From 40ab1463c3da0c844eedba5c5f52d5ef8af322c4 Mon Sep 17 00:00:00 2001
From: Philip Lampkin <plampkin@chem.wisc.edu>
Date: Sat, 24 Apr 2021 12:07:04 -0500
Subject: terminology update

---
 digital-driver-board/firmware/firmware.ino | 58 ++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 digital-driver-board/firmware/firmware.ino

(limited to 'digital-driver-board/firmware/firmware.ino')

diff --git a/digital-driver-board/firmware/firmware.ino b/digital-driver-board/firmware/firmware.ino
new file mode 100644
index 0000000..c024bbf
--- /dev/null
+++ b/digital-driver-board/firmware/firmware.ino
@@ -0,0 +1,58 @@
+////////////////////////////////////////////////////////////////////////////////////
+//       Digital Photoreactor Controller Slave Program Controlled by I2C          //
+//                    Run this slave program on the AtTiny85.                     //      
+////////////////////////////////////////////////////////////////////////////////////
+
+#include "TinyWireS.h"                  // wrapper class for I2C slave routines   https://github.com/rambo/TinyWire/tree/master
+
+#define I2C_SLAVE_ADDR  0x26            // I2C slave address (38, 0x26), 
+
+uint8_t master_data[1];               // global buffer to store data sent from the master.
+uint8_t master_bytes;                  // global variable to number of bytes sent from the master.
+
+const int LEDPin = 4;                  //Arduino pin 4, pin 3 on AtTiny85 pinout
+const int FanPin = 1;                  //Arduino pin 1, pin 6 on AtTiny85 pinout
+const int BlinkPin = 3;                //Arduino pin 3, pin 2 on AtTiny85 pinout
+
+void setup()
+{
+  // initialize the TinyWireS and usiTwiSlave libraries
+  TinyWireS.begin(I2C_SLAVE_ADDR);      // init I2C Slave mode
+
+  // register the onReceive() callback function
+  TinyWireS.onReceive(receiveEvent);
+  
+  pinMode(LEDPin, OUTPUT);   // set pin for LED PWM
+  pinMode(FanPin, OUTPUT);   // set pin for Fan PWM
+  pinMode(BlinkPin, OUTPUT); // set pin to blink LED
+  
+  TCCR0B = TCCR0B & 0b11111000 | 0b001; // sets internal timer of AtTiny85 to 31250 Hz for fast PWM for controlling fan speed
+}
+
+// Gets called when the ATtiny85 receives an I2C write slave request
+void receiveEvent(uint8_t num_bytes)
+{
+  uint8_t i;
+  
+  // save the number of bytes sent from the master
+  master_bytes = num_bytes;
+
+  // store the data from the master into the data buffer
+  for (i = 0; i < master_bytes; i++)
+    master_data[i] = TinyWireS.receive();
+
+  // set LED and Fan PWM duty to random byte values recieved from the master
+  analogWrite(FanPin, master_data[0]);
+  analogWrite(LEDPin, master_data[1]);
+
+  // blink LED whenever data is successfuly recieved
+  digitalWrite(BlinkPin, HIGH);
+  delay(10);
+  digitalWrite(BlinkPin, LOW);
+
+}
+
+void loop()
+{
+  
+}
-- 
cgit v1.2.3