diff options
Diffstat (limited to 'firmware/README.md')
| -rw-r--r-- | firmware/README.md | 9 |
1 files changed, 3 insertions, 6 deletions
diff --git a/firmware/README.md b/firmware/README.md index 2159734..1cea550 100644 --- a/firmware/README.md +++ b/firmware/README.md @@ -1,12 +1,9 @@ # mqtt-weather-station firmware -This project uses [micropython](https://micropython.org/), specifically [microhomie](https://github.com/microhomie/microhomie). -Currently we build on microhomie-esp8266-v3.0.2, the binary is in the folder. +This project uses [micropython](https://micropython.org/), specifically [microhomie](https://github.com/microhomie/microhomie). Currently we build on microhomie-esp8266-v3.0.2, the binary is in the folder. -You must define the private information defined in `settings.py`. -Copy `settings.py.example` to make a folder `settings.py` and define all relevant variables. +You must define the private information defined in `settings.py`. Copy `settings.py.example` to make a folder `settings.py` and define all relevant variables. -Run `flash.sh` to flash the board. -You will need [esptool](https://github.com/espressif/esptool) and [ampy](https://github.com/scientifichackers/ampy). +Run `flash.sh` to flash the board. You will need [esptool](https://github.com/espressif/esptool) and [ampy](https://github.com/scientifichackers/ampy). We recommend an [FTDI Basic Breakout](https://www.sparkfun.com/products/9716) to physically program the ESP8266. |