\chapter{Measurement of ultrafast dynamics within PEDOT:PSS using three-pulse photon echo spectroscopy} \label{cha:pps} \textit{This Chapter presents content first published in \textcite{HorakErikH2018a}. The authors are: \begin{denumerate} \item Erik H. Horak \item Morgan T. Rea \item Kevin D. Heylman \item David Gelbwaser-Klimovsky \item Semion K. Saikin \item Blaise J. Thompson \item Daniel D. Kohler \item Kassandra A. Knapper \item Wei Wei \item Feng Pan \item Padma Gopalan \item John C. Wright \item Alán Aspuru-Guzik \item Randall H. Goldsmith \end{denumerate} This Chapter focuses on my contribution. % } \section{Introduction} % ========================================================================= Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a transparent, electrically conductive (up to 4380 S cm$^{-1}$ \cite{KimNara2013a}) polymer. % It has found widespread use as a flexible, cheap alternative to inorganic transparent electrodes such as indium tin oxide. % As a polymer, PEDOT:PSS implicitly contains a large amount of structural inhomogeneity. % On top of this, PEDOT:PSS is a two component material, composed of PEDOT (low molecular weight, p-doped, highly conductive) and PSS (high molecular-weight, insulating, stabilizing). % These two components segment into domains of conductive and non-conductive material, leading to even more structural inhomogeneity. In summary, PEDOT:PSS has a complex, nested microstructure. % From smallest to largest: \begin{ditemize} \item PEDOT oligomers (6---18-mers) \cite{KirchmeyerStephan2005a} \item these oligomers $\pi$-stack to form small nanocrystalites, 3 to 14 oligomers for pristine films to as many as 13---14 oligomers for more conductive solvent treated films \cite{TakanoTakumi2012a} \item nanocrystallites then arrange into globular conductive particles in a pancake-like shape \cite{NardesAlexandreMantovani2007a, NardesAlexandreMantovani2008a} \item these particles themselves are then linked via PSS-rich domains and assembled into nanofibril geometry akin to a string of pearls \cite{KimNara2013a, vandeRuitKevin2013a} \item nanofibrils interweave to form thin films, with PSS capping layer at surface \cite{TimpanaroS2004a} \end{ditemize} In order to be conductive, PEDOT:PSS needs to have good spatial and energetic overlap between electronic states throughout the thin film. % The exact energetics and dynamics of these electronic states, then, is a crucial piece of information needed to understand the mechanism of conductivity in PEDOT:PSS. % The electronic states responsible for conductivity have very broad and featureless transitions in the mid infrared. % Bulk, linear spectroscopy cannot tease out the relative contribution of homogeneous and inhomogeneous broadening in the breadth of these transitions. % Multidimensional spectroscopy is able to tease these two broadening mechanisms apart. % In this chapter, I report on my usage of three pulse echo (3PE) spectroscopy to constrain homogeneous and inhomgeneous linewidths in PEDOT:PSS. % \section{Methods} % ============================================================================== PEDOT:PSS (Orgacon Dry, Sigma Aldrich) was dropcast onto a glass microscope slide at 1 mg/mL at a tilt to ensure homogeneous film formation. % The sample was heated at 100 $^\circ$C for $\sim$15 min to evaporate water. % An ultrafast oscillator (Spectra-Physics Tsunami) was used to prepare $\sim$35 fs seed pulses. % These were amplified (Spectra-Physics Spitfire Pro XP, 1 kHz), split, and converted into 1300 nm 40 fs pulses using two separate optical parametric amplifiers (Light Conversion TOPAS-C): ``OPA1'' and ``OPA2''. % Pulses from OPA2 were split again, for a total of three excitation pulses: $\omega_1$, $\omega_2$ and $\omega_{2^\prime}$. % These were passed through motorized (Newport MFA-CC) retroreflectors to control their relative arrival time (``delay'') at the sample: $\tau_{21} = \tau_2 - \tau_1$ and $\tau_{22^\prime} = \tau_2 - \tau_{2^\prime}$. The three excitation pulses were focused into the sample in a $1^\circ$ right-angle isoceles triange, as in the BOXCARS configuration. \cite{EckbrethAlanC1978a} % Each excitation beam was 67 nJ focused into a 375 $\mathsf{\mu m}$ symmetric Gaussian mode for an intensity of 67 $\mathsf{\mu J / cm^2}$. % A new beam, emitted coherently from the sample, was isolated with apertures and passed into a monochromator (HORIBA Jobin Yvon MicroHR, 140 mm focal length) with a visible grating (500 nm blaze 300 groves per mm). % The monochromator was set to pass all colors (0 nm, 250 $\mathsf{\mu m}$ slits) to keep the measurement impulsive. % Signal was detected using an InSb photodiode (Teledyne Judson J10D-M204-R01M-3C-SP28). % Four wave mixing was isolated from excitation scatter using dual chopping and digital signal processing. % Two dimensional $\tau_{21}, \tau_{22^\prime}$ scans were taken for two phase matching configurations: (1) $k_{\mathsf{out}} = k_1 - k_2 + k_{2^\prime}$ (3PE) and (2) $k_{\mathsf{out}} = k_1 + k_2 - k_{2^\prime}$ (3PE*). % \autoref{pps:fig:mask} diagrams the phase matching mask used in this set of experiments. % The rephasing and nonrephasing pathways exchange their time dependance between these two configurations. % Comparing both pathways, rephasing-induced peak shifts can be extracted as in 3PE. \cite{WeinerAM1985a} % All data was modeled using numerical integration of the Liouville-von Numann equation. % Continuously variable ND filters (THORLABS NDC-100C-4M, THORLABS NDL-10C-4) were used to ensure that all three excitation pulse powers were equal within measurement error. % \begin{figure} \includegraphics[width=0.5\linewidth]{"PEDOT_PSS/mask"} \caption[Phase matching mask for 3PE, 3PE*.]{ Phase matching mask used in this experiment. Each successive ring subtends 1 degree, such that the excitation pulses are each angled one degree relative to the mask center. The two stars mark the two output poyntings detected in this work. } \label{pps:fig:mask} \end{figure} \section{Results} % ============================================================================== \autoref{pps:fig:linear} shows the transmission, reflectance, and extinction spectrum of the thin film used in this work. % The region under investigation is shaded green. % Reflectance is remarkably low across the visible and near infrared, and transmission does not change much at all over the region under investigation. % \autoref{pps:fig:raw} shows the ten raw 2D delay-delay scans that comprise the primary dataset described in this section. % The rows correspond to the two phase matching conditions, as labeled. % The data is presented on the intensity level, as raw as possible. % The five repetitions of each experiment are truly remarkably similar, showing that no damage was being done during the experiment. % Each row is normalized to the same factor, showing the remarkable \emph{quantitative} agreement between scans. % In total, these 10 scans comprise roughly eight hours of continuous illumination for this sample. % \begin{figure} \centering \includegraphics[width=0.5\linewidth]{"PEDOT_PSS/linear"} \caption[PEDOT:PSS transmission and reflectance spectra.]{ Thin film spectra. Transmission, reflectance, and extinction spectrum of the thin film used in this work. % Extinction is $\log_{10}{\mathsf{(transmission)}}$. % } \label{pps:fig:linear} \end{figure} \begin{figure} \includegraphics[width=\linewidth]{"PEDOT_PSS/raw"} \caption[Raw 3PE data.]{ Raw ultrafast data. Unprocessed two-dimensional delay-delay plots. Each discrete acquisition is plotted as a single colored pixel. Grey pixels correspond to negative results, which appear in the no-signal regions due to random noise. } \label{pps:fig:raw} \end{figure} \section{Discussion} % =========================================================================== \subsection{Assignment of zero delay} % ---------------------------------------------------------- The absolute position of complete temporal overlap of the excitation pulses (zero delay) is a crucial step in determining the magnitude of th epeak shift and therefore the total rephasing ability of the material. % The strategy for assigning zero delay relies upon the intrinsic symmetry of the two-dimensional delay space. % \autoref{pps:fig:delay_space} labels the six time-orderings (TOs) of the three pulses that are possible with two delays. % The TO labeling scheme follow from a convention first defined my Meyer, Wright and Thompson. \cite{MeyerKentA2004a} % \textcite{KohlerDanielDavid2014a} first discussed how these TOs relate to traditional 3PE experiments. % Briefly, spectral peak shifts into the rephasing TOs \RomanNumeral{3} and \RomanNumeral{5} when inhomogeneous broadening creates a photon echo in the \RomanNumeral{3} and \RomanNumeral{5} rephasing pathways colored orange in \autoref{pps:fig:delay_space}. % For both phase-matching conditions, there are two separate 3PE peak shift traces (represented as black arrows in \autoref{pps:fig:delay_space}), yielding four different measurements of the photon echo. % Since both 3PE and 3PE* were measured using the same alignment on the same day, the zero delay position is identical for the four photon echo measurements. % We focus on this signature when assigning zero delay---zero is correct only when all four peak shifts agree. % Conceptually, this is the two-dimensional analogue to the traditional strategy of placing zero such that the two conjugate peak shifts (3PE and 3PE*) agree. \cite{WeinerAM1985a} % We found that the 3PEPS traces agree best when the data in \autoref{pps:fig:raw} is offset by 19 fs in $\tau_{22^\prime}$ and 4 fs in $\tau_{21}$. % The entire 3PEPS trace ($\tau$ vs $T$) is shown for regions \RomanNumeral{1}, \RomanNumeral{3} (purple and light green traces) and \RomanNumeral{5}, \RomanNumeral{6} (yellow and light blue traces) for the $\vec{k_1} - \vec{k_2} + \vec{k_{2^\prime}}$ and $\vec{k_1} + \vec{k_2} - \vec{k_{2^\prime}}$ phase matching conditions, respectively. % Peak-shift magnitudes were found with Gaussian figs on the intensity level, in accordance with 3PEPS convention. \cite{WeinerAM1985a} % The bottom subplot of \autoref{pps:fig:overtraces} shows the agreement between the four traces for $T > 50$ fs where pulse-overlap effects become negligible. % These pulse-overlap effects cause the 3PEPS at small $T$ even without inhomogeneous broadening. \cite{WeinerAM1985a} % At long $T$, the average static 3PEPS is 2.5 fs. % There is a deviation of the TO \RomanNumeral{1}-\RomanNumeral{3} 3PEPS* trace (green line) from the other traces. % It is attributed to a combination of excitation pulse distortions and line shape differences between OPA1 and OPA2 (see \autoref{pps:fig:linear}) and small errors in the zero delay correction. % \autoref{pps:fig:traces} shows what the four 3PEPS traces would llike like for different choices of zero-delay. % The inset numbers in each subplot denote the offset (from chosen zero) in each delay axis. % \begin{figure} \includegraphics[width=\linewidth]{"PEDOT_PSS/delay space"} \caption[3PE, 3PE* delay space.]{ Representation of 2D delay space. Representation of symmetry between the two phase-matched experiments performed in this work. In each two-dimensional delay space, the six TOs are labeled. Pathways III and V are rephasing (orange), all other pathways are non-rephasing (blue). Thick black arrows are drawn along the $\tau$ trace for constant T = 125 fs, with arrowheads pointing in the direction of shift for positively correlated systems. The region with signal above 10\% (processed dataset, amplitude level) is shaded to guide the eye. } \label{pps:fig:delay_space} \end{figure} \begin{figure} \includegraphics[width=\linewidth]{"PEDOT_PSS/traces"} \caption[Delay offsets.]{ Delay offsets. Comparison between 3PEPS traces at different delay offsets. Inset is D1, D2 offset in fs. } \label{pps:fig:traces} \end{figure} \begin{figure} \includegraphics[width=\linewidth]{"PEDOT_PSS/overtraces"} \caption[Peak shift traces drawn in delay space.]{ 3PEPS traces. Fully processed 2D delay scans (upper) and 3PEPS traces for both rephasing pathways and both phase matching conditions. The 3PEPS traces are shown mapped onto the 2D space (upper) and overlaid for comparison (lower). } \label{pps:fig:overtraces} \end{figure} \subsection{Numerical model} % ------------------------------------------------------------------- We simulated the 3PEPS response of PEDOT:PSS through numerical integration of the Liouville-von Neumann Equation. % Integration was performed on a homogeneous, three-level system with coherent dynamics described by \begin{equation} \frac{1}{T_2} = \frac{1}{2T_1} + \frac{1}{T_2^*}, \end{equation} where $T_2$, $T_1$ and $T_2^*$ are the net dephasing, population relaxation, and pure dephasing rates, respectively. % A three-level system was used because a two-level system cannot explain the population relaxation observed at long populations times, $T$. % This slow delcay may be the same as the slowly decaying optical nonlinearities in PEDOT:PSS. \cite{MeskersStefanCJ2003a} % Inhomogeneity was incorporated by convolving the homogeneous repsonse with a Gaussian distribution function of width $\Delta_{\mathsf{inhom}}$ and allowing the resultant polarization to interfere on the amplitude level. % This strategy captures rephasing peak shifts and ensemble dephasing. % It is difficult to determine the coherence dephasing and the inhomogeneous broadening using 3PE if both factors are large. % To extract $T_2^*$ and $\Delta_{\mathsf{inhom}}$, we focused on two key components of the dataset, coherence duration and peak shift at large $T$. % Since dephasing is very fast in PEDOT:PSS, we cannot directly respove an exponential free induction decay (FID). % Instead, our model focuses on the FWHM of the $\tau$ trace to determine the coherence duration. % At $T > 50$ fs, the transient has a FWHM of $\sim$ 80 fs (intensity level). % For comparison, our instrumental response is estimated to be 70-90 fs, depending on the exact value of our puse duration $\Delta_t$ (35-45 fs FWHM, intensity level). % An experimental peak shift of 2.5 fs was extracted using the strategy described above. % Taken together, it is clear that both pure dephasing and ensemble dephasing influence FWHM and peak shift so it is important to find valuse of $T_2^*$ and $\Delta_{\mathsf{inhom}}$ that uniquely constrain the measured response. % We simulated the $\tau$ trance for a variety of $\Delta_{\mathsf{inhom}}$ and $T_2$ values. % The results for $\Delta_t = 40$ fs are summarized in \autoref{pps:fig:parametric}. % The lines of constant $T_2$ span from $\Delta_{\mathsf{inhom}} = 0$ (green left ends of curves) to the limit $\Delta_{\mathsf{inhom}} \rightarrow \infty$ (blue right ends of curves). % The lines of constant $T_2$ demonstrate that ensemble dephasing reduces the transient duration and introduces a peak shift. % The influence of inhomogeneity on the observables vanishes as $T_2 \rightarrow \infty$. % We preformed simulations analogus to those in \autoref{pps:fig:parametric} for pulse durations longer and smaller than $\Delta_t = 40$ fs. % Longer pulse durations create solutions that do not intersect our experimental point (see right-most subplot of \autoref{pps:fig:parametric}), but shorter pulse durations do. % [TABLE] summarizes the coherence dephasing time and inomogeneous broadening values that best matches the experimental FWHM and inhomogeneous broadening value for $\Delta_t = 35, 40$ and 45 fs. % Clearly, there is no upper limit that can provide an upper limit for the inhomogeneous broadening. % Our model system does ans excellent job of reproducing the entire 2D transient within measurement error (\autoref{pps:fig:agreement}). % The most dramatic disagreement is in the upper right, where the experiment decays much slower than the simulation. % Our system description does not account for signal contributions in TOs \RomanNumeral{2} and \RomanNumeral{4}, where double quantum coherence resonances are important. % In additon, excitation pulse shapes may cause such distortions. % Regardless, these contributions do not affect our analysis. % \begin{figure} \includegraphics[width=\linewidth]{"PEDOT_PSS/parametric"} \caption[3PEPS parameter space.]{ 3PEPS parameter space. Interplay of pure and ensemble dephasing on the coherent transient duration and the peak shift value for the three pulse-widths considered in \autoref{pps:tab:table}. Red lines represent the parameters for constant values of $T_2$ and varying amounts of $\Delta_{\text{inhom}}$. The domain of possible observables is bounded (blue hash for $\Delta_{\text{inhom}} \rightarrow \inf$, green hash for $\Delta_{\text{inhom}} = 0$). Also shown is the measured FWHM for the PEDOT:PSS thin film (star). } \label{pps:fig:parametric} \end{figure} \begin{table} \begin{tabular}{ c | c c c } $\Delta_t$ (fs) & $T_2$ (fs) & $\hbar T_2^{-1}$ (meV) & $\Delta_{\mathsf{inhom}}$ (meV) \\ \hline 45 & --- & --- & --- \\ 40 & 10 & 66 & $\infty$ \\ \end{tabular} \caption[Fitted parameters.]{ Fitted parameters for the coherent transient. The FWHM of the homogeneous line shape is $\hbar T_2^{-1}$. } \label{pps:tab:table} \end{table} \begin{figure} \includegraphics[width=\linewidth]{"PEDOT_PSS/agreement"} \caption[Agreement between simulation and experiment.]{ Agreement between simulation and experiment. Experiment and simulation in the full 2D representation (left) and transient grating slices (right), for both phase matching conditions (top and bottom). The identity of each slice can be inferred from its color. In this case the displayed simulation is for $\Delta_t=35$ fs, with the appropriate $T_2$ and $\Delta_{\text{inhom}}$ as seen in \autoref{pps:tab:table}. Simulations for other pulse-widths look very similar. } \label{pps:fig:agreement} \end{figure} \section{Conclusions} % ========================================================================== To asses homogeneous and inhomogeneous linewidth, we performed ultrafast four wave mixing spectroscopy on a drop-cast PEDOT:PSS thin film. % Under Redfield theory, the homogeneous linewidth of any transition is determined by pure dephasing and population relaxation \cite{SkinnerJL1988a}, although ensemble dephasing can become relevant for very inhomogeneously broadened systems. % Three-pulse photon echo (3PE) analysis can distinguish between homogeneous and inhomogeneous broadening. \cite{WeinerAM1985a} % We collecte the transient grating population relaxation trace and 3PE traces and find that the net dephasing and population relaxation are both fast, comparable to our pulse width. % Through numerical modeling, we extract a population time of 80 fs, a homogeneous dephasing time of $<18$ fs ($>73$ meV), and an inhomogeneous broadening factor of $>43$ meV. % Extremely fast (single fs) carrier scattering time constants have also been observed for PEDOT-base conductive films. \cite{ChangYunhee1999a, ChoShinuk2005a, ZhuoJingMei2008a} %