 1300 -550 300 L 50 50 1 1 B
+X D47 D47 1300 -1550 300 L 50 50 1 1 B
+X D18_TX1 D18 -1300 1850 300 R 50 50 1 1 B
+X D28 D28 1300 350 300 L 50 50 1 1 B
+X D38 D38 1300 -650 300 L 50 50 1 1 B
+X D48 D48 1300 -1650 300 L 50 50 1 1 B
+X D19_RX1 D19 -1300 1950 300 R 50 50 1 1 B
+X D29 D29 1300 250 300 L 50 50 1 1 B
+X D39 D39 1300 -750 300 L 50 50 1 1 B
+X D49 D49 1300 -1750 300 L 50 50 1 1 B
+X SPI_SCK SCK -50 2600 300 D 50 50 1 1 O C
+X VIN VIN -1300 -2150 300 R 50 50 1 1 W
+X DAC0 DAC0 -1300 650 300 R 50 50 1 1 B
+X SDA1 SDA1 -1300 1150 300 R 50 50 1 1 B
+X DAC1 DAC1 -1300 550 300 R 50 50 1 1 B
+X GND GND1 -1300 -1250 300 R 50 50 1 1 W
+X SCL1 SCL1 -1300 1050 300 R 50 50 1 1 B C
+X RESET RST1 -1300 -950 300 R 50 50 1 1 C L
+X GND GND2 -1300 -1350 300 R 50 50 1 1 W
+X SPI_RESET RST2 250 2600 300 D 50 50 1 1 C L
+X GND GND3 -1300 -1450 300 R 50 50 1 1 W
+X SPI_GND GND4 150 2600 300 D 50 50 1 1 W
+X GND GND5 -1300 -1550 300 R 50 50 1 1 W
+X GND GND6 -1300 -1650 300 R 50 50 1 1 W
+X AREF AREF -1300 -750 300 R 50 50 1 1 I
+X IOREF IORF -1300 -1050 300 R 50 50 1 1 O
+X SPI_MOSI MOSI -150 2600 300 D 50 50 1 1 O
+X SPI_MISO MISO -250 2600 300 D 50 50 1 1 I
+X CANRX CANR -1300 950 300 R 50 50 1 1 B
+X CANTX CANT -1300 850 300 R 50 50 1 1 B
+ENDDRAW
+ENDDEF
+#
+# Arduino_Leonardo_Shield
+#
+DEF Arduino_Leonardo_Shield XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Leonardo_Shield" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+$FPLIST
+ Arduino_Leonardo_Shield
+$ENDFPLIST
+DRAW
+T 900 -500 50 60 0 0 0 Analogue Normal 0 C C
+T 900 -500 700 60 0 0 0 I²C Normal 0 C C
+T 900 500 -1000 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -800 60 0 0 0 Power Normal 0 C C
+T 900 -500 1000 60 0 0 0 Serial Normal 0 C C
+T 900 500 -500 60 0 0 0 SPI Normal 0 C C
+S -1000 1200 1000 -1200 0 0 0 f
+S -800 -1050 -500 -1050 0 0 0 N
+S -750 -550 -500 -550 0 0 0 N
+S 500 -750 500 -600 0 0 0 N
+S 500 -400 500 -250 0 0 0 N
+S 550 -750 500 -750 0 0 0 N
+S 600 -250 500 -250 0 0 0 N
+S 650 -1000 550 -1000 0 0 0 N
+S 650 -950 650 -1050 0 0 0 N
+S 700 -1050 650 -1050 0 0 0 N
+S 700 -950 650 -950 0 0 0 N
+P 2 0 0 0 -750 700 -600 700 N
+P 2 0 0 0 -600 1000 -550 1000 N
+P 2 0 0 0 -500 -1050 -500 -950 N
+P 2 0 0 0 -500 -600 -500 -650 N
+P 2 0 0 0 -500 -550 -500 -600 N
+P 3 0 0 0 -500 -200 -500 -250 -750 -250 N
+P 3 0 0 0 -500 300 -500 350 -850 350 N
+P 3 0 0 0 500 350 500 -50 800 -50 N
+P 3 0 0 0 500 650 500 1050 650 1050 N
+P 4 0 0 0 -800 750 -750 750 -750 650 -800 650 N
+P 4 0 0 0 -650 1050 -600 1050 -600 950 -650 950 N
+T 900 500 500 60 0 1 0 GPIO Normal 0 C C
+X A0 A0 -1300 -150 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 1050 300 R 50 50 1 1 B
+X A1 A1 -1300 -50 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 950 300 R 50 50 1 1 B
+X A2 A2 -1300 50 300 R 50 50 1 1 B
+X D2_INT1 D2 1300 1050 300 L 50 50 1 1 B
+X A3 A3 -1300 150 300 R 50 50 1 1 B
+X D3_INT0 D3 1300 950 300 L 50 50 1 1 B
+X A4 A4 -1300 250 300 R 50 50 1 1 B
+X D4 D4 1300 850 300 L 50 50 1 1 B
+X A5 A5 -1300 350 300 R 50 50 1 1 B
+X D5 D5 1300 750 300 L 50 50 1 1 B
+X D6 D6 1300 650 300 L 50 50 1 1 B
+X D7_INT4 D7 1300 550 300 L 50 50 1 1 B
+X D8 D8 1300 450 300 L 50 50 1 1 B
+X D9 D9 1300 350 300 L 50 50 1 1 B
+X D10 D10 1300 250 300 L 50 50 1 1 B
+X D11 D11 1300 150 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -950 300 R 50 50 1 1 W
+X D12 D12 1300 50 300 L 50 50 1 1 B
+X SPI_5V 5V2 1300 -550 300 L 50 50 1 1 W
+X D13 D13 1300 -50 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -850 300 R 50 50 1 1 W
+X SDA SDA -1300 650 300 R 50 50 1 1 B
+X SPI_SCK SCK 1300 -450 300 L 50 50 1 1 O C
+X SCL SCL -1300 750 300 R 50 50 1 1 B C
+X VIN VIN -1300 -1050 300 R 50 50 1 1 W
+X GND GND1 -1300 -550 300 R 50 50 1 1 W
+X RESET RST1 1300 -950 300 L 50 50 1 1 C L
+X GND GND2 -1300 -650 300 R 50 50 1 1 W
+X SPI_RESET RST2 1300 -750 300 L 50 50 1 1 C L
+X GND GND3 -1300 -750 300 R 50 50 1 1 W
+X SPI_GND GND4 1300 -650 300 L 50 50 1 1 W
+X AREF AREF -1300 -250 300 R 50 50 1 1 I
+X IOREF IORF 1300 -1050 300 L 50 50 1 1 O
+X SPI_MOSI MOSI 1300 -350 300 L 50 50 1 1 O
+X SPI_MISO MISO 1300 -250 300 L 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# Arduino_M0_Shield
+#
+DEF Arduino_M0_Shield XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_M0_Shield" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+ALIAS Arduino_M0_Pro_Shield
+$FPLIST
+ Arduino_Leonardo_Shield
+$ENDFPLIST
+DRAW
+T 900 -500 50 60 0 0 0 Analogue Normal 0 C C
+T 900 -500 700 60 0 0 0 I²C Normal 0 C C
+T 900 500 -1000 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -800 60 0 0 0 Power Normal 0 C C
+T 900 600 500 60 0 0 0 PWM Normal 0 C C
+T 900 -500 1000 60 0 0 0 Serial Normal 0 C C
+T 900 500 -500 60 0 0 0 SPI Normal 0 C C
+S -1000 1200 1000 -1200 0 0 0 f
+S -800 -1050 -500 -1050 0 0 0 N
+S -750 -550 -500 -550 0 0 0 N
+S 500 -750 500 -600 0 0 0 N
+S 500 -400 500 -250 0 0 0 N
+S 550 -750 500 -750 0 0 0 N
+S 600 -250 500 -250 0 0 0 N
+S 650 -1000 550 -1000 0 0 0 N
+S 650 -950 650 -1050 0 0 0 N
+S 700 -1050 650 -1050 0 0 0 N
+S 700 -950 650 -950 0 0 0 N
+P 2 0 0 0 -750 700 -600 700 N
+P 2 0 0 0 -600 1000 -550 1000 N
+P 2 0 0 0 -500 -1050 -500 -950 N
+P 2 0 0 0 -500 -600 -500 -650 N
+P 2 0 0 0 -500 -550 -500 -600 N
+P 3 0 0 0 -500 -200 -500 -250 -750 -250 N
+P 3 0 0 0 -500 300 -500 350 -850 350 N
+P 3 0 0 0 500 350 500 -50 800 -50 N
+P 3 0 0 0 500 650 500 1050 850 1050 N
+P 3 0 0 0 600 350 600 50 800 -50 N
+P 3 0 0 0 600 650 600 950 850 1050 N
+P 4 0 0 0 -800 750 -750 750 -750 650 -800 650 N
+P 4 0 0 0 -650 1050 -600 1050 -600 950 -650 950 N
+T 900 500 500 60 0 1 0 GPIO Normal 0 C C
+X A0/DAC A0 -1300 -150 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 1050 300 R 50 50 1 1 B
+X A1 A1 -1300 -50 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 950 300 R 50 50 1 1 B
+X A2 A2 -1300 50 300 R 50 50 1 1 B
+X D2 D2 1300 1050 300 L 50 50 1 1 B
+X A3 A3 -1300 150 300 R 50 50 1 1 B
+X D3 D3 1300 950 300 L 50 50 1 1 B
+X A4 A4 -1300 250 300 R 50 50 1 1 B
+X D4 D4 1300 850 300 L 50 50 1 1 B
+X A5 A5 -1300 350 300 R 50 50 1 1 B
+X D5 D5 1300 750 300 L 50 50 1 1 B
+X D6 D6 1300 650 300 L 50 50 1 1 B
+X D7 D7 1300 550 300 L 50 50 1 1 B
+X D8 D8 1300 450 300 L 50 50 1 1 B
+X D9 D9 1300 350 300 L 50 50 1 1 B
+X D10 D10 1300 250 300 L 50 50 1 1 B
+X D11 D11 1300 150 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -950 300 R 50 50 1 1 W
+X D12 D12 1300 50 300 L 50 50 1 1 B
+X SPI_5V 5V2 1300 -550 300 L 50 50 1 1 W
+X D13 D13 1300 -50 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -850 300 R 50 50 1 1 W
+X SDA SDA -1300 650 300 R 50 50 1 1 B
+X SPI_SCK SCK 1300 -450 300 L 50 50 1 1 O C
+X SCL SCL -1300 750 300 R 50 50 1 1 B C
+X VIN VIN -1300 -1050 300 R 50 50 1 1 W
+X GND GND1 -1300 -550 300 R 50 50 1 1 W
+X RESET RST1 1300 -950 300 L 50 50 1 1 C L
+X GND GND2 -1300 -650 300 R 50 50 1 1 W
+X SPI_RESET RST2 1300 -750 300 L 50 50 1 1 C L
+X GND GND3 -1300 -750 300 R 50 50 1 1 W
+X SPI_GND GND4 1300 -650 300 L 50 50 1 1 W
+X AREF AREF -1300 -250 300 R 50 50 1 1 I
+X IOREF IORF 1300 -1050 300 L 50 50 1 1 O
+X SPI_MOSI MOSI 1300 -350 300 L 50 50 1 1 O
+X SPI_MISO MISO 1300 -250 300 L 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# Arduino_Mega2560_Shield
+#
+DEF Arduino_Mega2560_Shield XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Mega2560_Shield" -100 0 60 V V C CNN
+F2 "" 700 2750 60 H I C CNN
+F3 "" 700 2750 60 H I C CNN
+$FPLIST
+ Arduino_Mega2560_Shield
+$ENDFPLIST
+DRAW
+T 900 -500 50 60 0 0 0 Analogue~I/O Normal 0 C C
+T 900 -500 1200 60 0 0 0 I²C Normal 0 C C
+T 900 -500 -1000 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -1700 60 0 0 0 Power Normal 0 C C
+T 900 600 -1350 60 0 0 0 PWM Normal 0 C C
+T 900 600 1600 60 0 0 0 PWM Normal 0 C C
+T 900 -500 1800 60 0 0 0 Serial Normal 0 C C
+T 0 0 1800 60 0 0 0 SPI Normal 0 C C
+S -1000 -2300 1000 2300 0 0 0 f
+S -800 -2150 -500 -2150 0 0 0 N
+S -750 -1250 -500 -1250 0 0 0 N
+S -750 -750 -500 -750 0 0 0 N
+S -750 1050 -500 1050 0 0 0 N
+S -700 -1050 -650 -1050 0 0 0 N
+S -700 -950 -650 -950 0 0 0 N
+S -650 -1000 -550 -1000 0 0 0 N
+S -650 -950 -650 -1050 0 0 0 N
+S -650 2150 -500 2150 0 0 0 N
+S -600 1350 -500 1350 0 0 0 N
+S -600 1450 -500 1450 0 0 0 N
+S -500 -2150 -500 -1900 0 0 0 N
+S -500 -1250 -500 -1500 0 0 0 N
+S -500 1050 -500 1100 0 0 0 N
+S -500 1350 -500 1300 0 0 0 N
+S -500 1650 -500 1450 0 0 0 N
+S -500 1950 -500 2150 0 0 0 N
+S -250 1900 -250 1800 0 0 0 N
+S -100 1800 -250 1800 0 0 0 N
+S 250 1800 100 1800 0 0 0 N
+S 250 1850 250 1800 0 0 0 N
+P 2 0 0 0 -850 850 -500 850 N
+P 2 0 0 0 -500 -750 -500 -300 N
+P 2 0 0 0 -500 400 -500 850 N
+P 2 0 0 0 500 -2150 650 -2150 N
+P 2 0 0 0 500 2150 650 2150 N
+P 2 0 0 0 700 -1350 650 -1350 N
+P 3 0 0 0 600 1450 600 1100 800 1050 N
+P 3 0 0 0 600 1750 600 2100 650 2150 N
+P 4 0 0 0 800 -1250 700 -1300 700 -1400 800 -1450 N
+T 900 500 0 60 0 1 0 GPIO Normal 0 C C
+S 500 -2150 500 -150 1 0 0 N
+S 500 2150 500 150 1 0 0 N
+X A0 A0 -1300 850 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 2150 300 R 50 50 1 1 B
+X A1 A1 -1300 750 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 2050 300 R 50 50 1 1 B
+X A2 A2 -1300 650 300 R 50 50 1 1 B
+X D2_INT0 D2 1300 2150 300 L 50 50 1 1 B
+X A3 A3 -1300 550 300 R 50 50 1 1 B
+X D3_INT1 D3 1300 2050 300 L 50 50 1 1 B
+X A4 A4 -1300 450 300 R 50 50 1 1 B
+X D4 D4 1300 1950 300 L 50 50 1 1 B
+X A5 A5 -1300 350 300 R 50 50 1 1 B
+X D5 D5 1300 1850 300 L 50 50 1 1 B
+X A6 A6 -1300 250 300 R 50 50 1 1 B
+X D6 D6 1300 1750 300 L 50 50 1 1 B
+X A7 A7 -1300 150 300 R 50 50 1 1 B
+X D7 D7 1300 1650 300 L 50 50 1 1 B
+X A8 A8 -1300 50 300 R 50 50 1 1 B
+X D8 D8 1300 1550 300 L 50 50 1 1 B
+X A9 A9 -1300 -50 300 R 50 50 1 1 B
+X D9 D9 1300 1450 300 L 50 50 1 1 B
+X A10 A10 -1300 -150 300 R 50 50 1 1 B
+X D10 D10 1300 1350 300 L 50 50 1 1 B
+X D20_SDA D20 -1300 1350 300 R 50 50 1 1 B
+X D30 D30 1300 150 300 L 50 50 1 1 B
+X D40 D40 1300 -850 300 L 50 50 1 1 B
+X D50 D50 1300 -1850 300 L 50 50 1 1 B
+X A11 A11 -1300 -250 300 R 50 50 1 1 B
+X D11 D11 1300 1250 300 L 50 50 1 1 B
+X D21_SCL D21 -1300 1250 300 R 50 50 1 1 B C
+X D31 D31 1300 50 300 L 50 50 1 1 B
+X D41 D41 1300 -950 300 L 50 50 1 1 B
+X D51 D51 1300 -1950 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -1850 300 R 50 50 1 1 W
+X A12 A12 -1300 -350 300 R 50 50 1 1 B
+X D12 D12 1300 1150 300 L 50 50 1 1 B
+X D22 D22 1300 950 300 L 50 50 1 1 B
+X D32 D32 1300 -50 300 L 50 50 1 1 B
+X D42 D42 1300 -1050 300 L 50 50 1 1 B
+X D52 D52 1300 -2050 300 L 50 50 1 1 B
+X SPI_5V 5V2 50 2600 300 D 50 50 1 1 W
+X A13 A13 -1300 -450 300 R 50 50 1 1 B
+X D13 D13 1300 1050 300 L 50 50 1 1 B
+X D23 D23 1300 850 300 L 50 50 1 1 B
+X D33 D33 1300 -150 300 L 50 50 1 1 B
+X D43 D43 1300 -1150 300 L 50 50 1 1 B
+X D53_SS D53 1300 -2150 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -1750 300 R 50 50 1 1 W
+X 5V 5V3 -1300 -1950 300 R 50 50 1 1 W
+X A14 A14 -1300 -550 300 R 50 50 1 1 B
+X D14_TX3 D14 -1300 1450 300 R 50 50 1 1 B
+X D24 D24 1300 750 300 L 50 50 1 1 B
+X D34 D34 1300 -250 300 L 50 50 1 1 B
+X D44 D44 1300 -1250 300 L 50 50 1 1 B
+X 5V 5V4 -1300 -2050 300 R 50 50 1 1 W
+X A15 A15 -1300 -650 300 R 50 50 1 1 B
+X D15_RX3 D15 -1300 1550 300 R 50 50 1 1 B
+X D25 D25 1300 650 300 L 50 50 1 1 B
+X D35 D35 1300 -350 300 L 50 50 1 1 B
+X D45 D45 1300 -1350 300 L 50 50 1 1 B
+X D16_TX2 D16 -1300 1650 300 R 50 50 1 1 B
+X D26 D26 1300 550 300 L 50 50 1 1 B
+X D36 D36 1300 -450 300 L 50 50 1 1 B
+X D46 D46 1300 -1450 300 L 50 50 1 1 B
+X D17_RX2 D17 -1300 1750 300 R 50 50 1 1 B
+X D27 D27 1300 450 300 L 50 50 1 1 B
+X D37 D37 1300 -550 300 L 50 50 1 1 B
+X D47 D47 1300 -1550 300 L 50 50 1 1 B
+X D18_TX1 D18 -1300 1850 300 R 50 50 1 1 B
+X D28 D28 1300 350 300 L 50 50 1 1 B
+X D38 D38 1300 -650 300 L 50 50 1 1 B
+X D48 D48 1300 -1650 300 L 50 50 1 1 B
+X D19_RX1 D19 -1300 1950 300 R 50 50 1 1 B
+X D29 D29 1300 250 300 L 50 50 1 1 B
+X D39 D39 1300 -750 300 L 50 50 1 1 B
+X D49 D49 1300 -1750 300 L 50 50 1 1 B
+X SDA SDA -1300 1150 300 R 50 50 1 1 B
+X SPI_SCK SCK -50 2600 300 D 50 50 1 1 O C
+X SCL SCL -1300 1050 300 R 50 50 1 1 B C
+X VIN VIN -1300 -2150 300 R 50 50 1 1 W
+X GND GND1 -1300 -1250 300 R 50 50 1 1 W
+X RESET RST1 -1300 -950 300 R 50 50 1 1 C L
+X GND GND2 -1300 -1350 300 R 50 50 1 1 W
+X SPI_RESET RST2 250 2600 300 D 50 50 1 1 C L
+X GND GND3 -1300 -1450 300 R 50 50 1 1 W
+X SPI_GND GND4 150 2600 300 D 50 50 1 1 W
+X GND GND5 -1300 -1550 300 R 50 50 1 1 W
+X GND GND6 -1300 -1650 300 R 50 50 1 1 W
+X AREF AREF -1300 -750 300 R 50 50 1 1 I
+X IOREF IORF -1300 -1050 300 R 50 50 1 1 O
+X SPI_MOSI MOSI -150 2600 300 D 50 50 1 1 O
+X SPI_MISO MISO -250 2600 300 D 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# Arduino_Micro_Socket
+#
+DEF Arduino_Micro_Socket XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Micro_Socket" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+$FPLIST
+ Arduino_Micro_Socket
+$ENDFPLIST
+DRAW
+T 900 -500 0 60 0 0 0 Analogue Normal 0 C C
+T 900 -500 550 60 0 0 0 I²C Normal 0 C C
+T 900 500 -750 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -700 60 0 0 0 Power Normal 0 C C
+T 900 -500 850 60 0 0 0 Serial Normal 0 C C
+T 900 500 -350 60 0 0 0 SPI Normal 0 C C
+S -1000 1050 1000 -1050 0 0 0 f
+P 2 0 0 0 -600 550 -550 550 N
+P 2 0 0 0 -600 850 -550 850 N
+P 2 0 0 0 650 -750 550 -750 N
+P 3 0 0 0 -800 -900 -500 -900 -500 -850 N
+P 3 0 0 0 -500 -550 -500 -500 -800 -500 N
+P 3 0 0 0 -500 -250 -500 -300 -750 -300 N
+P 3 0 0 0 -500 250 -500 300 -850 300 N
+P 3 0 0 0 500 -450 500 -500 700 -500 N
+P 3 0 0 0 500 300 500 0 800 0 N
+P 3 0 0 0 600 -200 500 -200 500 -250 N
+P 3 0 0 0 850 900 500 900 500 600 N
+P 4 0 0 0 -650 600 -600 600 -600 500 -650 500 N
+P 4 0 0 0 -650 900 -600 900 -600 800 -650 800 N
+T 900 500 450 60 0 1 0 GPIO Normal 0 C C
+P 4 0 1 0 700 -700 650 -700 650 -800 700 -800 N
+X A0 A0 -1300 -200 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 900 300 R 50 50 1 1 B
+X A1 A1 -1300 -100 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 800 300 R 50 50 1 1 B
+X A2 A2 -1300 0 300 R 50 50 1 1 B
+X D2_SDA D2 -1300 600 300 R 50 50 1 1 B
+X A3 A3 -1300 100 300 R 50 50 1 1 B
+X D3_SCL D3 -1300 500 300 R 50 50 1 1 B C
+X A4 A4 -1300 200 300 R 50 50 1 1 B
+X D4 D4 1300 900 300 L 50 50 1 1 B
+X A5 A5 -1300 300 300 R 50 50 1 1 B
+X D5 D5 1300 800 300 L 50 50 1 1 B
+X D6 D6 1300 700 300 L 50 50 1 1 B
+X D7_INT4 D7 1300 600 300 L 50 50 1 1 B
+X D8 D8 1300 500 300 L 50 50 1 1 B
+X D9 D9 1300 400 300 L 50 50 1 1 B
+X SPI_CS SS 1300 -500 300 L 50 50 1 1 B
+X 5V 5V -1300 -800 300 R 50 50 1 1 W
+X D10 D10 1300 300 300 L 50 50 1 1 B
+X D11 D11 1300 200 300 L 50 50 1 1 B
+X D12 D12 1300 100 300 L 50 50 1 1 B
+X D13 D13 1300 0 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -700 300 R 50 50 1 1 W
+X SPI_SCK SCK 1300 -400 300 L 50 50 1 1 O C
+X VIN VIN -1300 -900 300 R 50 50 1 1 W
+X GND GND1 -1300 -500 300 R 50 50 1 1 W
+X RESET RST1 1300 -700 300 L 50 50 1 1 C L
+X GND GND2 -1300 -600 300 R 50 50 1 1 W
+X RESET RST2 1300 -800 300 L 50 50 1 1 C L
+X AREF AREF -1300 -300 300 R 50 50 1 1 I
+X SPI_MOSI MOSI 1300 -300 300 L 50 50 1 1 O
+X SPI_MISO MISO 1300 -200 300 L 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# Arduino_Mini_01_Socket
+#
+DEF Arduino_Mini_01_Socket XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Mini_01_Socket" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+ALIAS Arduino_Mini_02_Socket
+$FPLIST
+ Arduino_Mini_Socket
+$ENDFPLIST
+DRAW
+T 900 -400 150 60 0 0 0 Analogue Normal 0 C C
+T 900 600 -500 60 0 0 0 Header Normal 0 C C
+T 900 -500 250 60 0 0 0 I²C Normal 0 C C
+T 900 500 -900 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -650 60 0 0 0 Power Normal 0 C C
+T 900 500 -500 60 0 0 0 Prog. Normal 0 C C
+T 900 -500 850 60 0 0 0 Serial Normal 0 C C
+S -1000 1100 1000 -1050 0 0 0 f
+P 2 0 0 0 -600 250 -550 250 N
+P 2 0 0 0 -600 850 -550 850 N
+P 2 0 0 0 650 -900 550 -900 N
+P 3 0 0 0 -800 -900 -500 -900 -500 -800 N
+P 3 0 0 0 -500 -500 -500 -400 -800 -400 N
+P 3 0 0 0 -400 -100 -400 -200 -850 -200 N
+P 3 0 0 0 -400 400 -400 500 -850 500 N
+P 3 0 0 0 700 -500 700 -700 850 -700 N
+P 4 0 0 0 -650 300 -600 300 -600 200 -650 200 N
+P 4 0 0 0 -650 900 -600 900 -600 800 -650 800 N
+P 4 0 0 0 800 -300 700 -300 700 -500 650 -500 N
+T 900 500 450 60 0 1 0 GPIO Normal 0 C C
+P 3 0 1 0 600 -100 500 -100 500 300 N
+P 3 0 1 0 650 1000 500 1000 500 600 N
+P 4 0 1 0 700 -850 650 -850 650 -950 700 -950 N
+X A0 A0 -1300 -200 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 900 300 R 50 50 1 1 B
+X GND L0 -1300 -400 300 R 50 50 1 1 W
+X A1 A1 -1300 -100 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 800 300 R 50 50 1 1 B
+X n.c. L1 1300 -850 300 L 50 50 1 1 N X
+X A2 A2 -1300 0 300 R 50 50 1 1 B
+X D2_INT0 D2 1300 1000 300 L 50 50 1 1 B
+X n.c. L2 1300 -300 300 L 50 50 1 1 N X
+X A3 A3 -1300 100 300 R 50 50 1 1 B
+X D3_INT1 D3 1300 900 300 L 50 50 1 1 B
+X A4_SDA A4 -1300 200 300 R 50 50 1 1 B
+X D4 D4 1300 800 300 L 50 50 1 1 B
+X A5_SCL A5 -1300 300 300 R 50 50 1 1 B C
+X D5 D5 1300 700 300 L 50 50 1 1 B
+X A6 A6 -1300 400 300 R 50 50 1 1 I
+X D6 D6 1300 600 300 L 50 50 1 1 B
+X A7 A7 -1300 500 300 R 50 50 1 1 I
+X D7 D7 1300 500 300 L 50 50 1 1 B
+X D8 D8 1300 400 300 L 50 50 1 1 B
+X D9 D9 1300 300 300 L 50 50 1 1 B
+X RX RX 1300 -500 300 L 50 50 1 1 B
+X TX TX 1300 -400 300 L 50 50 1 1 B
+X D10_CS D10 1300 200 300 L 50 50 1 1 B
+X D11_MISO D11 1300 100 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -700 300 R 50 50 1 1 W
+X D12_MOSI D12 1300 0 300 L 50 50 1 1 B
+X 5V 5V2 1300 -700 300 L 50 50 1 1 W
+X D13_SCK D13 1300 -100 300 L 50 50 1 1 B C
+X 5V 5V3 -1300 -800 300 R 50 50 1 1 W
+X VIN VIN -1300 -900 300 R 50 50 1 1 W
+X GND GND2 -1300 -500 300 R 50 50 1 1 W
+X RESET RST2 1300 -950 300 L 50 50 1 1 C L
+X GND GND3 1300 -600 300 L 50 50 1 1 W
+X GND GND4 -1300 -600 300 R 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# Arduino_Mini_03_Socket
+#
+DEF Arduino_Mini_03_Socket XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Mini_03_Socket" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+$FPLIST
+ Arduino_Mini_Socket
+$ENDFPLIST
+DRAW
+T 900 -400 150 60 0 0 0 Analogue Normal 0 C C
+T 900 600 -500 60 0 0 0 Header Normal 0 C C
+T 900 -500 250 60 0 0 0 I²C Normal 0 C C
+T 900 500 -900 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -650 60 0 0 0 Power Normal 0 C C
+T 900 500 -500 60 0 0 0 Prog. Normal 0 C C
+T 900 -500 850 60 0 0 0 Serial Normal 0 C C
+S -1000 1100 1000 -1050 0 0 0 f
+P 2 0 0 0 -600 250 -550 250 N
+P 2 0 0 0 -600 850 -550 850 N
+P 2 0 0 0 650 -900 550 -900 N
+P 3 0 0 0 -800 -900 -500 -900 -500 -800 N
+P 3 0 0 0 -500 -500 -500 -400 -800 -400 N
+P 3 0 0 0 -400 -100 -400 -200 -850 -200 N
+P 3 0 0 0 -400 400 -400 500 -850 500 N
+P 3 0 0 0 700 -500 700 -700 850 -700 N
+P 4 0 0 0 -650 300 -600 300 -600 200 -650 200 N
+P 4 0 0 0 -650 900 -600 900 -600 800 -650 800 N
+P 4 0 0 0 800 -300 700 -300 700 -500 650 -500 N
+T 900 500 450 60 0 1 0 GPIO Normal 0 C C
+P 3 0 1 0 600 -100 500 -100 500 300 N
+P 3 0 1 0 650 1000 500 1000 500 600 N
+P 4 0 1 0 700 -850 650 -850 650 -950 700 -950 N
+X A0 A0 -1300 -200 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 900 300 R 50 50 1 1 B
+X GND L0 -1300 -400 300 R 50 50 1 1 W
+X A1 A1 -1300 -100 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 800 300 R 50 50 1 1 B
+X n.c. L1 1300 -850 300 L 50 50 1 1 N X
+X A2 A2 -1300 0 300 R 50 50 1 1 B
+X D2_INT0 D2 1300 1000 300 L 50 50 1 1 B
+X IO7 L2 1300 -300 300 L 50 50 1 1 B
+X A3 A3 -1300 100 300 R 50 50 1 1 B
+X D3_INT1 D3 1300 900 300 L 50 50 1 1 B
+X A4_SDA A4 -1300 200 300 R 50 50 1 1 B
+X D4 D4 1300 800 300 L 50 50 1 1 B
+X A5_SCL A5 -1300 300 300 R 50 50 1 1 B C
+X D5 D5 1300 700 300 L 50 50 1 1 B
+X A6 A6 -1300 400 300 R 50 50 1 1 I
+X D6 D6 1300 600 300 L 50 50 1 1 B
+X A7 A7 -1300 500 300 R 50 50 1 1 I
+X D7 D7 1300 500 300 L 50 50 1 1 B
+X D8 D8 1300 400 300 L 50 50 1 1 B
+X D9 D9 1300 300 300 L 50 50 1 1 B
+X RX RX 1300 -500 300 L 50 50 1 1 B
+X TX TX 1300 -400 300 L 50 50 1 1 B
+X D10_CS D10 1300 200 300 L 50 50 1 1 B
+X D11_MISO D11 1300 100 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -700 300 R 50 50 1 1 W
+X D12_MOSI D12 1300 0 300 L 50 50 1 1 B
+X 5V 5V2 1300 -700 300 L 50 50 1 1 W
+X D13_SCK D13 1300 -100 300 L 50 50 1 1 B C
+X 5V 5V3 -1300 -800 300 R 50 50 1 1 W
+X VIN VIN -1300 -900 300 R 50 50 1 1 W
+X GND GND2 -1300 -500 300 R 50 50 1 1 W
+X RESET RST2 1300 -950 300 L 50 50 1 1 C L
+X GND GND3 1300 -600 300 L 50 50 1 1 W
+X GND GND4 -1300 -600 300 R 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# Arduino_Mini_04_Socket
+#
+DEF Arduino_Mini_04_Socket XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Mini_04_Socket" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+ALIAS Arduino_Mini_05_Socket
+$FPLIST
+ Arduino_Mini_Socket
+$ENDFPLIST
+DRAW
+T 900 -400 150 60 0 0 0 Analogue Normal 0 C C
+T 900 600 -500 60 0 0 0 Header Normal 0 C C
+T 900 -500 250 60 0 0 0 I²C Normal 0 C C
+T 900 500 -900 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -650 60 0 0 0 Power Normal 0 C C
+T 900 500 -500 60 0 0 0 Prog. Normal 0 C C
+T 900 -500 850 60 0 0 0 Serial Normal 0 C C
+S -1000 1100 1000 -1050 0 0 0 f
+P 2 0 0 0 -600 250 -550 250 N
+P 2 0 0 0 -600 850 -550 850 N
+P 2 0 0 0 650 -900 550 -900 N
+P 3 0 0 0 -800 -900 -500 -900 -500 -800 N
+P 3 0 0 0 -500 -500 -500 -400 -800 -400 N
+P 3 0 0 0 -400 -100 -400 -200 -850 -200 N
+P 3 0 0 0 -400 400 -400 500 -850 500 N
+P 3 0 0 0 700 -500 700 -700 850 -700 N
+P 4 0 0 0 -650 300 -600 300 -600 200 -650 200 N
+P 4 0 0 0 -650 900 -600 900 -600 800 -650 800 N
+P 4 0 0 0 800 -300 700 -300 700 -500 650 -500 N
+T 900 500 450 60 0 1 0 GPIO Normal 0 C C
+P 3 0 1 0 600 -100 500 -100 500 300 N
+P 3 0 1 0 650 1000 500 1000 500 600 N
+P 4 0 1 0 700 -850 650 -850 650 -950 700 -950 N
+X A0 A0 -1300 -200 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 900 300 R 50 50 1 1 B
+X RESET L0 1300 -850 300 L 50 50 1 1 C L
+X A1 A1 -1300 -100 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 800 300 R 50 50 1 1 B
+X GND L1 -1300 -400 300 R 50 50 1 1 W
+X A2 A2 -1300 0 300 R 50 50 1 1 B
+X D2_INT0 D2 1300 1000 300 L 50 50 1 1 B
+X IO7 L2 1300 -300 300 L 50 50 1 1 B
+X A3 A3 -1300 100 300 R 50 50 1 1 B
+X D3_INT1 D3 1300 900 300 L 50 50 1 1 B
+X A4_SDA A4 -1300 200 300 R 50 50 1 1 B
+X D4 D4 1300 800 300 L 50 50 1 1 B
+X A5_SCL A5 -1300 300 300 R 50 50 1 1 B C
+X D5 D5 1300 700 300 L 50 50 1 1 B
+X A6 A6 -1300 400 300 R 50 50 1 1 I
+X D6 D6 1300 600 300 L 50 50 1 1 B
+X A7 A7 -1300 500 300 R 50 50 1 1 I
+X D7 D7 1300 500 300 L 50 50 1 1 B
+X D8 D8 1300 400 300 L 50 50 1 1 B
+X D9 D9 1300 300 300 L 50 50 1 1 B
+X RX RX 1300 -500 300 L 50 50 1 1 B
+X TX TX 1300 -400 300 L 50 50 1 1 B
+X D10_CS D10 1300 200 300 L 50 50 1 1 B
+X D11_MISO D11 1300 100 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -700 300 R 50 50 1 1 W
+X D12_MOSI D12 1300 0 300 L 50 50 1 1 B
+X 5V 5V2 1300 -700 300 L 50 50 1 1 W
+X D13_SCK D13 1300 -100 300 L 50 50 1 1 B C
+X 5V 5V3 -1300 -800 300 R 50 50 1 1 W
+X VIN VIN -1300 -900 300 R 50 50 1 1 W
+X GND GND2 -1300 -500 300 R 50 50 1 1 W
+X RESET RST2 1300 -950 300 L 50 50 1 1 C L
+X GND GND3 1300 -600 300 L 50 50 1 1 W
+X GND GND4 -1300 -600 300 R 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# Arduino_Nano_Socket
+#
+DEF Arduino_Nano_Socket XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Nano_Socket" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+$FPLIST
+ Arduino_Nano_Socket
+$ENDFPLIST
+DRAW
+T 900 -400 100 60 0 0 0 Analogue Normal 0 C C
+T 900 -500 250 60 0 0 0 I²C Normal 0 C C
+T 900 500 -750 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -700 60 0 0 0 Power Normal 0 C C
+T 900 -500 850 60 0 0 0 Serial Normal 0 C C
+S -1000 1050 1000 -1050 0 0 0 f
+P 2 0 0 0 -600 250 -550 250 N
+P 2 0 0 0 -600 850 -550 850 N
+P 2 0 0 0 650 -750 550 -750 N
+P 3 0 0 0 -800 -900 -500 -900 -500 -850 N
+P 3 0 0 0 -500 -550 -500 -500 -800 -500 N
+P 4 0 0 0 -650 300 -600 300 -600 200 -650 200 N
+P 4 0 0 0 -650 900 -600 900 -600 800 -650 800 N
+T 900 500 350 60 0 1 0 GPIO Normal 0 C C
+P 3 0 1 0 -850 500 -400 500 -400 350 N
+P 3 0 1 0 -750 -300 -400 -300 -400 -150 N
+P 3 0 1 0 600 -200 500 -200 500 200 N
+P 3 0 1 0 650 900 500 900 500 500 N
+P 4 0 1 0 700 -700 650 -700 650 -800 700 -800 N
+X A0 A0 -1300 -200 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 900 300 R 50 50 1 1 B
+X A1 A1 -1300 -100 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 800 300 R 50 50 1 1 B
+X A2 A2 -1300 0 300 R 50 50 1 1 B
+X D2_INT0 D2 1300 900 300 L 50 50 1 1 B
+X A3 A3 -1300 100 300 R 50 50 1 1 B
+X D3_INT1 D3 1300 800 300 L 50 50 1 1 B
+X A4_SDA A4 -1300 200 300 R 50 50 1 1 B
+X D4 D4 1300 700 300 L 50 50 1 1 B
+X A5_SCL A5 -1300 300 300 R 50 50 1 1 B C
+X D5 D5 1300 600 300 L 50 50 1 1 B
+X A6 A6 -1300 400 300 R 50 50 1 1 I
+X D6 D6 1300 500 300 L 50 50 1 1 B
+X A7 A7 -1300 500 300 R 50 50 1 1 I
+X D7 D7 1300 400 300 L 50 50 1 1 B
+X D8 D8 1300 300 300 L 50 50 1 1 B
+X D9 D9 1300 200 300 L 50 50 1 1 B
+X 5V 5V -1300 -800 300 R 50 50 1 1 W
+X D10_CS D10 1300 100 300 L 50 50 1 1 B
+X D11_MOSI D11 1300 0 300 L 50 50 1 1 B
+X D12_MISO D12 1300 -100 300 L 50 50 1 1 B
+X D13_SCK D13 1300 -200 300 L 50 50 1 1 B C
+X 3.3V 3V3 -1300 -700 300 R 50 50 1 1 W
+X VIN VIN -1300 -900 300 R 50 50 1 1 W
+X GND GND1 -1300 -500 300 R 50 50 1 1 W
+X RESET RST1 1300 -700 300 L 50 50 1 1 C L
+X GND GND2 -1300 -600 300 R 50 50 1 1 W
+X RESET RST2 1300 -800 300 L 50 50 1 1 C L
+X AREF AREF -1300 -300 300 R 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# Arduino_Uno_Shield
+#
+DEF Arduino_Uno_Shield XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Uno_Shield" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+$FPLIST
+ Arduino_Uno_Shield
+$ENDFPLIST
+DRAW
+T 900 -500 50 60 0 0 0 Analogue Normal 0 C C
+T 900 -500 700 60 0 0 0 I²C Normal 0 C C
+T 900 500 -1000 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -800 60 0 0 0 Power Normal 0 C C
+T 900 -500 1000 60 0 0 0 Serial Normal 0 C C
+T 900 500 -500 60 0 0 0 SPI Normal 0 C C
+S -1000 1200 1000 -1200 0 0 0 f
+S -800 -1050 -500 -1050 0 0 0 N
+S -750 -550 -500 -550 0 0 0 N
+S 500 -750 500 -600 0 0 0 N
+S 500 -400 500 -250 0 0 0 N
+S 550 -750 500 -750 0 0 0 N
+S 600 -250 500 -250 0 0 0 N
+S 650 -1000 550 -1000 0 0 0 N
+S 650 -950 650 -1050 0 0 0 N
+S 700 -1050 650 -1050 0 0 0 N
+S 700 -950 650 -950 0 0 0 N
+P 2 0 0 0 -750 700 -600 700 N
+P 2 0 0 0 -600 1000 -550 1000 N
+P 2 0 0 0 -500 -1050 -500 -950 N
+P 2 0 0 0 -500 -600 -500 -650 N
+P 2 0 0 0 -500 -550 -500 -600 N
+P 3 0 0 0 -500 -200 -500 -250 -750 -250 N
+P 3 0 0 0 -500 300 -500 350 -850 350 N
+P 3 0 0 0 500 350 500 -50 800 -50 N
+P 3 0 0 0 500 650 500 1050 650 1050 N
+P 4 0 0 0 -800 750 -750 750 -750 650 -800 650 N
+P 4 0 0 0 -650 1050 -600 1050 -600 950 -650 950 N
+T 900 500 500 60 0 1 0 GPIO Normal 0 C C
+X A0 A0 -1300 -150 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 1050 300 R 50 50 1 1 B
+X A1 A1 -1300 -50 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 950 300 R 50 50 1 1 B
+X A2 A2 -1300 50 300 R 50 50 1 1 B
+X D2_INT0 D2 1300 1050 300 L 50 50 1 1 B
+X A3 A3 -1300 150 300 R 50 50 1 1 B
+X D3_INT1 D3 1300 950 300 L 50 50 1 1 B
+X A4 A4 -1300 250 300 R 50 50 1 1 B
+X D4 D4 1300 850 300 L 50 50 1 1 B
+X A5 A5 -1300 350 300 R 50 50 1 1 B
+X D5 D5 1300 750 300 L 50 50 1 1 B
+X D6 D6 1300 650 300 L 50 50 1 1 B
+X D7 D7 1300 550 300 L 50 50 1 1 B
+X D8 D8 1300 450 300 L 50 50 1 1 B
+X D9 D9 1300 350 300 L 50 50 1 1 B
+X D10_CS D10 1300 250 300 L 50 50 1 1 B
+X D11 D11 1300 150 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -950 300 R 50 50 1 1 W
+X D12 D12 1300 50 300 L 50 50 1 1 B
+X SPI_5V 5V2 1300 -550 300 L 50 50 1 1 W
+X D13 D13 1300 -50 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -850 300 R 50 50 1 1 W
+X SDA SDA -1300 650 300 R 50 50 1 1 B
+X SPI_SCK SCK 1300 -450 300 L 50 50 1 1 O C
+X SCL SCL -1300 750 300 R 50 50 1 1 B C
+X VIN VIN -1300 -1050 300 R 50 50 1 1 W
+X GND GND1 -1300 -550 300 R 50 50 1 1 W
+X RESET RST1 1300 -950 300 L 50 50 1 1 C L
+X GND GND2 -1300 -650 300 R 50 50 1 1 W
+X SPI_RESET RST2 1300 -750 300 L 50 50 1 1 C L
+X GND GND3 -1300 -750 300 R 50 50 1 1 W
+X SPI_GND GND4 1300 -650 300 L 50 50 1 1 W
+X AREF AREF -1300 -250 300 R 50 50 1 1 I
+X IOREF IORF 1300 -1050 300 L 50 50 1 1 O
+X SPI_MOSI MOSI 1300 -350 300 L 50 50 1 1 O
+X SPI_MISO MISO 1300 -250 300 L 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# Arduino_Zero_Shield
+#
+DEF Arduino_Zero_Shield XA 0 40 Y Y 1 F N
+F0 "XA" 100 0 60 V V C CNN
+F1 "Arduino_Zero_Shield" -100 0 60 V V C CNN
+F2 "" 1800 3750 60 H I C CNN
+F3 "" 1800 3750 60 H I C CNN
+$FPLIST
+ Arduino_Zero_Shield
+$ENDFPLIST
+DRAW
+T 900 -500 -50 60 0 0 0 Analogue Normal 0 C C
+T 900 -500 700 60 0 0 0 I²C Normal 0 C C
+T 900 -500 450 60 0 0 0 Misc. Normal 0 C C
+T 900 500 -1000 60 0 0 0 Misc. Normal 0 C C
+T 900 -500 -800 60 0 0 0 Power Normal 0 C C
+T 900 -500 1000 60 0 0 0 Serial Normal 0 C C
+T 900 500 -500 60 0 0 0 SPI Normal 0 C C
+S -1000 1200 1000 -1200 0 0 0 f
+S -800 -1050 -500 -1050 0 0 0 N
+S -750 -550 -500 -550 0 0 0 N
+S 500 -750 500 -600 0 0 0 N
+S 500 -400 500 -250 0 0 0 N
+S 550 -750 500 -750 0 0 0 N
+S 600 -250 500 -250 0 0 0 N
+S 650 -1000 550 -1000 0 0 0 N
+S 650 -950 650 -1050 0 0 0 N
+S 700 -1050 650 -1050 0 0 0 N
+S 700 -950 650 -950 0 0 0 N
+P 2 0 0 0 -750 700 -600 700 N
+P 2 0 0 0 -600 1000 -550 1000 N
+P 2 0 0 0 -550 450 -800 450 N
+P 2 0 0 0 -500 -1050 -500 -950 N
+P 2 0 0 0 -500 -600 -500 -650 N
+P 2 0 0 0 -500 -550 -500 -600 N
+P 3 0 0 0 -500 -300 -500 -350 -750 -350 N
+P 3 0 0 0 -500 200 -500 250 -850 250 N
+P 3 0 0 0 500 350 500 -50 800 -50 N
+P 3 0 0 0 500 650 500 1050 850 1050 N
+P 4 0 0 0 -800 750 -750 750 -750 650 -800 650 N
+P 4 0 0 0 -650 1050 -600 1050 -600 950 -650 950 N
+T 900 500 500 60 0 1 0 GPIO Normal 0 C C
+X A0/DAC A0 -1300 -250 300 R 50 50 1 1 B
+X D0_RX0 D0 -1300 1050 300 R 50 50 1 1 B
+X A1 A1 -1300 -150 300 R 50 50 1 1 B
+X D1_TX0 D1 -1300 950 300 R 50 50 1 1 B
+X A2 A2 -1300 -50 300 R 50 50 1 1 B
+X D2 D2 1300 1050 300 L 50 50 1 1 B
+X A3 A3 -1300 50 300 R 50 50 1 1 B
+X D3 D3 1300 950 300 L 50 50 1 1 B
+X A4 A4 -1300 150 300 R 50 50 1 1 B
+X D4 D4 1300 850 300 L 50 50 1 1 B
+X A5 A5 -1300 250 300 R 50 50 1 1 B
+X D5 D5 1300 750 300 L 50 50 1 1 B
+X D6 D6 1300 650 300 L 50 50 1 1 B
+X D7 D7 1300 550 300 L 50 50 1 1 B
+X D8 D8 1300 450 300 L 50 50 1 1 B
+X D9 D9 1300 350 300 L 50 50 1 1 B
+X D10 D10 1300 250 300 L 50 50 1 1 B
+X D11 D11 1300 150 300 L 50 50 1 1 B
+X 5V 5V1 -1300 -950 300 R 50 50 1 1 W
+X D12 D12 1300 50 300 L 50 50 1 1 B
+X SPI_5V 5V2 1300 -550 300 L 50 50 1 1 W
+X D13 D13 1300 -50 300 L 50 50 1 1 B
+X 3.3V 3V3 -1300 -850 300 R 50 50 1 1 W
+X SDA SDA -1300 650 300 R 50 50 1 1 B
+X SPI_SCK SCK 1300 -450 300 L 50 50 1 1 O C
+X SCL SCL -1300 750 300 R 50 50 1 1 B C
+X VIN VIN -1300 -1050 300 R 50 50 1 1 W
+X ATN ATN -1300 450 300 R 50 50 1 1 B
+X GND GND1 -1300 -550 300 R 50 50 1 1 W
+X RESET RST1 1300 -950 300 L 50 50 1 1 C L
+X GND GND2 -1300 -650 300 R 50 50 1 1 W
+X SPI_RESET RST2 1300 -750 300 L 50 50 1 1 C L
+X GND GND3 -1300 -750 300 R 50 50 1 1 W
+X SPI_GND GND4 1300 -650 300 L 50 50 1 1 W
+X AREF AREF -1300 -350 300 R 50 50 1 1 I
+X IOREF IORF 1300 -1050 300 L 50 50 1 1 O
+X SPI_MOSI MOSI 1300 -350 300 L 50 50 1 1 O
+X SPI_MISO MISO 1300 -250 300 L 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+#End Library
|