From 024cd56cc903a255779e3a189d08f6e45c6d1097 Mon Sep 17 00:00:00 2001 From: Blaise Thompson Date: Tue, 9 Mar 2021 13:54:56 -0600 Subject: readme formatting --- firmware/README.md | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/firmware/README.md b/firmware/README.md index 2159734..1cea550 100644 --- a/firmware/README.md +++ b/firmware/README.md @@ -1,12 +1,9 @@ # mqtt-weather-station firmware -This project uses [micropython](https://micropython.org/), specifically [microhomie](https://github.com/microhomie/microhomie). -Currently we build on microhomie-esp8266-v3.0.2, the binary is in the folder. +This project uses [micropython](https://micropython.org/), specifically [microhomie](https://github.com/microhomie/microhomie). Currently we build on microhomie-esp8266-v3.0.2, the binary is in the folder. -You must define the private information defined in `settings.py`. -Copy `settings.py.example` to make a folder `settings.py` and define all relevant variables. +You must define the private information defined in `settings.py`. Copy `settings.py.example` to make a folder `settings.py` and define all relevant variables. -Run `flash.sh` to flash the board. -You will need [esptool](https://github.com/espressif/esptool) and [ampy](https://github.com/scientifichackers/ampy). +Run `flash.sh` to flash the board. You will need [esptool](https://github.com/espressif/esptool) and [ampy](https://github.com/scientifichackers/ampy). We recommend an [FTDI Basic Breakout](https://www.sparkfun.com/products/9716) to physically program the ESP8266. -- cgit v1.2.3